System Variables
TiDB system variables behave similar to MySQL, in that settings apply on a SESSION
or GLOBAL
scope:
- Changes on a
SESSION
scope will only affect the current session. - Changes on a
GLOBAL
scope apply immediately. If this variable is alsoSESSION
scoped, all sessions (including your session) will continue to use their current session value. - Changes are made using the
SET
statement:
# These two identical statements change a session variable
SET tidb_distsql_scan_concurrency = 10;
SET SESSION tidb_distsql_scan_concurrency = 10;
# These two identical statements change a global variable
SET @@global.tidb_distsql_scan_concurrency = 10;
SET GLOBAL tidb_distsql_scan_concurrency = 10;
Starting from v7.4.0, you can temporarily modify the value of some SESSION
variables during statement execution using SET_VAR
. After the statement is executed, the value of the system variable in the current session is automatically changed back to the original value. This hint can be used to modify some system variables related to the optimizer and executor. Variables in this document have a Applies to hint SET_VAR
setting, which can be configured to Yes
or No
.
- For variables with the
Applies to hint SET_VAR: Yes
setting, you can use theSET_VAR
hint to modify the value of the system variable in the current session during statement execution. - For variables with the
Applies to hint SET_VAR: No
setting, you cannot use theSET_VAR
hint to modify the value of the system variable in the current session during statement execution.
For more information about the SET_VAR
hint, see SET_VAR.
Variable reference
allow_auto_random_explicit_insert New in v4.0.3
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- Determines whether to allow explicitly specifying the values of the column with the
AUTO_RANDOM
attribute in theINSERT
statement.
authentication_ldap_sasl_auth_method_name New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
SCRAM-SHA-1
- Possible values:
SCRAM-SHA-1
,SCRAM-SHA-256
, andGSSAPI
. - For LDAP SASL authentication, this variable specifies the authentication method name.
authentication_ldap_sasl_bind_base_dn New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: String
- Default value: ""
- For LDAP SASL authentication, this variable limits the search scope within the search tree. If a user is created without the
AS ...
clause, TiDB will automatically search thedn
in LDAP server according to the user name.
authentication_ldap_sasl_bind_root_dn New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: String
- Default value: ""
- For LDAP SASL authentication, this variable specifies the
dn
used to log in to the LDAP server to search users.
authentication_ldap_sasl_bind_root_pwd New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: String
- Default value: ""
- For LDAP SASL authentication, this variable specifies the password used to log in to the LDAP server to search users.
authentication_ldap_sasl_ca_path New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: String
- Default value: ""
- For LDAP SASL authentication, this variable specifies the absolute path of the certificate authority file for StartTLS connections.
authentication_ldap_sasl_init_pool_size New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
10
- Range:
[1, 32767]
- For LDAP SASL authentication, this variable specifies the initial connections in the connection pool to the LDAP server.
authentication_ldap_sasl_max_pool_size New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1000
- Range:
[1, 32767]
- For LDAP SASL authentication, this variable specifies the maximum connections in the connection pool to the LDAP server.
authentication_ldap_sasl_server_host New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: String
- Default value: ""
- For LDAP SASL authentication, this variable specifies the LDAP server host name or IP address.
authentication_ldap_sasl_server_port New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
389
- Range:
[1, 65535]
- For LDAP SASL authentication, this variable specifies the TCP/IP port number of the LDAP server.
authentication_ldap_sasl_tls New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- For LDAP SASL authentication, this variable controls whether connections by the plugin to the LDAP server are protected with StartTLS.
authentication_ldap_simple_auth_method_name New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
SIMPLE
- Possible values:
SIMPLE
. - For LDAP simple authentication, this variable specifies the authentication method name. The only supported value is
SIMPLE
.
authentication_ldap_simple_bind_base_dn New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: String
- Default value: ""
- For LDAP simple authentication, this variable limits the search scope within the search tree. If a user is created without the
AS ...
clause, TiDB will automatically search thedn
in LDAP server according to the user name.
authentication_ldap_simple_bind_root_dn New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: String
- Default value: ""
- For LDAP simple authentication, this variable specifies the
dn
used to log in to the LDAP server to search users.
authentication_ldap_simple_bind_root_pwd New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: String
- Default value: ""
- For LDAP simple authentication, this variable specifies the password used to log in to the LDAP server to search users.
authentication_ldap_simple_ca_path New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: String
- Default value: ""
- For LDAP simple authentication, this variable specifies the absolute path of the certificate authority file for StartTLS connections.
authentication_ldap_simple_init_pool_size New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
10
- Range:
[1, 32767]
- For LDAP simple authentication, this variable specifies the initial connections in the connection pool to the LDAP server.
authentication_ldap_simple_max_pool_size New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1000
- Range:
[1, 32767]
- For LDAP simple authentication, this variable specifies the maximum connections in the connection pool to the LDAP server.
authentication_ldap_simple_server_host New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: String
- Default value: ""
- For LDAP simple authentication, this variable specifies the LDAP server host name or IP address.
authentication_ldap_simple_server_port New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
389
- Range:
[1, 65535]
- For LDAP simple authentication, this variable specifies the TCP/IP port number of the LDAP server.
authentication_ldap_simple_tls New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- For LDAP simple authentication, this variable controls whether connections by the plugin to the LDAP server are protected with StartTLS.
auto_increment_increment
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1
- Range:
[1, 65535]
- Controls the step size of
AUTO_INCREMENT
values to be allocated to a column, and allocation rules forAUTO_RANDOM
IDs. It is often used in combination withauto_increment_offset
.
auto_increment_offset
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1
- Range:
[1, 65535]
- Controls the initial offset of
AUTO_INCREMENT
values to be allocated to a column, and allocation rules forAUTO_RANDOM
IDs. This setting is often used in combination withauto_increment_increment
. For example:
mysql> CREATE TABLE t1 (a int not null primary key auto_increment);
Query OK, 0 rows affected (0.10 sec)
mysql> set auto_increment_offset=1;
Query OK, 0 rows affected (0.00 sec)
mysql> set auto_increment_increment=3;
Query OK, 0 rows affected (0.00 sec)
mysql> INSERT INTO t1 VALUES (),(),(),();
Query OK, 4 rows affected (0.04 sec)
Records: 4 Duplicates: 0 Warnings: 0
mysql> SELECT * FROM t1;
+----+
| a |
+----+
| 1 |
| 4 |
| 7 |
| 10 |
+----+
4 rows in set (0.00 sec)
autocommit
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- Controls whether statements should automatically commit when not in an explicit transaction. See Transaction Overview for more information.
block_encryption_mode
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
aes-128-ecb
- Value options:
aes-128-ecb
,aes-192-ecb
,aes-256-ecb
,aes-128-cbc
,aes-192-cbc
,aes-256-cbc
,aes-128-ofb
,aes-192-ofb
,aes-256-ofb
,aes-128-cfb
,aes-192-cfb
,aes-256-cfb
- This variable sets the encryption mode for the built-in functions
AES_ENCRYPT()
andAES_DECRYPT()
.
character_set_client
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
utf8mb4
- The character set for data sent from the client. See Character Set and Collation for details on the use of character sets and collations in TiDB. It is recommended to use
SET NAMES
to change the character set when needed.
character_set_connection
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
utf8mb4
- The character set for string literals that do not have a specified character set.
character_set_database
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
utf8mb4
- This variable indicates the character set of the default database in use. It is NOT recommended to set this variable. When a new default database is selected, the server changes the variable value.
character_set_results
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
utf8mb4
- The character set that is used when data is sent to the client.
character_set_server
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
utf8mb4
- The default character set for the server.
collation_connection
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
utf8mb4_bin
- This variable indicates the collation used in the current connection. It is consistent with the MySQL variable
collation_connection
.
collation_database
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
utf8mb4_bin
- This variable indicates the default collation of the database in use. It is NOT recommended to set this variable. When a new database is selected, TiDB changes this variable value.
collation_server
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
utf8mb4_bin
- The default collation used when the database is created.
cte_max_recursion_depth
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
1000
- Range:
[0, 4294967295]
- Controls the maximum recursion depth in Common Table Expressions.
datadir
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: it depends on the component and the deployment method.
/tmp/tidb
: when you set"unistore"
for--store
or if you don't set--store
.${pd-ip}:${pd-port}
: when you use TiKV, which is the default storage engine for TiUP and TiDB Operator for Kubernetes deployments.
- This variable indicates the location where data is stored. This location can be a local path
/tmp/tidb
, or point to a PD server if the data is stored on TiKV. A value in the format of${pd-ip}:${pd-port}
indicates the PD server that TiDB connects to on startup.
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: it depends on the component and the deployment method.
/tmp/tidb
: when you set"unistore"
for--store
or if you don't set--store
.${pd-ip}:${pd-port}
: when you use TiKV, which is the default storage engine for TiUP and TiDB Operator for Kubernetes deployments.
- This variable indicates the location where data is stored. This location can be a local path
/tmp/tidb
, or point to a PD server if the data is stored on TiKV. A value in the format of${pd-ip}:${pd-port}
indicates the PD server that TiDB connects to on startup.
ddl_slow_threshold
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
300
- Range:
[0, 2147483647]
- Unit: Milliseconds
- Log DDL operations whose execution time exceeds the threshold value.
default_authentication_plugin
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
mysql_native_password
- Possible values:
mysql_native_password
,caching_sha2_password
,tidb_sm3_password
,tidb_auth_token
,authentication_ldap_sasl
, andauthentication_ldap_simple
. - This variable sets the authentication method that the server advertises when the server-client connection is being established.
- To authenticate using the
tidb_sm3_password
method, you can connect to TiDB using TiDB-JDBC.
For more possible values of this variable, see Authentication plugin status.
default_collation_for_utf8mb4 New in v7.4.0
- Scope: GLOBAL | SESSION
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: String
- Default value:
utf8mb4_bin
- Value options:
utf8mb4_bin
,utf8mb4_general_ci
,utf8mb4_0900_ai_ci
- This variable is used to set the default collation for the
utf8mb4
character set. It affects the behavior of the following statements:- The default collation displayed in the
SHOW COLLATION
andSHOW CHARACTER SET
statements. - If
CREATE TABLE
andALTER TABLE
statements contain theCHARACTER SET utf8mb4
clause against a table or a column without specifying a collation, the collation specified by this variable is used. This does not affect the behavior whenCHARACTER SET
clause is not used. - If
CREATE DATABASE
andALTER DATABASE
statements containCHARACTER SET utf8mb4
clause without specifying a collation, the collation specified by this variable is used. This does not affect the behavior whenCHARACTER SET
clause is not used. - If the
COLLATE
clause is not used, any literal string in the format of_utf8mb4'string'
uses the collation specified by this variable.
- The default collation displayed in the
default_password_lifetime New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 65535]
- Sets the global policy for automatic password expiration. The default value
0
indicates that the password never expires. If this system variable is set to a positive integerN
, it means that the password lifetime isN
days, and you must change your password withinN
days.
default_week_format
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 7]
- Sets the week format used by the
WEEK()
function.
disconnect_on_expired_password New in v6.5.0
- Scope: GLOBAL
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is read-only. It indicates whether TiDB disconnects the client connection when the password is expired. If the variable is set to
ON
, the client connection is disconnected when the password is expired. If the variable is set toOFF
, the client connection is restricted to the "sandbox mode" and the user can only execute the password reset operation.
- If you need to change the behavior of the client connection for the expired password, modify the
security.disconnect-on-expired-password
configuration item in the configuration file.
- If you need to change the default behavior of the client connection for the expired password, contact TiDB Cloud Support.
div_precision_increment New in v8.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
4
- Range:
[0, 30]
- This variable specifies the number of digits by which to increase the scale of the result of a division operation performed using the
/
operator. This variable is the same as MySQL.
error_count
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- A read-only variable that indicates the number of errors that resulted from the last statement that generated messages.
foreign_key_checks
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value: Before v6.6.0, the default value is
OFF
. Starting from v6.6.0, the default value isON
. - This variable controls whether to enable foreign key constraint checking.
group_concat_max_len
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1024
- Range:
[4, 18446744073709551615]
- The maximum buffer size for items in the
GROUP_CONCAT()
function.
have_openssl
- Scope: NONE
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
DISABLED
- A read-only variable for MySQL compatibility. Set to
YES
by the server when the server has TLS enabled.
have_ssl
- Scope: NONE
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
DISABLED
- A read-only variable for MySQL compatibility. Set to
YES
by the server when the server has TLS enabled.
hostname
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: (system hostname)
- The hostname of the TiDB server as a read-only variable.
identity New in v5.3.0
This variable is an alias for last_insert_id
.
init_connect
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value: ""
- The
init_connect
feature permits a SQL statement to be automatically executed when you first connect to a TiDB server. If you have theCONNECTION_ADMIN
orSUPER
privileges, thisinit_connect
statement will not be executed. If theinit_connect
statement results in an error, your user connection will be terminated.
innodb_lock_wait_timeout
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
50
- Range:
[1, 3600]
- Unit: Seconds
- The lock wait timeout for pessimistic transactions (default).
interactive_timeout
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
28800
- Range:
[1, 31536000]
- Unit: Seconds
- This variable represents the idle timeout of the interactive user session. Interactive user session refers to the session established by calling
mysql_real_connect()
API using theCLIENT_INTERACTIVE
option (for example, MySQL Shell and MySQL Client). This variable is fully compatible with MySQL.
last_insert_id
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 18446744073709551615]
- This variable returns the last
AUTO_INCREMENT
orAUTO_RANDOM
value generated by an insert statement. - The value of
last_insert_id
is the same as the value returned by the functionLAST_INSERT_ID()
.
last_plan_from_binding New in v4.0
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to show whether the execution plan used in the previous statement was influenced by a plan binding
last_plan_from_cache New in v4.0
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to show whether the execution plan used in the previous
execute
statement is taken directly from the plan cache.
last_sql_use_alloc New in v6.4.0
- Scope: SESSION
- Applies to hint SET_VAR: No
- Default value:
OFF
- This variable is read-only. It is used to show whether the previous statement uses a cached chunk object (chunk allocation).
license
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value:
Apache License 2.0
- This variable indicates the license of your TiDB server installation.
log_bin
- Scope: NONE
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable indicates whether TiDB Binlog is used.
max_allowed_packet New in v6.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
67108864
- Range:
[1024, 1073741824]
- The value should be an integer multiple of 1024. If the value is not divisible by 1024, a warning will be prompted and the value will be rounded down. For example, when the value is set to 1025, the actual value in TiDB is 1024.
- The maximum packet size allowed by the server and the client in one transmission of packets.
- In the
SESSION
scope, this variable is read-only. - This variable is compatible with MySQL.
password_history New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 4294967295]
- This variable is used to establish a password reuse policy that allows TiDB to limit password reuse based on the number of password changes. The default value
0
means disabling the password reuse policy based on the number of password changes. When this variable is set to a positive integerN
, the reuse of the lastN
passwords is not allowed.
mpp_exchange_compression_mode New in v6.6.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Default value:
UNSPECIFIED
- Value options:
NONE
,FAST
,HIGH_COMPRESSION
,UNSPECIFIED
- This variable is used to specify the data compression mode of the MPP Exchange operator. This variable takes effect when TiDB selects the MPP execution plan with the version number
1
. The meanings of the variable values are as follows:UNSPECIFIED
: means unspecified. TiDB will automatically select the compression mode. Currently, TiDB automatically selects theFAST
mode.NONE
: no data compression is used.FAST
: fast mode. The overall performance is good and the compression ratio is less thanHIGH_COMPRESSION
.HIGH_COMPRESSION
: the high compression ratio mode.
mpp_version New in v6.6.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Default value:
UNSPECIFIED
- Value options:
UNSPECIFIED
,0
,1
- This variable is used to specify different versions of the MPP execution plan. After a version is specified, TiDB selects the specified version of the MPP execution plan. The meanings of the variable values are as follows:
UNSPECIFIED
: means unspecified. TiDB automatically selects the latest version1
.0
: compatible with all TiDB cluster versions. Features with the MPP version greater than0
do not take effect in this mode.1
: new in v6.6.0, used to enable data exchange with compression on TiFlash. For details, see MPP version and exchange data compression.
password_reuse_interval New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 4294967295]
- This variable is used to establish a password reuse policy that allows TiDB to limit password reuse based on time elapsed. The default value
0
means disabling the password reuse policy based on time elapsed. When this variable is set to a positive integerN
, the reuse of any password used in the lastN
days is not allowed.
max_connections
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 100000]
- The maximum number of concurrent connections permitted for a single TiDB instance. This variable can be used for resources control.
- The default value
0
means no limit. When the value of this variable is larger than0
, and the number of connections reaches the value, the TiDB server rejects new connections from clients.
max_execution_time
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
0
- Range:
[0, 2147483647]
- Unit: Milliseconds
- The maximum execution time of a statement. The default value is unlimited (zero).
For a SQL statement with the MAX_EXECUTION_TIME
hint, the maximum execution time of this statement is limited by the hint instead of this variable. The hint can also be used with SQL bindings as described in the SQL FAQ.
For a SQL statement with the MAX_EXECUTION_TIME
hint, the maximum execution time of this statement is limited by the hint instead of this variable. The hint can also be used with SQL bindings as described in the SQL FAQ.
max_prepared_stmt_count
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
-1
- Range:
[-1, 1048576]
- Specifies the maximum number of
PREPARE
statements in the current TiDB instance. - The value of
-1
means no limit on the maximum number ofPREPARE
statements in the current TiDB instance. - If you set the variable to a value that exceeds the upper limit
1048576
,1048576
is used instead:
mysql> SET GLOBAL max_prepared_stmt_count = 1048577;
Query OK, 0 rows affected, 1 warning (0.01 sec)
mysql> SHOW WARNINGS;
+---------+------+--------------------------------------------------------------+
| Level | Code | Message |
+---------+------+--------------------------------------------------------------+
| Warning | 1292 | Truncated incorrect max_prepared_stmt_count value: '1048577' |
+---------+------+--------------------------------------------------------------+
1 row in set (0.00 sec)
mysql> SHOW GLOBAL VARIABLES LIKE 'max_prepared_stmt_count';
+-------------------------+---------+
| Variable_name | Value |
+-------------------------+---------+
| max_prepared_stmt_count | 1048576 |
+-------------------------+---------+
1 row in set (0.00 sec)
pd_enable_follower_handle_region New in v7.6.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enable the Active PD Follower feature (currently only applicable to requests for Region information). When the value is
OFF
, TiDB only obtains Region information from the PD leader. When the value isON
, TiDB evenly distributes requests for Region information to all PD servers, and PD followers can also handle Region requests, thereby reducing the CPU pressure on the PD leader. - Scenarios for enabling Active PD Follower:
- In a cluster with a large number of Regions, the PD leader experiences high CPU pressure due to the increased overhead of handling heartbeats and scheduling tasks.
- In a TiDB cluster with many TiDB instances, the PD leader experiences high CPU pressure due to a high concurrency of requests for Region information.
plugin_dir
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Default value: ""
- Indicates the directory to load plugins as specified by a command-line flag.
plugin_load
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Default value: ""
- Indicates the plugins to load when TiDB is started. These plugins are specified by a command-line flag and separated by commas.
port
- Scope: NONE
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
4000
- Range:
[0, 65535]
- The port that the
tidb-server
is listening on when speaking the MySQL protocol.
rand_seed1
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 2147483647]
- This variable is used to seed the random value generator used in the
RAND()
SQL function. - The behavior of this variable is MySQL compatible.
rand_seed2
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 2147483647]
- This variable is used to seed the random value generator used in the
RAND()
SQL function. - The behavior of this variable is MySQL compatible.
require_secure_transport New in v6.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
for TiDB Self-Hosted and TiDB Dedicated,ON
for TiDB Serverless
- This variable ensures that all connections to TiDB are either on a local socket, or using TLS. See Enable TLS between TiDB Clients and Servers for additional details.
- This variable ensures that all connections to TiDB are either on a local socket, or using TLS.
- Setting this variable to
ON
requires you to connect to TiDB from a session that has TLS enabled. This helps prevent lock-out scenarios when TLS is not configured correctly. - This setting was previously a
tidb.toml
option (security.require-secure-transport
), but changed to a system variable starting from TiDB v6.1.0. - Starting from v6.5.6, v7.1.2, v7.5.1, and v8.0.0, when Security Enhanced Mode (SEM) is enabled, setting this variable to
ON
is prohibited to avoid potential connectivity issues for users.
skip_name_resolve New in v5.2.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether the
tidb-server
instance resolves hostnames as a part of the connection handshake. - When the DNS is unreliable, you can enable this option to improve network performance.
socket
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: ""
- The local unix socket file that the
tidb-server
is listening on when speaking the MySQL protocol.
sql_log_bin
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- Indicates whether to write changes to TiDB Binlog or not.
sql_mode
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Default value:
ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION
- This variable controls a number of MySQL compatibility behaviors. See SQL Mode for more information.
sql_require_primary_key New in v6.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enforce the requirement that a table has a primary key. After this variable is enabled, attempting to create or alter a table without a primary key will produce an error.
- This feature is based on the similarly named
sql_require_primary_key
in MySQL 8.0. - It is strongly recommended to enable this variable when using TiCDC. This is because replicating changes to a MySQL sink requires that tables have a primary key.
- If you enable this variable and are using TiDB Data Migration (DM) to migrate data, it is recommended that you add
sql_require_ primary_key
to thesession
part in the DM Task Configuration File and set it toOFF
. Otherwise, it will cause DM to fail to create tasks.
sql_select_limit New in v4.0.2
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
18446744073709551615
- Range:
[0, 18446744073709551615]
- Unit: Rows
- The maximum number of rows returned by the
SELECT
statements.
ssl_ca
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: ""
- The location of the certificate authority file (if there is one). The value of this variable is defined by the TiDB configuration item
ssl-ca
.
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: ""
- The location of the certificate authority file (if there is one). The value of this variable is defined by the TiDB configuration item
ssl-ca
.
ssl_cert
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: ""
- The location of the certificate file (if there is a file) that is used for SSL/TLS connections. The value of this variable is defined by the TiDB configuration item
ssl-cert
.
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: ""
- The location of the certificate file (if there is a file) that is used for SSL/TLS connections. The value of this variable is defined by the TiDB configuration item
ssl-cert
.
ssl_key
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: ""
- The location of the private key file (if there is one) that is used for SSL/TLS connections. The value of this variable is defined by TiDB configuration item
ssl-key
.
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: ""
- The location of the private key file (if there is one) that is used for SSL/TLS connections. The value of this variable is defined by TiDB configuration item
ssl-key
.
system_time_zone
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: (system dependent)
- This variable shows the system time zone from when TiDB was first bootstrapped. See also
time_zone
.
tidb_adaptive_closest_read_threshold New in v6.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
4096
- Range:
[0, 9223372036854775807]
- Unit: Bytes
- This variable is used to control the threshold at which the TiDB server prefers to send read requests to a replica in the same availability zone as the TiDB server when
tidb_replica_read
is set toclosest-adaptive
. If the estimated result is higher than or equal to this threshold, TiDB prefers to send read requests to a replica in the same availability zone. Otherwise, TiDB sends read requests to the leader replica.
tidb_allow_tiflash_cop New in v7.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- When TiDB pushes computation tasks down to TiFlash, there are three methods (or protocols) to choose from: Cop, BatchCop, and MPP. Compared to Cop and BatchCop, the MPP protocol is more mature and offers better task and resource management. Therefore, it is recommended to use the MPP protocol.
0
orOFF
: the optimizer only generates plans using the TiFlash MPP protocol.1
orON
: the optimizer determines whether to use the Cop, BatchCop, or MPP protocol to generate execution plans based on the cost estimation.
tidb_allow_batch_cop New in v4.0
Scope: SESSION | GLOBAL
Persists to cluster: Yes
Applies to hint SET_VAR: Yes
Type: Integer
Default value:
1
Range:
[0, 2]
This variable is used to control how TiDB sends a coprocessor request to TiFlash. It has the following values:
0
: Never send requests in batches1
: Aggregation and join requests are sent in batches2
: All coprocessor requests are sent in batches
tidb_allow_fallback_to_tikv New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Default value: ""
- This variable is used to specify a list of storage engines that might fall back to TiKV. If the execution of a SQL statement fails due to a failure of the specified storage engine in the list, TiDB retries executing this SQL statement with TiKV. This variable can be set to "" or "tiflash". When this variable is set to "tiflash", if TiFlash returns a timeout error (error code: ErrTiFlashServerTimeout), TiDB retries executing this SQL statement with TiKV.
tidb_allow_function_for_expression_index New in v5.2.0
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value:
json_array, json_array_append, json_array_insert, json_contains, json_contains_path, json_depth, json_extract, json_insert, json_keys, json_length, json_merge_patch, json_merge_preserve, json_object, json_pretty, json_quote, json_remove, json_replace, json_search, json_set, json_storage_size, json_type, json_unquote, json_valid, lower, md5, reverse, tidb_shard, upper, vitess_hash
- This read-only variable is used to show the functions that are allowed to be used for creating expression indexes.
tidb_allow_mpp New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
ON
- Controls whether to use the MPP mode of TiFlash to execute queries. The value options are as follows:
0
orOFF
, which means that the MPP mode will not be used. For v7.3.0 or a later version, if you set the value of this variable to0
orOFF
, you also need to enable thetidb_allow_tiflash_cop
variable. Otherwise, queries might return errors.1
orON
, which means that the optimizer determines whether to use the MPP mode based on the cost estimation (by default).
MPP is a distributed computing framework provided by the TiFlash engine, which allows data exchange between nodes and provides high-performance, high-throughput SQL algorithms. For details about the selection of the MPP mode, refer to Control whether to select the MPP mode.
tidb_allow_remove_auto_inc New in v2.1.18 and v3.0.4
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to set whether the
AUTO_INCREMENT
property of a column is allowed to be removed by executingALTER TABLE MODIFY
orALTER TABLE CHANGE
statements. It is not allowed by default.
tidb_analyze_distsql_scan_concurrency New in v7.6.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
4
- Range:
[0, 4294967295]
. In versions earlier than v8.2.0, the minimum value is1
. When you set it to0
, it adaptively adjusts the concurrency based on the cluster size. - This variable is used to set the concurrency of the
scan
operation when executing theANALYZE
operation.
tidb_analyze_partition_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
2
. The default value is1
for v7.4.0 and earlier versions. - This variable specifies the concurrency of reading and writing statistics for a partitioned table when TiDB analyzes the partitioned table.
tidb_analyze_version New in v5.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
2
- Range:
[1, 2]
- Controls how TiDB collects statistics.
- For TiDB Self-Hosted, the default value of this variable changes from
1
to2
starting from v5.3.0. - For TiDB Cloud, the default value of this variable changes from
1
to2
starting from v6.5.0. - If your cluster is upgraded from an earlier version, the default value of
tidb_analyze_version
does not change after the upgrade.
- For TiDB Self-Hosted, the default value of this variable changes from
- For detailed introduction about this variable, see Introduction to Statistics.
tidb_analyze_skip_column_types New in v7.2.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value: "json,blob,mediumblob,longblob,mediumtext,longtext". Before v8.2.0, the default value is "json,blob,mediumblob,longblob".
- Possible values: "json,blob,mediumblob,longblob,text,mediumtext,longtext"
- This variable controls which types of columns are skipped for statistics collection when executing the
ANALYZE
command to collect statistics. The variable is only applicable fortidb_analyze_version = 2
. Even if you specify a column usingANALYZE TABLE t COLUMNS c1, ... , cn
, no statistics will be collected for the specified column if its type is intidb_analyze_skip_column_types
.
mysql> SHOW CREATE TABLE t;
+-------+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Table | Create Table |
+-------+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| t | CREATE TABLE `t` (
`a` int(11) DEFAULT NULL,
`b` varchar(10) DEFAULT NULL,
`c` json DEFAULT NULL,
`d` blob DEFAULT NULL,
`e` longblob DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_bin |
+-------+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
1 row in set (0.00 sec)
mysql> SELECT @@tidb_analyze_skip_column_types;
+----------------------------------+
| @@tidb_analyze_skip_column_types |
+----------------------------------+
| json,blob,mediumblob,longblob |
+----------------------------------+
1 row in set (0.00 sec)
mysql> ANALYZE TABLE t;
Query OK, 0 rows affected, 1 warning (0.05 sec)
mysql> SELECT job_info FROM mysql.analyze_jobs ORDER BY end_time DESC LIMIT 1;
+---------------------------------------------------------------------+
| job_info |
+---------------------------------------------------------------------+
| analyze table columns a, b with 256 buckets, 500 topn, 1 samplerate |
+---------------------------------------------------------------------+
1 row in set (0.00 sec)
mysql> ANALYZE TABLE t COLUMNS a, c;
Query OK, 0 rows affected, 1 warning (0.04 sec)
mysql> SELECT job_info FROM mysql.analyze_jobs ORDER BY end_time DESC LIMIT 1;
+------------------------------------------------------------------+
| job_info |
+------------------------------------------------------------------+
| analyze table columns a with 256 buckets, 500 topn, 1 samplerate |
+------------------------------------------------------------------+
1 row in set (0.00 sec)
tidb_auto_analyze_end_time
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Time
- Default value:
23:59 +0000
- This variable is used to restrict the time window that the automatic update of statistics is permitted. For example, to only allow automatic statistics updates between 1 AM and 3 AM in UTC time, set
tidb_auto_analyze_start_time='01:00 +0000'
andtidb_auto_analyze_end_time='03:00 +0000'
.
tidb_auto_analyze_partition_batch_size New in v6.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
128
. Before v7.6.0, the default value is1
. - Range:
[1, 1024]
- This variable specifies the number of partitions that TiDB automatically analyzes when analyzing a partitioned table (which means automatically collecting statistics on a partitioned table).
- If the value of this variable is smaller than the number of partitions, TiDB automatically analyzes all partitions of the partitioned table in multiple batches. If the value of this variable is greater than or equal to the number of partitions, TiDB analyzes all partitions of the partitioned table at the same time.
- If the number of partitions of a partitioned table is far greater than this variable value and the auto-analyze takes a long time, you can increase the value of this variable to reduce the time consumption.
tidb_auto_analyze_ratio
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Float
- Default value:
0.5
- Range:
(0, 1]
. The range for v8.0.0 and earlier versions is[0, 18446744073709551615]
. - This variable is used to set the threshold when TiDB automatically executes
ANALYZE TABLE
in a background thread to update table statistics. For example, a value of 0.5 means that auto-analyze is triggered when greater than 50% of the rows in a table have been modified. Auto-analyze can be restricted to only execute during certain hours of the day by specifyingtidb_auto_analyze_start_time
andtidb_auto_analyze_end_time
.
tidb_auto_analyze_start_time
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Time
- Default value:
00:00 +0000
- This variable is used to restrict the time window that the automatic update of statistics is permitted. For example, to only allow automatic statistics updates between 1 AM and 3 AM in UTC time, set
tidb_auto_analyze_start_time='01:00 +0000'
andtidb_auto_analyze_end_time='03:00 +0000'
.
tidb_auto_build_stats_concurrency New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1
- Range:
[1, 256]
- This variable is used to set the concurrency of executing the automatic update of statistics.
tidb_backoff_lock_fast
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
10
- Range:
[1, 2147483647]
- This variable is used to set the
backoff
time when the read request meets a lock.
tidb_backoff_weight
Scope: SESSION | GLOBAL
Persists to cluster: Yes
Applies to hint SET_VAR: No
Type: Integer
Default value:
2
Range:
[0, 2147483647]
This variable is used to increase the weight of the maximum time of TiDB
backoff
, that is, the maximum retry time for sending a retry request when an internal network or other component (TiKV, PD) failure is encountered. This variable can be used to adjust the maximum retry time and the minimum value is 1.For example, the base timeout for TiDB to take TSO from PD is 15 seconds. When
tidb_backoff_weight = 2
, the maximum timeout for taking TSO is: base time * 2 = 30 seconds.In the case of a poor network environment, appropriately increasing the value of this variable can effectively alleviate error reporting to the application end caused by timeout. If the application end wants to receive the error information more quickly, minimize the value of this variable.
tidb_batch_commit
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- The variable is used to control whether to enable the deprecated batch-commit feature. When this variable is enabled, a transaction might be split into multiple transactions by grouping a few statements and committed non-atomically, which is not recommended.
tidb_batch_delete
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether to enable the batch-delete feature, which is a part of the deprecated batch-dml feature. When this variable is enabled,
DELETE
statements might be split into multiple transactions and committed non-atomically. To make it work, you also need to enabletidb_enable_batch_dml
and set a positive value fortidb_dml_batch_size
, which is not recommended.
tidb_batch_insert
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether to enable the batch-insert feature, which is a part of the deprecated batch-dml feature. When this variable is enabled,
INSERT
statements might be split into multiple transactions and committed non-atomically. To make it work, you also need to enabletidb_enable_batch_dml
and set a positive value fortidb_dml_batch_size
, which is not recommended.
tidb_batch_pending_tiflash_count New in v6.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
4000
- Range:
[0, 4294967295]
- Specifies the maximum number of permitted unavailable tables when you use
ALTER DATABASE SET TIFLASH REPLICA
to add TiFlash replicas. If the number of unavailable tables exceeds this limit, the operation will be stopped or setting TiFlash replicas for the remaining tables will be very slow.
tidb_broadcast_join_threshold_count New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
10240
- Range:
[0, 9223372036854775807]
- Unit: Rows
- If the objects of the join operation belong to a subquery, the optimizer cannot estimate the size of the subquery result set. In this situation, the size is determined by the number of rows in the result set. If the estimated number of rows in the subquery is less than the value of this variable, the Broadcast Hash Join algorithm is used. Otherwise, the Shuffled Hash Join algorithm is used.
- This variable will not take effect after
tidb_prefer_broadcast_join_by_exchange_data_size
is enabled.
tidb_broadcast_join_threshold_size New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
104857600
(100 MiB) - Range:
[0, 9223372036854775807]
- Unit: Bytes
- If the table size is less than the value of the variable, the Broadcast Hash Join algorithm is used. Otherwise, the Shuffled Hash Join algorithm is used.
- This variable will not take effect after
tidb_prefer_broadcast_join_by_exchange_data_size
is enabled.
tidb_build_stats_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
2
. The default value is4
for v7.4.0 and earlier versions. - Range:
[1, 256]
- Unit: Threads
- This variable is used to set the concurrency of executing the
ANALYZE
statement. - When the variable is set to a larger value, the execution performance of other queries is affected.
tidb_build_sampling_stats_concurrency New in v7.5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Unit: Threads
- Default value:
2
- Range:
[1, 256]
- This variable is used to set the sampling concurrency in the
ANALYZE
process. - When the variable is set to a larger value, the execution performance of other queries is affected.
tidb_capture_plan_baselines New in v4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether to enable the baseline capturing feature. This feature depends on the statement summary, so you need to enable the statement summary before you use baseline capturing.
- After this feature is enabled, the historical SQL statements in the statement summary are traversed periodically, and bindings are automatically created for SQL statements that appear at least twice.
tidb_cdc_write_source New in v6.5.0
- Scope: SESSION
- Persists to cluster: No
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 15]
- When this variable is set to a value other than 0, data written in this session is considered to be written by TiCDC. This variable can only be modified by TiCDC. Do not manually modify this variable in any case.
tidb_check_mb4_value_in_utf8
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to enforce that the
utf8
character set only stores values from the Basic Multilingual Plane (BMP). To store characters outside the BMP, it is recommended to use theutf8mb4
character set. - You might need to disable this option when upgrading your cluster from an earlier version of TiDB where the
utf8
checking was more relaxed. For details, see FAQs After Upgrade.
tidb_checksum_table_concurrency
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
4
- Range:
[1, 256]
- Unit: Threads
- This variable is used to set the scan index concurrency of executing the
ADMIN CHECKSUM TABLE
statement. - When the variable is set to a larger value, the execution performance of other queries is affected.
tidb_committer_concurrency New in v6.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
128
- Range:
[1, 10000]
- The number of goroutines for requests related to executing commit in the commit phase of the single transaction.
- If the transaction to commit is too large, the waiting time for the flow control queue when the transaction is committed might be too long. In this situation, you can increase the configuration value to speed up the commit.
- This setting was previously a
tidb.toml
option (performance.committer-concurrency
), but changed to a system variable starting from TiDB v6.1.0.
tidb_config
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Default value: ""
- This variable is read-only. It is used to obtain the configuration information of the current TiDB server.
tidb_constraint_check_in_place
Scope: SESSION | GLOBAL
Persists to cluster: Yes
Applies to hint SET_VAR: No
Type: Boolean
Default value:
OFF
This variable only applies to optimistic transactions. For pessimistic transactions, use
tidb_constraint_check_in_place_pessimistic
instead.When this variable is set to
OFF
, checking for duplicate values in unique indexes is deferred until the transaction commits. This helps improve performance but might be an unexpected behavior for some applications. See Constraints for details.When setting
tidb_constraint_check_in_place
toOFF
and using optimistic transactions:tidb> create table t (i int key); tidb> insert into t values (1); tidb> begin optimistic; tidb> insert into t values (1); Query OK, 1 row affected tidb> commit; -- Check only when a transaction is committed. ERROR 1062 : Duplicate entry '1' for key 't.PRIMARY'When setting
tidb_constraint_check_in_place
toON
and using optimistic transactions:tidb> set @@tidb_constraint_check_in_place=ON; tidb> begin optimistic; tidb> insert into t values (1); ERROR 1062 : Duplicate entry '1' for key 't.PRIMARY'
tidb_constraint_check_in_place_pessimistic New in v6.3.0
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value: By default, the
pessimistic-txn.constraint-check-in-place-pessimistic
configuration item istrue
so the default value of this variable isON
. Whenpessimistic-txn.constraint-check-in-place-pessimistic
is set tofalse
, the default value of this variable isOFF
.
- Default value:
ON
This variable only applies to pessimistic transactions. For optimistic transactions, use
tidb_constraint_check_in_place
instead.When this variable is set to
OFF
, TiDB defers the unique constraint check of a unique index (to the next time when executing a statement that requires a lock to the index or to the time when committing the transaction). This helps improve performance but might be an unexpected behavior for some applications. See Constraints for details.Disabling this variable might cause TiDB to return a
LazyUniquenessCheckFailure
error in pessimistic transactions. When this error occurs, TiDB rolls back the current transaction.When this variable is disabled, you cannot use
SAVEPOINT
in pessimistic transactions.When this variable is disabled, committing a pessimistic transaction might return a
Write conflict
orDuplicate entry
error. When such an error occurs, TiDB rolls back the current transaction.When setting
tidb_constraint_check_in_place_pessimistic
toOFF
and using pessimistic transactions:set @@tidb_constraint_check_in_place_pessimistic=OFF; create table t (i int key); insert into t values (1); begin pessimistic; insert into t values (1);Query OK, 1 row affectedtidb> commit; -- Check only when a transaction is committed.ERROR 1062 : Duplicate entry '1' for key 't.PRIMARY'When setting
tidb_constraint_check_in_place_pessimistic
toON
and using pessimistic transactions:set @@tidb_constraint_check_in_place_pessimistic=ON; begin pessimistic; insert into t values (1);ERROR 1062 : Duplicate entry '1' for key 't.PRIMARY'
tidb_cost_model_version New in v6.2.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
2
- Value options:
1
: enables the Cost Model Version 1, which is used by default in TiDB v6.4.0 and earlier versions.2
: enables the Cost Model Version 2, which is generally available in TiDB v6.5.0 and is more accurate than the version 1 in internal tests.
- The version of cost model affects the plan decision of optimizer. For more details, see Cost Model.
tidb_current_ts
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 9223372036854775807]
- This variable is read-only. It is used to obtain the timestamp of the current transaction.
tidb_ddl_disk_quota New in v6.3.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
107374182400
(100 GiB) - Range:
[107374182400, 1125899906842624]
([100 GiB, 1 PiB]) - Unit: Bytes
- This variable only takes effect when
tidb_ddl_enable_fast_reorg
is enabled. It sets the usage limit of local storage during backfilling when creating an index.
tidb_ddl_enable_fast_reorg New in v6.3.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether to enable the acceleration of
ADD INDEX
andCREATE INDEX
to improve the speed of backfilling for index creation. Setting this variable value toON
can bring performance improvement for index creation on tables with a large amount of data. - Starting from v7.1.0, the index acceleration operation supports checkpoints. Even if the TiDB owner node is restarted or changed due to failures, TiDB can still recover progress from checkpoints that are automatically updated on a regular basis.
- To verify whether a completed
ADD INDEX
operation is accelerated, you can execute theADMIN SHOW DDL JOBS
statement to see whetheringest
is displayed in theJOB_TYPE
column.
tidb_enable_dist_task New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
ON
- This variable is used to control whether to enable the TiDB Distributed eXecution Framework (DXF). After the framework is enabled, the DXF tasks such as DDL and import will be distributedly executed and completed by multiple TiDB nodes in the cluster.
- Starting from TiDB v7.1.0, the DXF supports distributedly executing the
ADD INDEX
statement for partitioned tables. - Starting from TiDB v7.2.0, the DXF supports distributedly executing the
IMPORT INTO
statement for import jobs. - Starting from TiDB v8.1.0, this variable is enabled by default. If you want to upgrade a cluster with the DXF enabled to v8.1.0 or later, disable the DXF (by setting
tidb_enable_dist_task
toOFF
) before the upgrade, which avoidsADD INDEX
operations during the upgrade causing data index inconsistency. After the upgrade, you can manually enable the DXF. - This variable is renamed from
tidb_ddl_distribute_reorg
.
tidb_cloud_storage_uri New in v7.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
""
- This variable is used to specify the Amazon S3 cloud storage URI to enable Global Sort. After enabling the TiDB Distributed eXecution Framework (DXF), you can use the Global Sort feature by configuring the URI and pointing it to an appropriate cloud storage path with the necessary permissions to access the storage. For more details, see Amazon S3 URI format.
- The following statements can use the Global Sort feature.
- The
ADD INDEX
statement. - The
IMPORT INTO
statement for import jobs.
- The
tidb_ddl_error_count_limit
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
512
- Range:
[0, 9223372036854775807]
- This variable is used to set the number of retries when the DDL operation fails. When the number of retries exceeds the parameter value, the wrong DDL operation is canceled.
tidb_ddl_flashback_concurrency New in v6.3.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
64
- Range:
[1, 256]
- This variable controls the concurrency of
FLASHBACK CLUSTER
.
tidb_ddl_reorg_batch_size
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
256
- Range:
[32, 10240]
- Unit: Rows
- This variable is used to set the batch size during the
re-organize
phase of the DDL operation. For example, when TiDB executes theADD INDEX
operation, the index data needs to backfilled bytidb_ddl_reorg_worker_cnt
(the number) concurrent workers. Each worker backfills the index data in batches.- If
tidb_ddl_enable_fast_reorg
is set toOFF
,ADD INDEX
is executed as a transaction. If there are many update operations such asUPDATE
andREPLACE
in the target columns during theADD INDEX
execution, a larger batch size indicates a larger probability of transaction conflicts. In this case, it is recommended that you set the batch size to a smaller value. The minimum value is 32. - If the transaction conflict does not exist, or if
tidb_ddl_enable_fast_reorg
is set toON
, you can set the batch size to a large value. This makes data backfilling faster but also increases the write pressure on TiKV. For a proper batch size, you also need to refer to the value oftidb_ddl_reorg_worker_cnt
. See Interaction Test on Online Workloads andADD INDEX
Operations for reference.
- If
tidb_ddl_reorg_priority
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
PRIORITY_LOW
- Value options:
PRIORITY_LOW
,PRIORITY_NORMAL
,PRIORITY_HIGH
- This variable is used to set the priority of executing the
ADD INDEX
operation in there-organize
phase. - You can set the value of this variable to
PRIORITY_LOW
,PRIORITY_NORMAL
orPRIORITY_HIGH
.
tidb_ddl_reorg_worker_cnt
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
4
- Range:
[1, 256]
- Unit: Threads
- This variable is used to set the concurrency of the DDL operation in the
re-organize
phase.
tidb_enable_fast_create_table
New in v8.0.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether to enable TiDB Accelerated Table Creation.
- Starting from v8.0.0, TiDB supports accelerating table creation by the
CREATE TABLE
statement usingtidb_enable_fast_create_table
. - This variable is renamed from the variable
tidb_ddl_version
that is introduced in v7.6.0. Starting from v8.0.0,tidb_ddl_version
no longer takes effect.
tidb_default_string_match_selectivity New in v6.2.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Default value:
0.8
- Range:
[0, 1]
- This variable is used to set the default selectivity of
like
,rlike
, andregexp
functions in the filter condition when estimating the number of rows. This variable also controls whether to enable TopN to help estimate these functions. - TiDB tries to estimate
like
in the filter condition using statistics. But whenlike
matches a complex string, or when usingrlike
orregexp
, TiDB often fails to fully use statistics, and the default value0.8
is set as the selectivity rate instead, resulting in inaccurate estimation. - This variable is used to change the preceding behavior. If the variable is set to a value other than
0
, the selectivity rate is the specified variable value instead of0.8
. - If the variable is set to
0
, TiDB tries to evaluate using TopN in statistics to improve the accuracy and consider the NULL number in statistics when estimating the preceding three functions. The prerequisite is that statistics are collected whentidb_analyze_version
is set to2
. Such evaluation might slightly affect the performance. - If the variable is set to a value other than the
0.8
, TiDB adjusts the estimation fornot like
,not rlike
, andnot regexp
accordingly.
tidb_disable_txn_auto_retry
Scope: SESSION | GLOBAL
Persists to cluster: Yes
Applies to hint SET_VAR: No
Type: Boolean
Default value:
ON
This variable is used to set whether to disable the automatic retry of explicit optimistic transactions. The default value of
ON
means that transactions will not automatically retry in TiDB andCOMMIT
statements might return errors that need to be handled in the application layer.Setting the value to
OFF
means that TiDB will automatically retry transactions, resulting in fewer errors fromCOMMIT
statements. Be careful when making this change, because it might result in lost updates.This variable does not affect automatically committed implicit transactions and internally executed transactions in TiDB. The maximum retry count of these transactions is determined by the value of
tidb_retry_limit
.For more details, see limits of retry.
This variable only applies to optimistic transactions, not to pessimistic transactions. The number of retries for pessimistic transactions is controlled by
max_retry_count
.This variable only applies to optimistic transactions, not to pessimistic transactions. The number of retries for pessimistic transactions is 256.
tidb_distsql_scan_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
15
- Range:
[1, 256]
- Unit: Threads
- This variable is used to set the concurrency of the
scan
operation. - Use a bigger value in OLAP scenarios, and a smaller value in OLTP scenarios.
- For OLAP scenarios, the maximum value should not exceed the number of CPU cores of all the TiKV nodes.
- If a table has a lot of partitions, you can reduce the variable value appropriately (determined by the size of the data to be scanned and the frequency of the scan) to avoid TiKV becoming out of memory (OOM).
- For a simple query with only a
LIMIT
clause, if theLIMIT
value is less than 100000, the scan operation pushed down to TiKV treats the value of this variable as1
to enhance execution efficiency. - For the
SELECT MAX/MIN(col) FROM ...
query, if thecol
column has an index sorted in the same order required by theMAX(col)
orMIN(col)
function, TiDB will rewrite the query toSELECT col FROM ... LIMIT 1
for processing, and the value of this variable will also be processed as1
. For example, forSELECT MIN(col) FROM ...
, if thecol
column has an ascending index, TiDB can quickly obtain theMIN(col)
value by rewriting the query toSELECT col FROM ... LIMIT 1
and directly reading the first row of the index.
tidb_dml_batch_size
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 2147483647]
- Unit: Rows
- When this value is greater than
0
, TiDB will batch commit statements such asINSERT
into smaller transactions. This reduces memory usage and helps ensure that thetxn-total-size-limit
is not reached by bulk modifications. - Only the value
0
provides ACID compliance. Setting this to any other value will break the atomicity and isolation guarantees of TiDB. - To make this variable work, you also need to enable
tidb_enable_batch_dml
and at least one oftidb_batch_insert
andtidb_batch_delete
.
tidb_dml_type New in v8.0.0
- Scope: SESSION
- Applies to hint SET_VAR: Yes
- Type: String
- Default value:
"standard"
- Value options:
"standard"
,"bulk"
- This variable controls the execution mode of DML statements.
"standard"
indicates the standard DML execution mode, where TiDB transactions are cached in memory before being committed. This mode is suitable for high-concurrency transaction scenarios with potential conflicts and is the default recommended execution mode."bulk"
indicates the bulk DML execution mode, which is suitable for scenarios where a large amount of data is written, causing excessive memory usage in TiDB.- During the execution of TiDB transactions, the data is not fully cached in the TiDB memory, but is continuously written to TiKV to reduce memory usage and smooth the write pressure.
- Only
INSERT
,UPDATE
,REPLACE
, andDELETE
statements are affected by the"bulk"
mode. Due to the pipelined execution in"bulk"
mode, the usage ofINSERT IGNORE ... ON DUPLICATE UPDATE ...
might result in aDuplicate entry
error when updates cause conflicts. In contrast, in"standard"
mode, because theIGNORE
keyword is set, this error would be ignored and not be returned to the user. "bulk"
mode is only suitable for scenarios where a large amount of data is written without conflicts. This mode is not efficient for handling write conflicts, as write-write conflicts might cause large transactions to fail and be rolled back."bulk"
mode only takes effect on statements with auto-commit enabled, and requires thepessimistic-auto-commit
configuration item to be set tofalse
.- When using the
"bulk"
mode to execute statements, ensure that the metadata lock remains enabled during the execution process. "bulk"
mode cannot be used on temporary tables and cached tables."bulk"
mode cannot be used on tables containing foreign keys and tables referenced by foreign keys when the foreign key constraint check is enabled (foreign_key_checks = ON
).- In situations that the environment does not support or is incompatible with the
"bulk"
mode, TiDB falls back to the"standard"
mode and returns a warning message. To verify if the"bulk"
mode is used, you can check thepipelined
field usingtidb_last_txn_info
. Atrue
value indicates that the"bulk"
mode is used. - When executing large transactions in the
"bulk"
mode, the transaction duration might be long. For transactions in this mode, the maximum TTL of the transaction lock is the greater value betweenmax-txn-ttl
and 24 hours. Additionally, if the transaction execution time exceeds the value set bytidb_gc_max_wait_time
, the GC might force a rollback of the transaction, leading to its failure. - When TiDB executes transactions in the
"bulk"
mode, transaction size is not limited by the TiDB configuration itemtxn-total-size-limit
. - This mode is implemented by the Pipelined DML feature. For detailed design and GitHub issues, see Pipelined DML and #50215.
tidb_enable_1pc New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to specify whether to enable the one-phase commit feature for transactions that only affect one Region. Compared with the often-used two-phase commit, one-phase commit can greatly reduce the latency of transaction commit and increase the throughput.
tidb_enable_analyze_snapshot New in v6.2.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to read historical data or the latest data when performing
ANALYZE
. If this variable is set toON
,ANALYZE
reads the historical data available at the time ofANALYZE
. If this variable is set toOFF
,ANALYZE
reads the latest data. - Before v5.2,
ANALYZE
reads the latest data. From v5.2 to v6.1,ANALYZE
reads the historical data available at the time ofANALYZE
.
tidb_enable_async_commit New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether to enable the async commit feature for the second phase of the two-phase transaction commit to perform asynchronously in the background. Enabling this feature can reduce the latency of transaction commit.
tidb_enable_auto_analyze New in v6.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- Determines whether TiDB automatically updates table statistics as a background operation.
- This setting was previously a
tidb.toml
option (performance.run-auto-analyze
), but changed to a system variable starting from TiDB v6.1.0.
tidb_enable_auto_analyze_priority_queue New in v8.0.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to enable the priority queue to schedule the tasks of automatically collecting statistics. When this variable is enabled, TiDB prioritizes collecting statistics for tables that are more valuable to collect, such as newly created indexes and partitioned tables with partition changes. Additionally, TiDB prioritizes tables with lower health scores, placing them at the front of the queue.
tidb_enable_auto_increment_in_generated
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to determine whether to include the
AUTO_INCREMENT
columns when creating a generated column or an expression index.
tidb_enable_batch_dml
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enable the deprecated batch-dml feature. When it is enabled, certain statements might be split into multiple transactions, which is non-atomic and should be used with care. When using batch-dml, you must ensure that there are no concurrent operations on the data you are operating on. To make it work, you must also specify a positive value for
tidb_batch_dml_size
and enable at least one oftidb_batch_insert
andtidb_batch_delete
.
tidb_enable_cascades_planner
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether to enable the cascades planner.
tidb_enable_check_constraint New in v7.2.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether to enable the
CHECK
constraint feature.
tidb_enable_chunk_rpc New in v4.0
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to enable the
Chunk
data encoding format in Coprocessor.
tidb_enable_clustered_index New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
ON
- Possible values:
OFF
,ON
,INT_ONLY
- This variable is used to control whether to create the primary key as a clustered index by default. "By default" here means that the statement does not explicitly specify the keyword
CLUSTERED
/NONCLUSTERED
. Supported values areOFF
,ON
, andINT_ONLY
:OFF
indicates that primary keys are created as non-clustered indexes by default.ON
indicates that primary keys are created as clustered indexes by default.INT_ONLY
indicates that the behavior is controlled by the configuration itemalter-primary-key
. Ifalter-primary-key
is set totrue
, all primary keys are created as non-clustered indexes by default. If it is set tofalse
, only the primary keys which consist of an integer column are created as clustered indexes.
tidb_enable_ddl New in v6.3.0
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Default value:
ON
- Possible values:
OFF
,ON
- This variable controls whether the corresponding TiDB instance can become a DDL owner or not. If there is only one TiDB instance in the current TiDB cluster, you cannot prevent it from becoming a DDL owner, which means you cannot set it to
OFF
.
tidb_enable_collect_execution_info
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether to record the execution information of each operator in the slow query log and whether to record the usage statistics of indexes.
tidb_enable_column_tracking New in v5.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enable TiDB to collect
PREDICATE COLUMNS
. After enabling the collection, if you disable it, the information of previously collectedPREDICATE COLUMNS
is cleared. For details, see Collect statistics on some columns.
tidb_enable_enhanced_security
- Scope: NONE
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable indicates whether the TiDB server you are connected to has the Security Enhanced Mode (SEM) enabled. To change its value, you need to modify the value of
enable-sem
in your TiDB server configuration file and restart the TiDB server.
- Default value:
ON
- This variable is read-only. For TiDB Cloud, the Security Enhanced Mode (SEM) is enabled by default.
- SEM is inspired by the design of systems such as Security-Enhanced Linux. It reduces the abilities of users with the MySQL
SUPER
privilege and instead requiresRESTRICTED
fine-grained privileges to be granted as a replacement. These fine-grained privileges include:RESTRICTED_TABLES_ADMIN
: The ability to write data to system tables in themysql
schema and to see sensitive columns oninformation_schema
tables.RESTRICTED_STATUS_ADMIN
: The ability to see sensitive variables in the commandSHOW STATUS
.RESTRICTED_VARIABLES_ADMIN
: The ability to see and set sensitive variables inSHOW [GLOBAL] VARIABLES
andSET
.RESTRICTED_USER_ADMIN
: The ability to prevent other users from making changes or dropping a user account.
tidb_enable_exchange_partition
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether to enable the
exchange partitions with tables
feature. The default value isON
, that is,exchange partitions with tables
is enabled by default. - This variable is deprecated since v6.3.0. Its value will be fixed to the default value
ON
, that is,exchange partitions with tables
is enabled by default.
tidb_enable_extended_stats
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable indicates whether TiDB can collect the extended statistic to guide the optimizer. See Introduction to Extended Statistics for more information.
tidb_enable_external_ts_read New in v6.4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- If this variable is set to
ON
, TiDB reads data with the timestamp specified bytidb_external_ts
.
tidb_external_ts New in v6.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- If
tidb_enable_external_ts_read
is set toON
, TiDB reads data with the timestamp specified by this variable.
tidb_enable_fast_analyze
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to set whether to enable the statistics
Fast Analyze
feature. - If the statistics
Fast Analyze
feature is enabled, TiDB randomly samples about 10,000 rows of data as statistics. When the data is distributed unevenly or the data size is small, the statistics accuracy is low. This might lead to a non-optimal execution plan, for example, selecting a wrong index. If the execution time of the regularAnalyze
statement is acceptable, it is recommended to disable theFast Analyze
feature.
tidb_enable_fast_table_check New in v7.2.0
- Scope: SESSION | GLOBAL
- Persists to the cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to use a checksum-based approach to quickly check the integrity of data and indexes in a table. The default value
ON
means this feature is enabled by default. - When this variable is enabled, TiDB can execute the
ADMIN CHECK [TABLE|INDEX]
statement in a faster way.
tidb_enable_foreign_key New in v6.3.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value: Before v6.6.0, the default value is
OFF
. Starting from v6.6.0, the default value isON
. - This variable controls whether to enable the
FOREIGN KEY
feature.
tidb_enable_gc_aware_memory_track
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enable GC-Aware memory track.
tidb_enable_global_index New in v7.6.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- Possible values:
OFF
,ON
- This variable controls whether to support creating
Global indexes
for partitioned tables.Global index
is currently in the development stage. It is not recommended to modify the value of this system variable.
tidb_enable_non_prepared_plan_cache
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enable the Non-prepared plan cache feature.
- Enabling this feature might incur additional memory and CPU overhead and might not be suitable for all situations. Please determine whether to enable this feature according to your actual scenario.
tidb_enable_non_prepared_plan_cache_for_dml New in v7.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
. - This variable controls whether to enable the Non-prepared plan cache feature for DML statements.
tidb_enable_gogc_tuner New in v6.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether to enable GOGC Tuner.
tidb_enable_historical_stats
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
. Before v8.2.0, the default value isON
. - This variable controls whether to enable historical statistics. The default value is
OFF
, which means that historical statistics are disabled by default.
tidb_enable_historical_stats_for_capture
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether the information captured by
PLAN REPLAYER CAPTURE
includes historical statistics by default. The default valueOFF
means that historical statistics are not included by default.
tidb_enable_index_merge New in v4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to enable the index merge feature.
tidb_enable_index_merge_join
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- Specifies whether to enable the
IndexMergeJoin
operator. - This variable is used only for the internal operation of TiDB. It is NOT recommended to adjust it. Otherwise, data correctness might be affected.
tidb_enable_legacy_instance_scope New in v6.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable permits
INSTANCE
scoped variables to be set using theSET SESSION
as well asSET GLOBAL
syntax. - This option is enabled by default for compatibility with earlier versions of TiDB.
tidb_enable_list_partition New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to set whether to enable the
LIST (COLUMNS) TABLE PARTITION
feature.
tidb_enable_local_txn
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used for an unreleased feature. Do not change the variable value.
tidb_enable_metadata_lock New in v6.3.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to set whether to enable the Metadata lock feature. Note that when setting this variable, you need to make sure that there are no running DDL statements in the cluster. Otherwise, the data might be incorrect or inconsistent.
tidb_enable_mutation_checker New in v6.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to enable TiDB mutation checker, which is a tool used to check consistency between data and indexes during the execution of DML statements. If the checker returns an error for a statement, TiDB rolls back the execution of the statement. Enabling this variable causes a slight increase in CPU usage. For more information, see Troubleshoot Inconsistency Between Data and Indexes.
- For new clusters of v6.0.0 or later versions, the default value is
ON
. For existing clusters that upgrade from versions earlier than v6.0.0, the default value isOFF
.
tidb_enable_new_cost_interface New in v6.2.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- TiDB v6.2.0 refactors the implementation of previous cost model. This variable controls whether to enable the refactored Cost Model implementation.
- This variable is enabled by default because the refactored Cost Model uses the same cost formula as before, which does not change the plan decision.
- If your cluster is upgraded from v6.1 to v6.2, this variable remains
OFF
, and it is recommended to enable it manually. If your cluster is upgraded from a version earlier than v6.1, this variable sets toON
by default.
tidb_enable_new_only_full_group_by_check New in v6.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable controls the behavior when TiDB performs the
ONLY_FULL_GROUP_BY
check. For detailed information aboutONLY_FULL_GROUP_BY
, see the MySQL documentation. In v6.1.0, TiDB handles this check more strictly and correctly. - To avoid potential compatibility issues caused by version upgrades, the default value of this variable is
OFF
in v6.1.0.
tidb_enable_noop_functions New in v4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
OFF
- Possible values:
OFF
,ON
,WARN
- By default, TiDB returns an error when you attempt to use the syntax for functionality that is not yet implemented. When the variable value is set to
ON
, TiDB silently ignores such cases of unavailable functionality, which is helpful if you cannot make changes to the SQL code. - Enabling
noop
functions controls the following behaviors:LOCK IN SHARE MODE
syntaxSQL_CALC_FOUND_ROWS
syntaxSTART TRANSACTION READ ONLY
andSET TRANSACTION READ ONLY
syntax- The
tx_read_only
,transaction_read_only
,offline_mode
,super_read_only
,read_only
andsql_auto_is_null
system variables GROUP BY <expr> ASC|DESC
syntax
tidb_enable_noop_variables New in v6.2.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
ON
- If you set the variable value to
OFF
, TiDB behaves as follows:- When you use
SET
to set anoop
variable, TiDB returns the"setting *variable_name* has no effect in TiDB"
warning. - The result of
SHOW [SESSION | GLOBAL] VARIABLES
does not includenoop
variables. - When you use
SELECT
to read anoop
variable, TiDB returns the"variable *variable_name* has no effect in TiDB"
warning.
- When you use
- To check whether a TiDB instance has set and read the
noop
variable, you can use theSELECT * FROM INFORMATION_SCHEMA.CLIENT_ERRORS_SUMMARY_GLOBAL;
statement.
tidb_enable_null_aware_anti_join New in v6.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Default value: Before v7.0.0, the default value is
OFF
. Starting from v7.0.0, the default value isON
. - Type: Boolean
- This variable controls whether TiDB applies Null Aware Hash Join when ANTI JOIN is generated by subqueries led by special set operators
NOT IN
and!= ALL
. - When you upgrade from an earlier version to a v7.0.0 or later cluster, the feature is automatically enabled, meaning that this variable is set to
ON
.
tidb_enable_outer_join_reorder New in v6.1.0
Scope: SESSION | GLOBAL
Persists to cluster: Yes
Applies to hint SET_VAR: Yes
Type: Boolean
Default value:
ON
Since v6.1.0, the Join Reorder algorithm of TiDB supports Outer Join. This variable controls whether TiDB enables the Join Reorder's support for Outer Join.
If your cluster is upgraded from an earlier version of TiDB, note the following:
- If the TiDB version before the upgrade is earlier than v6.1.0, the default value of this variable after the upgrade is
ON
. - If the TiDB version before the upgrade is v6.1.0 or later, the default value of the variable after the upgrade follows the value before the upgrade.
- If the TiDB version before the upgrade is earlier than v6.1.0, the default value of this variable after the upgrade is
tidb_enable_inl_join_inner_multi_pattern
New in v7.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable controls whether Index Join is supported when the inner table has
Selection
orProjection
operators on it. The default valueOFF
means that Index Join is not supported in this scenario.
tidb_enable_ordered_result_mode
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- Specifies whether to sort the final output result automatically.
- For example, with this variable enabled, TiDB processes
SELECT a, MAX(b) FROM t GROUP BY a
asSELECT a, MAX(b) FROM t GROUP BY a ORDER BY a, MAX(b)
.
tidb_enable_paging New in v5.4.0
Scope: SESSION | GLOBAL
Persists to cluster: Yes
Applies to hint SET_VAR: Yes
Type: Boolean
Default value:
ON
This variable controls whether to use the method of paging to send coprocessor requests. For TiDB versions in [v5.4.0, v6.2.0), this variable only takes effect on the
IndexLookup
operator; for v6.2.0 and later, this variable takes effect globally. Starting from v6.4.0, the default value of this variable is changed fromOFF
toON
.User scenarios:
- In all OLTP scenarios, it is recommended to use the method of paging.
- For read queries that use
IndexLookup
andLimit
and thatLimit
cannot be pushed down toIndexScan
, there might be high latency for the read queries and high usage for TiKVUnified read pool CPU
. In such cases, because theLimit
operator only requires a small set of data, if you settidb_enable_paging
toON
, TiDB processes less data, which reduces query latency and resource consumption. - In scenarios such as data export using Dumpling and full table scan, enabling paging can effectively reduce the memory consumption of TiDB processes.
tidb_enable_parallel_apply New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enable concurrency for the
Apply
operator. The number of concurrencies is controlled by thetidb_executor_concurrency
variable. TheApply
operator processes correlated subqueries and has no concurrency by default, so the execution speed is slow. Setting this variable value to1
can increase concurrency and speed up execution. Currently, concurrency forApply
is disabled by default.
tidb_enable_parallel_hashagg_spill New in v8.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether TiDB supports disk spill for the parallel HashAgg algorithm. When it is
ON
, the HashAgg operator can automatically trigger data spill based on memory usage under any parallel conditions, thus balancing performance and data throughput. It is not recommended to set this variable toOFF
. Starting from v8.2.0, setting it toOFF
will report an error. This variable will be deprecated in a future release.
tidb_enable_pipelined_window_function
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable specifies whether to use the pipeline execution algorithm for window functions.
tidb_enable_plan_cache_for_param_limit New in v6.6.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether Prepared Plan Cache caches execution plans with a variable as the
LIMIT
parameter (LIMIT ?
). The default value isON
, which means Prepared Plan Cache supports caching such execution plans. Note that Prepared Plan Cache does not support caching execution plans with a variable that is greater than 10000.
tidb_enable_plan_cache_for_subquery New in v7.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether Prepared Plan Cache caches queries that contain subqueries.
tidb_enable_plan_replayer_capture
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enable the
PLAN REPLAYER CAPTURE
feature. The default valueOFF
means to disable thePLAN REPLAYER CAPTURE
feature.
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether to enable the
PLAN REPLAYER CAPTURE
feature. The default valueON
means to enable thePLAN REPLAYER CAPTURE
feature.
tidb_enable_plan_replayer_continuous_capture New in v7.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enable the
PLAN REPLAYER CONTINUOUS CAPTURE
feature. The default valueOFF
means to disable the feature.
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enable the
PLAN REPLAYER CONTINUOUS CAPTURE
feature. The default valueOFF
means to disable the feature.
tidb_enable_prepared_plan_cache New in v6.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
ON
- Determines whether to enable Prepared Plan Cache. When it is enabled, the execution plans of
Prepare
andExecute
are cached so that the subsequent executions skip optimizing the execution plans, which brings performance improvement. - This setting was previously a
tidb.toml
option (prepared-plan-cache.enabled
), but changed to a system variable starting from TiDB v6.1.0.
tidb_enable_prepared_plan_cache_memory_monitor New in v6.4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
ON
- This variable controls whether to count the memory consumed by the execution plans cached in the Prepared Plan Cache. For details, see Memory management of Prepared Plan Cache.
tidb_enable_pseudo_for_outdated_stats New in v5.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable controls the behavior of the optimizer on using statistics of a table when the statistics are outdated.
- The optimizer determines whether the statistics of a table is outdated in this way: since the last time
ANALYZE
is executed on a table to get the statistics, if 80% of the table rows are modified (the modified row count divided by the total row count), the optimizer determines that the statistics of this table is outdated. You can change this ratio using thepseudo-estimate-ratio
configuration.
- The optimizer determines whether the statistics of a table is outdated in this way: since the last time
ANALYZE
is executed on a table to get the statistics, if 80% of the table rows are modified (the modified row count divided by the total row count), the optimizer determines that the statistics of this table is outdated.
- By default (with the variable value
OFF
), when the statistics of a table is outdated, the optimizer still keeps using the statistics of the table. If you set the variable value toON
, the optimizer determines that the statistics of the table is no longer reliable except for the total row count. Then, the optimizer uses the pseudo statistics. - If the data on a table is frequently modified without executing
ANALYZE
on this table in time, to keep the execution plan stable, it is recommended to set the variable value toOFF
.
tidb_enable_rate_limit_action
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enable the dynamic memory control feature for the operator that reads data. By default, this operator enables the maximum number of threads that
tidb_distsql_scan_concurrency
allows to read data. When the memory usage of a single SQL statement exceedstidb_mem_quota_query
each time, the operator that reads data stops one thread.
- When the operator that reads data has only one thread left and the memory usage of a single SQL statement constantly exceeds
tidb_mem_quota_query
, this SQL statement triggers other memory control behaviors, such as spilling data to disk. - This variable controls memory usage effectively when an SQL statement only reads data. If computing operations (such as join or aggregation operations) are required, memory usage might not be under the control of
tidb_mem_quota_query
, which increases the risk of OOM.
- When the operator that reads data has only one thread left and the memory usage of a single SQL statement continues to exceed
tidb_mem_quota_query
, this SQL statement triggers other memory control behaviors, such as spilling data to disk.
tidb_enable_resource_control New in v6.6.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
ON
- Type: Boolean
- This variable is a switch for the resource control feature. When this variable is set to
ON
, the TiDB cluster can isolate application resources based on resource groups.
tidb_enable_reuse_chunk New in v6.4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
ON
- Value options:
OFF
,ON
- This variable controls whether TiDB enables chunk objects cache. If the value is
ON
, TiDB prefers to use the cached chunk object and only requests from the system if the requested object is not in the cache. If the value isOFF
, TiDB requests chunk objects from the system directly.
tidb_enable_slow_log
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to enable the slow log feature.
tidb_enable_tmp_storage_on_oom
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
ON
- Value options:
OFF
,ON
- Controls whether to enable the temporary storage for some operators when a single SQL statement exceeds the memory quota specified by the system variable
tidb_mem_quota_query
. - Before v6.3.0, you can enable or disable this feature by using the TiDB configuration item
oom-use-tmp-storage
. After upgrading the cluster to v6.3.0 or a later version, the TiDB cluster will initialize this variable using the value ofoom-use-tmp-storage
automatically. After that, changing the value ofoom-use-tmp-storage
does not take effect anymore.
tidb_enable_stmt_summary New in v3.0.4
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to enable the statement summary feature. If enabled, SQL execution information like time consumption is recorded to the
information_schema.STATEMENTS_SUMMARY
system table to identify and troubleshoot SQL performance issues.
tidb_enable_strict_double_type_check New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to control if tables can be created with invalid definitions of type
DOUBLE
. This setting is intended to provide an upgrade path from earlier versions of TiDB, which were less strict in validating types. - The default value of
ON
is compatible with MySQL.
For example, the type DOUBLE(10)
is now considered invalid because the precision of floating point types is not guaranteed. After changing tidb_enable_strict_double_type_check
to OFF
, the table is created:
mysql> CREATE TABLE t1 (id int, c double(10));
ERROR 1149 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use
mysql> SET tidb_enable_strict_double_type_check = 'OFF';
Query OK, 0 rows affected (0.00 sec)
mysql> CREATE TABLE t1 (id int, c double(10));
Query OK, 0 rows affected (0.09 sec)
tidb_enable_table_partition
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
ON
- Possible values:
OFF
,ON
,AUTO
- This variable is used to set whether to enable the
TABLE PARTITION
feature:ON
indicates enabling Range partitioning, Hash partitioning, and Range column partitioning with one single column.AUTO
functions the same way asON
does.OFF
indicates disabling theTABLE PARTITION
feature. In this case, the syntax that creates a partition table can be executed, but the table created is not a partitioned one.
tidb_enable_telemetry New in v4.0.2
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to dynamically control whether the telemetry collection in TiDB is enabled. In the current version, the telemetry is disabled by default. If the
enable-telemetry
TiDB configuration item is set tofalse
on all TiDB instances, the telemetry collection is always disabled and this system variable will not take effect. See Telemetry for details.
- This variable is used to dynamically control whether the telemetry collection in TiDB is enabled.
tidb_enable_tiflash_read_for_write_stmt New in v6.3.0
Scope: SESSION | GLOBAL
Persists to cluster: Yes
Applies to hint SET_VAR: No
Type: Boolean
Default value:
ON
This variable controls whether read operations in SQL statements containing
INSERT
,DELETE
, andUPDATE
can be pushed down to TiFlash. For example:SELECT
queries inINSERT INTO SELECT
statements (typical usage scenario: TiFlash query result materialization)WHERE
condition filtering inUPDATE
andDELETE
statements
Starting from v7.1.0, this variable is deprecated. When
tidb_allow_mpp = ON
, the optimizer intelligently decides whether to push a query down to TiFlash based on the SQL mode and the cost estimates of the TiFlash replica. Note that TiDB allows read operations in SQL statements containingINSERT
,DELETE
, andUPDATE
(such asINSERT INTO SELECT
) to be pushed down to TiFlash only when the SQL Mode of the current session is not strict, which means that thesql_mode
value does not containSTRICT_TRANS_TABLES
andSTRICT_ALL_TABLES
.
tidb_enable_top_sql New in v5.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether to enable the Top SQL feature.
- This variable is used to control whether to enable the Top SQL feature.
tidb_enable_tso_follower_proxy New in v5.3.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enable the TSO Follower Proxy feature. When the value is
OFF
, TiDB only gets TSO from the PD leader. When the value isON
, TiDB evenly distributes requests for TSO to all PD servers, and PD followers can also handle TSO requests, thereby reducing the CPU pressure on the PD leader. - Scenarios for enabling TSO Follower Proxy:
- Due to the high pressure of TSO requests, the CPU of the PD leader reaches a bottleneck, which causes high latency of TSO RPC requests.
- The TiDB cluster has many TiDB instances, and increasing the value of
tidb_tso_client_batch_max_wait_time
cannot alleviate the high latency issue of TSO RPC requests.
tidb_enable_unsafe_substitute New in v6.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable controls whether to replace expressions with generated columns in an unsafe way. The default value is
OFF
, which means that unsafe replacement is disabled by default. For more details, see Generated Columns.
tidb_enable_vectorized_expression New in v4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to enable vectorized execution.
tidb_enable_window_function
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to enable the support for window functions. Note that window functions might use reserved keywords. This might cause SQL statements that can be executed normally to fail to be parsed after TiDB is upgraded. In this case, you can set
tidb_enable_window_function
toOFF
.
tidb_enable_row_level_checksum
New in v7.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether to enable the TiCDC data integrity validation for single-row data feature.
- This variable is used to control whether to enable the TiCDC data integrity validation for single-row data feature.
- You can use the
TIDB_ROW_CHECKSUM()
function to get the checksum value of a row.
tidb_enforce_mpp New in v5.1
- Scope: SESSION
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- To change this default value, modify the
performance.enforce-mpp
configuration value.
- Controls whether to ignore the optimizer's cost estimation and to forcibly use TiFlash's MPP mode for query execution. The value options are as follows:
0
orOFF
, which means that the MPP mode is not forcibly used (by default).1
orON
, which means that the cost estimation is ignored and the MPP mode is forcibly used. Note that this setting only takes effect whentidb_allow_mpp=true
.
MPP is a distributed computing framework provided by the TiFlash engine, which allows data exchange between nodes and provides high-performance, high-throughput SQL algorithms. For details about the selection of the MPP mode, refer to Control whether to select the MPP mode.
tidb_evolve_plan_baselines New in v4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether to enable the baseline evolution feature. For detailed introduction or usage , see Baseline Evolution.
- To reduce the impact of baseline evolution on the cluster, use the following configurations:
- Set
tidb_evolve_plan_task_max_time
to limit the maximum execution time of each execution plan. The default value is 600s. - Set
tidb_evolve_plan_task_start_time
andtidb_evolve_plan_task_end_time
to limit the time window. The default values are respectively00:00 +0000
and23:59 +0000
.
- Set
tidb_evolve_plan_task_end_time New in v4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Time
- Default value:
23:59 +0000
- This variable is used to set the end time of baseline evolution in a day.
tidb_evolve_plan_task_max_time New in v4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
600
- Range:
[-1, 9223372036854775807]
- Unit: Seconds
- This variable is used to limit the maximum execution time of each execution plan in the baseline evolution feature.
tidb_evolve_plan_task_start_time New in v4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Time
- Default value:
00:00 +0000
- This variable is used to set the start time of baseline evolution in a day.
tidb_executor_concurrency New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
5
- Range:
[1, 256]
- Unit: Threads
This variable is used to set the concurrency of the following SQL operators (to one value):
index lookup
index lookup join
hash join
hash aggregation
(thepartial
andfinal
phases)window
projection
sort
tidb_executor_concurrency
incorporates the following existing system variables as a whole for easier management:
tidb_index_lookup_concurrency
tidb_index_lookup_join_concurrency
tidb_hash_join_concurrency
tidb_hashagg_partial_concurrency
tidb_hashagg_final_concurrency
tidb_projection_concurrency
tidb_window_concurrency
Since v5.0, you can still separately modify the system variables listed above (with a deprecation warning returned) and your modification only affects the corresponding single operators. After that, if you use tidb_executor_concurrency
to modify the operator concurrency, the separately modified operators will not be affected. If you want to use tidb_executor_concurrency
to modify the concurrency of all operators, you can set the values of all variables listed above to -1
.
For a system upgraded to v5.0 from an earlier version, if you have not modified any value of the variables listed above (which means that the tidb_hash_join_concurrency
value is 5
and the values of the rest are 4
), the operator concurrency previously managed by these variables will automatically be managed by tidb_executor_concurrency
. If you have modified any of these variables, the concurrency of the corresponding operators will still be controlled by the modified variables.
tidb_expensive_query_time_threshold
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
60
- Range:
[10, 2147483647]
- Unit: Seconds
- This variable is used to set the threshold value that determines whether to print expensive query logs. The difference between expensive query logs and slow query logs is:
- Slow logs are printed after the statement is executed.
- Expensive query logs print the statements that are being executed, with execution time exceeding the threshold value, and their related information.
tidb_expensive_txn_time_threshold New in v7.2.0
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
600
- Range:
[60, 2147483647]
- Unit: Seconds
- This variable controls the threshold for logging expensive transactions, which is 600 seconds by default. When the duration of a transaction exceeds the threshold, and the transaction is neither committed nor rolled back, it is considered an expensive transaction and will be logged.
tidb_force_priority
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
NO_PRIORITY
- Possible values:
NO_PRIORITY
,LOW_PRIORITY
,HIGH_PRIORITY
,DELAYED
- This variable is used to change the default priority for statements executed on a TiDB server. A use case is to ensure that a particular user that is performing OLAP queries receives lower priority than users performing OLTP queries.
- The default value
NO_PRIORITY
means that the priority for statements is not forced to change.
tidb_gc_concurrency New in v5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
-1
- Range:
[1, 256]
- Unit: Threads
- Specifies the number of threads in the Resolve Locks step of GC. A value of
-1
means that TiDB will automatically decide the number of garbage collection threads to use.
tidb_gc_enable New in v5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- Enables garbage collection for TiKV. Disabling garbage collection will reduce system performance, as old versions of rows will no longer be purged.
tidb_gc_life_time New in v5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Duration
- Default value:
10m0s
- Range:
[10m0s, 8760h0m0s]
- The time limit during which data is retained for each GC, in the format of Go Duration. When a GC happens, the current time minus this value is the safe point.
tidb_gc_max_wait_time New in v6.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
86400
- Range:
[600, 31536000]
- Unit: Seconds
- This variable is used to set the maximum time that active transactions block the GC safe point. During each time of GC, the safe point does not exceed the start time of the ongoing transactions by default. If the runtime of active transactions does not exceed this variable value, the GC safe point will be blocked until the runtime exceeds this value.
tidb_gc_run_interval New in v5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Duration
- Default value:
10m0s
- Range:
[10m0s, 8760h0m0s]
- Specifies the GC interval, in the format of Go Duration, for example,
"1h30m"
, and"15m"
tidb_gc_scan_lock_mode New in v5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
LEGACY
- Possible values:
PHYSICAL
,LEGACY
LEGACY
: Uses the old way of scanning, that is, disable Green GC.PHYSICAL
: Uses the physical scanning method, that is, enable Green GC.
- This variable specifies the way of scanning locks in the Resolve Locks step of GC. When the variable value is set to
LEGACY
, TiDB scans locks by Regions. When the valuePHYSICAL
is used, it enables each TiKV node to bypass the Raft layer and directly scan data, which can effectively mitigate the impact of GC wakening up all Regions when the Hibernate Region feature is enabled, thus improving the execution speed in the Resolve Locks step.
- This variable specifies the way of scanning locks in the Resolve Locks step of GC. When the variable value is set to
LEGACY
, TiDB scans locks by Regions. When the valuePHYSICAL
is used, it enables each TiKV node to bypass the Raft layer and directly scan data, which can effectively mitigate the impact of GC wakening up all Regions, thus improving the execution speed in the Resolve Locks step.
tidb_general_log
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to set whether to record all SQL statements in the log. This feature is disabled by default. If you need to trace all SQL statements when locating issues, enable this feature.
This variable is used to set whether to record all SQL statements in the log. This feature is disabled by default. If maintenance personnel needs to trace all SQL statements when locating issues, they can enable this feature.
To see all records of this feature in the log, you need to set the TiDB configuration item
log.level
to"info"
or"debug"
and then query the"GENERAL_LOG"
string. The following information is recorded:conn
: The ID of the current session.user
: The current session user.schemaVersion
: The current schema version.txnStartTS
: The timestamp at which the current transaction starts.forUpdateTS
: In the pessimistic transactional mode,forUpdateTS
is the current timestamp of the SQL statement. When a write conflict occurs in the pessimistic transaction, TiDB retries the SQL statement currently being executed and updates this timestamp. You can configure the number of retries viamax-retry-count
. In the optimistic transactional model,forUpdateTS
is equivalent totxnStartTS
.isReadConsistency
: Indicates whether the current transactional isolation level is Read Committed (RC).current_db
: The name of the current database.txn_mode
: The transactional mode. Value options areOPTIMISTIC
andPESSIMISTIC
.sql
: The SQL statement corresponding to the current query.
tidb_non_prepared_plan_cache_size
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
100
- Range:
[1, 100000]
- This variable controls the maximum number of execution plans that can be cached by Non-prepared plan cache.
tidb_generate_binary_plan New in v6.2.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether to generate binary-encoded execution plans in slow logs and statement summaries.
- When this variable is set to
ON
, you can view visual execution plans in TiDB Dashboard. Note that TiDB Dashboard only provides visual display for execution plans generated after this variable is enabled. - You can execute the
SELECT tidb_decode_binary_plan('xxx...')
statement to parse the specific plan from a binary plan.
tidb_gogc_tuner_max_value New in v7.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
500
- Range:
[10, 2147483647]
- The variable is used to control the maximum value of GOGC that the GOGC Tuner can adjust.
tidb_gogc_tuner_min_value New in v7.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
100
- Range:
[10, 2147483647]
- The variable is used to control the minimum value of GOGC that the GOGC Tuner can adjust.
tidb_gogc_tuner_threshold New in v6.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
0.6
- Range:
[0, 0.9)
- This variable specifies the maximum memory threshold for tuning GOGC. When the memory exceeds this threshold, GOGC Tuner stops working.
tidb_guarantee_linearizability New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls the way commit TS is calculated for async commit. By default (with the
ON
value), the two-phase commit requests a new TS from the PD server and uses the TS to calculate the final commit TS. In this situation, linearizability is guaranteed for all the concurrent transactions. - If you set this variable to
OFF
, the process of fetching TS from the PD server is skipped, with the cost that only causal consistency is guaranteed but not linearizability. For more details, see the blog post Async Commit, the Accelerator for Transaction Commit in TiDB 5.0. - For scenarios that require only causal consistency, you can set this variable to
OFF
to improve performance.
tidb_hash_exchange_with_new_collation
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether the MPP hash partition exchange operator is generated in a cluster with new collation enabled.
true
means to generate the operator, andfalse
means not to generate it. - This variable is used for the internal operation of TiDB. It is NOT recommended to set this variable.
tidb_hash_join_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
-1
- Range:
[1, 256]
- Unit: Threads
- This variable is used to set the concurrency of the
hash join
algorithm. - A value of
-1
means that the value oftidb_executor_concurrency
will be used instead.
tidb_hashagg_final_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
-1
- Range:
[1, 256]
- Unit: Threads
- This variable is used to set the concurrency of executing the concurrent
hash aggregation
algorithm in thefinal
phase. - When the parameter of the aggregate function is not distinct,
HashAgg
is run concurrently and respectively in two phases - thepartial
phase and thefinal
phase. - A value of
-1
means that the value oftidb_executor_concurrency
will be used instead.
tidb_hashagg_partial_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
-1
- Range:
[1, 256]
- Unit: Threads
- This variable is used to set the concurrency of executing the concurrent
hash aggregation
algorithm in thepartial
phase. - When the parameter of the aggregate function is not distinct,
HashAgg
is run concurrently and respectively in two phases - thepartial
phase and thefinal
phase. - A value of
-1
means that the value oftidb_executor_concurrency
will be used instead.
tidb_historical_stats_duration New in v6.6.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Duration
- Default value:
168h
, which means 7 days - This variable controls the duration that the historical statistics are retained in the storage.
tidb_idle_transaction_timeout New in v7.6.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 31536000]
- Unit: Seconds
- This variable controls the idle timeout for transactions in a user session. When a user session is in a transactional state and remains idle for a duration exceeding the value of this variable, TiDB will terminate the session. An idle user session means that there are no active requests and the session is waiting for new requests.
- The default value
0
means unlimited.
tidb_ignore_prepared_cache_close_stmt New in v6.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to set whether to ignore the commands for closing prepared statement cache.
- When this variable is set to
ON
, theCOM_STMT_CLOSE
command of the Binary protocol and theDEALLOCATE PREPARE
statement of the text protocol are ignored. For details, see Ignore theCOM_STMT_CLOSE
command and theDEALLOCATE PREPARE
statement.
tidb_index_join_batch_size
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
25000
- Range:
[1, 2147483647]
- Unit: Rows
- This variable is used to set the batch size of the
index lookup join
operation. - Use a bigger value in OLAP scenarios, and a smaller value in OLTP scenarios.
tidb_index_join_double_read_penalty_cost_rate New in v6.6.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Default value:
0
- Range:
[0, 18446744073709551615]
- This variable determines whether to apply a penalty cost to the selection of index join, which reduces the likelihood of the optimizer selecting index join, and increases the likelihood of selecting alternative join methods such as hash join and tiflash join.
- When index join is selected, many table lookup requests are triggered, which consumes too many resources. You can use this variable to reduce the likelihood of the optimizer selecting index join.
- This variable takes effect only when the
tidb_cost_model_version
variable is set to2
.
tidb_index_lookup_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
-1
- Range:
[1, 256]
- Unit: Threads
- This variable is used to set the concurrency of the
index lookup
operation. - Use a bigger value in OLAP scenarios, and a smaller value in OLTP scenarios.
- A value of
-1
means that the value oftidb_executor_concurrency
will be used instead.
tidb_index_lookup_join_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
-1
- Range:
[1, 256]
- Unit: Threads
- This variable is used to set the concurrency of the
index lookup join
algorithm. - A value of
-1
means that the value oftidb_executor_concurrency
will be used instead.
tidb_index_merge_intersection_concurrency New in v6.5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Default value:
-1
- Range:
[1, 256]
- This variable sets the maximum concurrency for the intersection operations that index merge performs. It is effective only when TiDB accesses partitioned tables in the dynamic pruning mode. The actual concurrency is the smaller value of
tidb_index_merge_intersection_concurrency
and the number of partitions of the partitioned table. - The default value
-1
means that the value oftidb_executor_concurrency
is used.
tidb_index_lookup_size
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
20000
- Range:
[1, 2147483647]
- Unit: Rows
- This variable is used to set the batch size of the
index lookup
operation. - Use a bigger value in OLAP scenarios, and a smaller value in OLTP scenarios.
tidb_index_serial_scan_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
1
- Range:
[1, 256]
- Unit: Threads
- This variable is used to set the concurrency of the
serial scan
operation. - Use a bigger value in OLAP scenarios, and a smaller value in OLTP scenarios.
tidb_init_chunk_size
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
32
- Range:
[1, 32]
- Unit: Rows
- This variable is used to set the number of rows for the initial chunk during the execution process. The number of rows for a chunk directly affects the amount of memory required for a single query. You can roughly estimate the memory needed for a single chunk by considering the total width of all columns in the query and the number of rows for the chunk. Combining this with the concurrency of the executor, you can make a rough estimation of the total memory required for a single query. It is recommended that the total memory for a single chunk does not exceed 16 MiB.
tidb_isolation_read_engines New in v4.0
- Scope: SESSION
- Applies to hint SET_VAR: Yes
- Default value:
tikv,tiflash,tidb
- This variable is used to set the storage engine list that TiDB can use when reading data.
tidb_last_ddl_info New in v6.0.0
- Scope: SESSION
- Applies to hint SET_VAR: No
- Default value: ""
- Type: String
- This is a read-only variable. It is internally used in TiDB to get the information of the last DDL operation within the current session.
- "query": The last DDL query string.
- "seq_num": The sequence number for each DDL operation. It is used to identify the order of DDL operations.
tidb_last_query_info New in v4.0.14
- Scope: SESSION
- Applies to hint SET_VAR: No
- Default value: ""
- This is a read-only variable. It is internally used in TiDB to query the transaction information of the last DML statement. The information includes:
txn_scope
: The scope of the transaction, which can beglobal
orlocal
.start_ts
: The start timestamp of the transaction.for_update_ts
: Thefor_update_ts
of the previously executed DML statement. This is an internal term of TiDB used for tests. Usually, you can ignore this information.error
: The error message, if any.ru_consumption
: Consumed RU for executing the statement.
tidb_last_txn_info New in v4.0.9
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: String
- This variable is used to get the last transaction information within the current session. It is a read-only variable. The transaction information includes:
- The transaction scope.
- The start and commit TS.
- The transaction commit mode, which might be a two-phase, one-phase, or async commit.
- The information of transaction fallback from async commit or one-phase commit to two-phase commit.
- The error encountered.
tidb_last_plan_replayer_token New in v6.3.0
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: String
- This variable is read-only and is used to obtain the result of the last
PLAN REPLAYER DUMP
execution in the current session.
tidb_load_based_replica_read_threshold New in v7.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
"1s"
- Range:
[0s, 1h]
- Type: String
- This variable is used to set the threshold for triggering load-based replica read. When the estimated queue time of the leader node exceeds the threshold, TiDB prioritizes reading data from the follower node. The format is a time duration, such as
"100ms"
or"1s"
. For more details, see Troubleshoot Hotspot Issues.
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
"1s"
- Range:
[0s, 1h]
- Type: String
- This variable is used to set the threshold for triggering load-based replica read. When the estimated queue time of the leader node exceeds the threshold, TiDB prioritizes reading data from the follower node. The format is a time duration, such as
"100ms"
or"1s"
. For more details, see Troubleshoot Hotspot Issues.
tidb_load_binding_timeout
New in v8.0.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
200
- Range:
(0, 2147483647]
- Unit: Milliseconds
- This variable is used to control the timeout of loading bindings. If the execution time of loading bindings exceeds this value, the loading will stop.
tidb_lock_unchanged_keys
New in v7.1.1 and v7.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to lock specific keys in the following scenarios. When the value is set to
ON
, these keys are locked. When the value is set toOFF
, these keys are not locked. - To maintain the consistency and rationality of the transaction, it is not recommended to change this value. If upgrading TiDB causes severe performance issues due to these two fixes, and the behavior without locks is acceptable (see the preceding issues), you can set this variable to
OFF
.
tidb_log_file_max_days New in v5.3.0
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 2147483647]
- This variable is used to set the maximum days that the log is retained on the current TiDB instance. Its value defaults to the value of the
max-days
configuration in the configuration file. Changing the variable value only affects the current TiDB instance. After TiDB is restarted, the variable value is reset and the configuration value is not affected.
- This variable is used to set the maximum days that the log is retained on the current TiDB instance.
tidb_low_resolution_tso
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to set whether to enable the low-precision TSO feature. After this feature is enabled, TiDB uses the cached timestamp to read data. The cached timestamp is updated every 2 seconds by default. Starting from v8.0.0, you can configure the update interval by
tidb_low_resolution_tso_update_interval
. - The main applicable scenario is to reduce the overhead of acquiring TSO for small read-only transactions when reading old data is acceptable.
tidb_low_resolution_tso_update_interval
New in v8.0.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
2000
- Range:
[10, 60000]
- Unit: Milliseconds
- This variable is used to set the update interval of the cached timestamp used in the low-precision TSO feature, in milliseconds.
- This variable is only available when
tidb_low_resolution_tso
is enabled.
tidb_max_auto_analyze_time New in v6.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
43200
- Range:
[0, 2147483647]
- Unit: Seconds
- This variable is used to specify the maximum execution time of automatic
ANALYZE
tasks. When the execution time of an automaticANALYZE
task exceeds the specified time, the task will be terminated. When the value of this variable is0
, there is no limit to the maximum execution time of automaticANALYZE
tasks.
tidb_max_bytes_before_tiflash_external_group_by New in v7.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
-1
- Range:
[-1, 9223372036854775807]
- This variable is used to specify the maximum memory usage of the Hash Aggregation operator with
GROUP BY
in TiFlash, in bytes. When the memory usage exceeds the specified value, TiFlash triggers the Hash Aggregation operator to spill to disk. When the value of this variable is-1
, TiDB does not pass this variable to TiFlash. Only when the value of this variable is greater than or equal to0
, TiDB passes this variable to TiFlash. When the value of this variable is0
, it means that the memory usage is unlimited, that is, TiFlash Hash Aggregation operator will not trigger spilling. For details, see TiFlash Spill to Disk.
tidb_max_bytes_before_tiflash_external_join New in v7.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
-1
- Range:
[-1, 9223372036854775807]
- This variable is used to specify the maximum memory usage of the Hash Join operator with
JOIN
in TiFlash, in bytes. When the memory usage exceeds the specified value, TiFlash triggers the Hash Join operator to spill to disk. When the value of this variable is-1
, TiDB does not pass this variable to TiFlash. Only when the value of this variable is greater than or equal to0
, TiDB passes this variable to TiFlash. When the value of this variable is0
, it means that the memory usage is unlimited, that is, TiFlash Hash Join operator will not trigger spilling. For details, see TiFlash Spill to Disk.
tidb_max_bytes_before_tiflash_external_sort New in v7.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
-1
- Range:
[-1, 9223372036854775807]
- This variable is used to specify the maximum memory usage of the TopN and Sort operators in TiFlash, in bytes. When the memory usage exceeds the specified value, TiFlash triggers the TopN and Sort operators to spill to disk. When the value of this variable is
-1
, TiDB does not pass this variable to TiFlash. Only when the value of this variable is greater than or equal to0
, TiDB passes this variable to TiFlash. When the value of this variable is0
, it means that the memory usage is unlimited, that is, TiFlash TopN and Sort operators will not trigger spilling. For details, see TiFlash Spill to Disk.
tidb_max_chunk_size
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1024
- Range:
[32, 2147483647]
- Unit: Rows
- This variable is used to set the maximum number of rows in a chunk during the execution process. Setting to too large of a value may cause cache locality issues. The recommended value for this variable is no larger than 65536. The number of rows for a chunk directly affects the amount of memory required for a single query. You can roughly estimate the memory needed for a single chunk by considering the total width of all columns in the query and the number of rows for the chunk. Combining this with the concurrency of the executor, you can make a rough estimation of the total memory required for a single query. It is recommended that the total memory for a single chunk does not exceed 16 MiB. When the query involves a large amount of data and a single chunk is insufficient to handle all the data, TiDB processes it multiple times, doubling the chunk size with each processing iteration, starting from
tidb_init_chunk_size
until the chunk size reaches the value oftidb_max_chunk_size
.
tidb_max_delta_schema_count New in v2.1.18 and v3.0.5
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1024
- Range:
[100, 16384]
- This variable is used to set the maximum number of schema versions (the table IDs modified for corresponding versions) allowed to be cached. The value range is 100 ~ 16384.
tidb_max_paging_size New in v6.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
50000
- Range:
[1, 9223372036854775807]
- Unit: Rows
- This variable is used to set the maximum number of rows during the coprocessor paging request process. Setting it to too small a value increases the RPC count between TiDB and TiKV, while setting it to too large a value results in excessive memory usage in some cases, such as loading data and full table scan. The default value of this variable brings better performance in OLTP scenarios than in OLAP scenarios. If the application only uses TiKV as the storage engine, consider increasing the value of this variable when executing OLAP workload queries, which might bring you better performance.
tidb_max_tiflash_threads New in v6.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
-1
- Range:
[-1, 256]
- Unit: Threads
- This variable is used to set the maximum concurrency for TiFlash to execute a request. The default value is
-1
, indicating that this system variable is invalid and the maximum concurrency depends on the setting of the TiFlash configurationprofiles.default.max_threads
. When the value is0
, the maximum number of threads is automatically configured by TiFlash.
tidb_mem_oom_action New in v6.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
CANCEL
- Possible values:
CANCEL
,LOG
- Specifies what operation TiDB performs when a single SQL statement exceeds the memory quota specified by
tidb_mem_quota_query
and cannot be spilled over to disk. See TiDB Memory Control for details.
- Specifies what operation TiDB performs when a single SQL statement exceeds the memory quota specified by
tidb_mem_quota_query
and cannot be spilled over to disk.
- The default value is
CANCEL
, but in TiDB v4.0.2 and earlier versions, the default value isLOG
. - This setting was previously a
tidb.toml
option (oom-action
), but changed to a system variable starting from TiDB v6.1.0.
tidb_mem_quota_analyze New in v6.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
-1
- Range:
[-1, 9223372036854775807]
- Unit: Bytes
- This variable controls the maximum memory usage of TiDB updating statistics. Such a memory usage occurs when you manually execute
ANALYZE TABLE
and when TiDB automatically analyzes tasks in the background. When the total memory usage exceeds this threshold, user-executedANALYZE
will exit, and an error message is reported that reminds you to try a lower sampling rate or retry later. If the automatic task in the TiDB background exits because the memory threshold is exceeded, and the sampling rate used is higher than the default value, TiDB will retry the update using the default sampling rate. When this variable value is negative or zero, TiDB does not limit the memory usage of both the manual and automatic update tasks.
tidb_mem_quota_apply_cache New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
33554432
(32 MiB) - Range:
[0, 9223372036854775807]
- Unit: Bytes
- This variable is used to set the memory usage threshold of the local cache in the
Apply
operator. - The local cache in the
Apply
operator is used to speed up the computation of theApply
operator. You can set the variable to0
to disable theApply
cache feature.
tidb_mem_quota_binding_cache New in v6.0.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
67108864
- Range:
[0, 2147483647]
- Unit: Bytes
- This variable is used to set the threshold of the memory used for caching bindings.
- If a system creates or captures excessive bindings, resulting in overuse of memory space, TiDB returns a warning in the log. In this case, the cache cannot hold all available bindings or determine which bindings to store. For this reason, some queries might miss their bindings. To address this problem, you can increase the value of this variable, which increases the memory used for caching bindings. After modifying this parameter, you need to run
admin reload bindings
to reload bindings and validate the modification.
tidb_mem_quota_query
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1073741824
(1 GiB) - Range:
[-1, 9223372036854775807]
- Unit: Bytes
- For versions earlier than TiDB v6.1.0, this is a session scope variable and uses the value of
mem-quota-query
fromtidb.toml
as an initial value. Starting from v6.1.0,tidb_mem_quota_query
is aSESSION | GLOBAL
scope variable. - For versions earlier than TiDB v6.5.0, this variable is used to set the threshold value of memory quota for a query. If the memory quota of a query during execution exceeds the threshold value, TiDB performs the operation defined by
tidb_mem_oom_action
. - For TiDB v6.5.0 and later versions, this variable is used to set the threshold value of memory quota for a session. If the memory quota of a session during execution exceeds the threshold value, TiDB performs the operation defined by
tidb_mem_oom_action
. Note that starting from TiDB v6.5.0, the memory usage of a session contains the memory consumed by the transactions in the session. For the control behavior of transaction memory usage in TiDB v6.5.0 and later versions, seetxn-total-size-limit
. - When you set the variable value to
0
or-1
, the memory threshold is positive infinity. When you set a value smaller than 128, the value will be defaulted to128
.
- For versions earlier than TiDB v6.1.0, this is a session scope variable. Starting from v6.1.0,
tidb_mem_quota_query
is aSESSION | GLOBAL
scope variable. - For versions earlier than TiDB v6.5.0, this variable is used to set the threshold value of memory quota for a query. If the memory quota of a query during execution exceeds the threshold value, TiDB performs the operation defined by
tidb_mem_oom_action
. - For TiDB v6.5.0 and later versions, this variable is used to set the threshold value of memory quota for a session. If the memory quota of a session during execution exceeds the threshold value, TiDB performs the operation defined by
tidb_mem_oom_action
. Note that starting from TiDB v6.5.0, the memory usage of a session contains the memory consumed by the transactions in the session. - When you set the variable value to
0
or-1
, the memory threshold is positive infinity. When you set a value smaller than 128, the value will be defaulted to128
.
tidb_memory_debug_mode_alarm_ratio
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Float
- Default value:
0
- This variable represents the memory statistics error value allowed in the TiDB memory debug mode.
- This variable is used for the internal testing of TiDB. It is NOT recommended to set this variable.
tidb_memory_debug_mode_min_heap_inuse
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- This variable is used for the internal testing of TiDB. It is NOT recommended to set this variable. Enabling this variable will affect the performance of TiDB.
- After configuring this parameter, TiDB will enter the memory debug mode to analyze the accuracy of memory tracking. TiDB will frequently trigger GC during the execution of subsequent SQL statements, and compare the actual memory usage and memory statistics. If the current memory usage is greater than
tidb_memory_debug_mode_min_heap_inuse
and the memory statistics error exceedstidb_memory_debug_mode_alarm_ratio
, TiDB will output the relevant memory information to the log and file.
tidb_memory_usage_alarm_ratio
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Float
- Default value:
0.7
- Range:
[0.0, 1.0]
This variable sets the memory usage ratio that triggers the tidb-server memory alarm. By default, TiDB prints an alarm log when TiDB memory usage exceeds 70% of its total memory and any of the alarm conditions is met.
When this variable is configured to
0
or1
, it means the memory threshold alarm feature is disabled.When this variable is configured to a value greater than
0
and less than1
, it means that the memory threshold alarm feature is enabled.- If the value of the system variable
tidb_server_memory_limit
is0
, the memory alarm threshold istidb_memory-usage-alarm-ratio * system memory size
. - If the value of the system variable
tidb_server_memory_limit
is set to greater than 0, the memory alarm threshold istidb_memory-usage-alarm-ratio * tidb_server_memory_limit
.
- If the value of the system variable
- This variable sets the memory usage ratio that triggers the tidb-server memory alarm.
- When this variable is configured to
0
or1
, it means the memory threshold alarm feature is disabled. - When this variable is configured to a value greater than
0
and less than1
, it means that the memory threshold alarm feature is enabled.
tidb_memory_usage_alarm_keep_record_num New in v6.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
5
- Range:
[1, 10000]
- When the tidb-server memory usage exceeds the memory alarm threshold and triggers an alarm, TiDB only retains the status files generated during the recent 5 alarms by default. You can adjust this number with this variable.
tidb_merge_join_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Range:
[1, 256]
- Default value:
1
- This variable sets the concurrency of the
MergeJoin
operator when a query is executed. - It is NOT recommended to set this variable. Modifying the value of this variable might cause data correctness issues.
tidb_merge_partition_stats_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
1
- This variable specifies the concurrency of merging statistics for a partitioned table when TiDB analyzes the partitioned table.
tidb_enable_async_merge_global_stats New in v7.5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
. When you upgrade TiDB from a version earlier than v7.5.0 to v7.5.0 or a later version, the default value isOFF
. - This variable is used for TiDB to merge global statistics asynchronously to avoid OOM issues.
tidb_metric_query_range_duration New in v4.0
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
60
- Range:
[10, 216000]
- Unit: Seconds
- This variable is used to set the range duration of the Prometheus statement generated when querying
METRICS_SCHEMA
.
tidb_metric_query_step New in v4.0
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
60
- Range:
[10, 216000]
- Unit: Seconds
- This variable is used to set the step of the Prometheus statement generated when querying
METRICS_SCHEMA
.
tidb_min_paging_size New in v6.2.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
128
- Range:
[1, 9223372036854775807]
- Unit: Rows
- This variable is used to set the minimum number of rows during the coprocessor paging request process. Setting it to a too small value increases the RPC request count between TiDB and TiKV, while setting it to a too large value might cause a performance decrease when executing queries using IndexLookup with Limit. The default value of this variable brings better performance in OLTP scenarios than in OLAP scenarios. If the application only uses TiKV as the storage engine, consider increasing the value of this variable when executing OLAP workload queries, which might bring you better performance.
As shown in this diagram, when tidb_enable_paging
is enabled, the performance of TPCH is affected by the settings of tidb_min_paging_size
and tidb_max_paging_size
. The vertical axis is the execution time, and it is the smaller the better.
tidb_mpp_store_fail_ttl
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Duration
- Default value:
60s
- The newly started TiFlash node does not provide services. To prevent queries from failing, TiDB limits the tidb-server sending queries to the newly started TiFlash node. This variable indicates the time range in which the newly started TiFlash node is not sent requests.
tidb_multi_statement_mode New in v4.0.11
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
OFF
- Possible values:
OFF
,ON
,WARN
- This variable controls whether to allow multiple queries to be executed in the same
COM_QUERY
call. - To reduce the impact of SQL injection attacks, TiDB now prevents multiple queries from being executed in the same
COM_QUERY
call by default. This variable is intended to be used as part of an upgrade path from earlier versions of TiDB. The following behaviors apply:
Client setting | tidb_multi_statement_mode value | Multiple statements permitted? |
---|---|---|
Multiple Statements = ON | OFF | Yes |
Multiple Statements = ON | ON | Yes |
Multiple Statements = ON | WARN | Yes |
Multiple Statements = OFF | OFF | No |
Multiple Statements = OFF | ON | Yes |
Multiple Statements = OFF | WARN | Yes (+warning returned) |
tidb_nontransactional_ignore_error New in v6.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable specifies whether to return an error immediately when the error occurs in a non-transactional DML statement.
- When the value is set to
OFF
, the non-transactional DML statement stops immediately at the first error and returns the error. All the following batches are canceled. - When the value is set to
ON
and an error occurs in a batch, the following batches will continue to be executed until all batches are executed. All errors occurred during the execution process are returned together in the result.
tidb_opt_agg_push_down
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable is used to set whether the optimizer executes the optimization operation of pushing down the aggregate function to the position before Join, Projection, and UnionAll.
- When the aggregate operation is slow in query, you can set the variable value to ON.
tidb_opt_broadcast_cartesian_join
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
1
- Range:
[0, 2]
- Indicates whether to allow the Broadcast Cartesian Join.
0
means that the Broadcast Cartesian Join is not allowed.1
means that it is allowed based ontidb_broadcast_join_threshold_count
.2
means that it is always allowed even if the table size exceeds the threshold.- This variable is internally used in TiDB, and it is NOT recommended to modify its value.
tidb_opt_concurrency_factor
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Range:
[0, 18446744073709551615]
- Default value:
3.0
- Indicates the CPU cost of starting a Golang goroutine in TiDB. This variable is internally used in the Cost Model, and it is NOT recommended to modify its value.
tidb_opt_copcpu_factor
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Range:
[0, 18446744073709551615]
- Default value:
3.0
- Indicates the CPU cost for TiKV Coprocessor to process one row. This variable is internally used in the Cost Model, and it is NOT recommended to modify its value.
tidb_opt_correlation_exp_factor
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
1
- Range:
[0, 2147483647]
- When the method that estimates the number of rows based on column order correlation is not available, the heuristic estimation method is used. This variable is used to control the behavior of the heuristic method.
- When the value is 0, the heuristic method is not used.
- When the value is greater than 0:
- A larger value indicates that an index scan will probably be used in the heuristic method.
- A smaller value indicates that a table scan will probably be used in the heuristic method.
tidb_opt_correlation_threshold
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Default value:
0.9
- Range:
[0, 1]
- This variable is used to set the threshold value that determines whether to enable estimating the row count by using column order correlation. If the order correlation between the current column and the
handle
column exceeds the threshold value, this method is enabled.
tidb_opt_cpu_factor
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Range:
[0, 2147483647]
- Default value:
3.0
- Indicates the CPU cost for TiDB to process one row. This variable is internally used in the Cost Model, and it is NOT recommended to modify its value.
tidb_opt_derive_topn
New in v7.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- Controls whether to enable the optimization rule of Deriving TopN or Limit from window functions.
tidb_opt_desc_factor
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Range:
[0, 18446744073709551615]
- Default value:
3.0
- Indicates the cost for TiKV to scan one row from the disk in descending order. This variable is internally used in the Cost Model, and it is NOT recommended to modify its value.
tidb_opt_disk_factor
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Range:
[0, 18446744073709551615]
- Default value:
1.5
- Indicates the I/O cost for TiDB to read or write one byte of data from or to the temporary disk. This variable is internally used in the Cost Model, and it is NOT recommended to modify its value.
tidb_opt_distinct_agg_push_down
- Scope: SESSION
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable is used to set whether the optimizer executes the optimization operation of pushing down the aggregate function with
distinct
(such asselect count(distinct a) from t
) to Coprocessor. - When the aggregate function with the
distinct
operation is slow in the query, you can set the variable value to1
.
In the following example, before tidb_opt_distinct_agg_push_down
is enabled, TiDB needs to read all data from TiKV and execute distinct
on the TiDB side. After tidb_opt_distinct_agg_push_down
is enabled, distinct a
is pushed down to Coprocessor, and a group by
column test.t.a
is added to HashAgg_5
.
mysql> desc select count(distinct a) from test.t;
+-------------------------+----------+-----------+---------------+------------------------------------------+
| id | estRows | task | access object | operator info |
+-------------------------+----------+-----------+---------------+------------------------------------------+
| StreamAgg_6 | 1.00 | root | | funcs:count(distinct test.t.a)->Column#4 |
| └─TableReader_10 | 10000.00 | root | | data:TableFullScan_9 |
| └─TableFullScan_9 | 10000.00 | cop[tikv] | table:t | keep order:false, stats:pseudo |
+-------------------------+----------+-----------+---------------+------------------------------------------+
3 rows in set (0.01 sec)
mysql> set session tidb_opt_distinct_agg_push_down = 1;
Query OK, 0 rows affected (0.00 sec)
mysql> desc select count(distinct a) from test.t;
+---------------------------+----------+-----------+---------------+------------------------------------------+
| id | estRows | task | access object | operator info |
+---------------------------+----------+-----------+---------------+------------------------------------------+
| HashAgg_8 | 1.00 | root | | funcs:count(distinct test.t.a)->Column#3 |
| └─TableReader_9 | 1.00 | root | | data:HashAgg_5 |
| └─HashAgg_5 | 1.00 | cop[tikv] | | group by:test.t.a, |
| └─TableFullScan_7 | 10000.00 | cop[tikv] | table:t | keep order:false, stats:pseudo |
+---------------------------+----------+-----------+---------------+------------------------------------------+
4 rows in set (0.00 sec)
tidb_opt_enable_correlation_adjustment
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
ON
- This variable is used to control whether the optimizer estimates the number of rows based on column order correlation
tidb_opt_enable_hash_join New in v6.5.6, v7.1.2, and v7.4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to control whether the optimizer selects hash joins for tables. The value is
ON
by default. If it is set toOFF
, the optimizer avoids selecting hash joins when generating execution plans, unless no other join algorithm is available. - If both the system variable
tidb_opt_enable_hash_join
and theHASH_JOIN
hint are configured, theHASH_JOIN
hint takes precedence. Even iftidb_opt_enable_hash_join
is set toOFF
, when you specify aHASH_JOIN
hint in a query, the TiDB optimizer still enforces a hash join plan.
tidb_opt_enable_non_eval_scalar_subquery New in v7.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether the
EXPLAIN
statement disables the execution of constant subqueries that can be expanded at the optimization stage. When this variable is set toOFF
, theEXPLAIN
statement expands the subquery in advance at the optimization stage. When this variable is set toON
, theEXPLAIN
statement does not expand the subquery at the optimization stage. For more information, see Disable subquery expansion.
tidb_opt_enable_late_materialization New in v7.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to enable the TiFlash late materialization feature. Note that TiFlash late materialization does not take effect in the fast scan mode.
- When this variable is set to
OFF
to disable the TiFlash late materialization feature, to process aSELECT
statement with filter conditions (WHERE
clause), TiFlash scans all the data of the required columns before filtering. When this variable is set toON
to enable the TiFlash late materialization feature, TiFlash can first scan the column data related to the filter conditions that are pushed down to the TableScan operator, filter the rows that meet the conditions, and then scan the data of other columns of these rows for further calculations, thereby reducing IO scans and computations of data processing.
tidb_opt_enable_mpp_shared_cte_execution New in v7.2.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable controls whether the non-recursive Common Table Expressions (CTE) can be executed on TiFlash MPP. By default, when this variable is disabled, CTE is executed on TiDB, which has a large performance gap compared with enabling this feature.
tidb_opt_enable_fuzzy_binding New in v7.6.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable controls whether to enable the Cross-database binding feature.
tidb_opt_fix_control New in v6.5.3 and v7.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: String
- Default value:
""
- This variable is used to control some internal behaviors of the optimizer.
- The optimizer's behavior might vary depending on user scenarios or SQL statements. This variable provides a more fine-grained control over the optimizer and helps to prevent performance regression after upgrading caused by behavior changes in the optimizer.
- For a more detailed introduction, see Optimizer Fix Controls.
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: String
- Default value:
""
- This variable is used to control some internal behaviors of the optimizer.
- The optimizer's behavior might vary depending on user scenarios or SQL statements. This variable provides a more fine-grained control over the optimizer and helps to prevent performance regression after upgrading caused by behavior changes in the optimizer.
- For a more detailed introduction, see Optimizer Fix Controls.
tidb_opt_force_inline_cte New in v6.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether common table expressions (CTEs) in the entire session are inlined or not. The default value is
OFF
, which means that inlining CTE is not enforced by default. However, you can still inline CTE by specifying theMERGE()
hint. If the variable is set toON
, all CTEs (except recursive CTE) in this session are forced to be inlined.
tidb_opt_advanced_join_hint New in v7.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
ON
- This variable is used to control whether the Join Method hint, such as
HASH_JOIN()
hint andMERGE_JOIN()
hint, affects the Join Reorder optimization process, including the use ofLEADING()
hint. The default value isON
, which means that it does not affect. If it is set toOFF
, there might be conflicts in some scenarios where both Join Method hint andLEADING()
hint are used at the same time.
tidb_opt_insubq_to_join_and_agg
Scope: SESSION | GLOBAL
Persists to cluster: Yes
Applies to hint SET_VAR: Yes
Type: Boolean
Default value:
ON
This variable is used to set whether to enable the optimization rule that converts a subquery to join and aggregation.
For example, after you enable this optimization rule, the subquery is converted as follows:
select * from t where t.a in (select aa from t1);The subquery is converted to join as follows:
select t.* from t, (select aa from t1 group by aa) tmp_t where t.a = tmp_t.aa;If
t1
is limited to beunique
andnot null
in theaa
column. You can use the following statement, without aggregation.select t.* from t, t1 where t.a=t1.aa;
tidb_opt_join_reorder_threshold
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
0
- Range:
[0, 2147483647]
- This variable is used to control the selection of the TiDB Join Reorder algorithm. When the number of nodes participating in Join Reorder is greater than this threshold, TiDB selects the greedy algorithm, and when it is less than this threshold, TiDB selects the dynamic programming algorithm.
- Currently, for OLTP queries, it is recommended to keep the default value. For OLAP queries, it is recommended to set the variable value to 10~15 to get better connection orders in OLAP scenarios.
tidb_opt_limit_push_down_threshold
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
100
- Range:
[0, 2147483647]
- This variable is used to set the threshold that determines whether to push the Limit or TopN operator down to TiKV.
- If the value of the Limit or TopN operator is smaller than or equal to this threshold, these operators are forcibly pushed down to TiKV. This variable resolves the issue that the Limit or TopN operator cannot be pushed down to TiKV partly due to wrong estimation.
tidb_opt_memory_factor
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Range:
[0, 2147483647]
- Default value:
0.001
- Indicates the memory cost for TiDB to store one row. This variable is internally used in the Cost Model, and it is NOT recommended to modify its value.
tidb_opt_mpp_outer_join_fixed_build_side New in v5.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- When the variable value is
ON
, the left join operator always uses inner table as the build side and the right join operator always uses outer table as the build side. If you set the value toOFF
, the outer join operator can use either side of the tables as the build side.
tidb_opt_network_factor
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Range:
[0, 2147483647]
- Default value:
1.0
- Indicates the net cost of transferring 1 byte of data through the network. This variable is internally used in the Cost Model, and it is NOT recommended to modify its value.
tidb_opt_objective New in v7.4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Enumeration
- Default value:
moderate
- Possible values:
moderate
,determinate
- This variable controls the objective of the optimizer.
moderate
maintains the default behavior in versions prior to TiDB v7.4.0, where the optimizer tries to use more information to generate better execution plans.determinate
mode tends to be more conservative and makes the execution plan more stable. - The real-time statistics are the total number of rows and the number of modified rows that are automatically updated based on DML statements. When this variable is set to
moderate
(default), TiDB generates the execution plan based on real-time statistics. When this variable is set todeterminate
, TiDB does not use real-time statistics for generating the execution plan, which will make execution plans more stable. - For long-term stable OLTP workload, or if the user is affirmative on the existing execution plans, it is recommended to use the
determinate
mode to reduce the possibility of unexpected execution plan changes. Additionally, you can use theLOCK STATS
to prevent the statistics from being modified and further stabilize the execution plan.
tidb_opt_ordering_index_selectivity_ratio New in v8.0.0
Scope: SESSION | GLOBAL
Persists to cluster: Yes
Applies to hint SET_VAR: Yes
Type: Float
Default value:
-1
Range:
[-1, 1]
This variable controls the estimated number of rows for an index that matches the SQL statement
ORDER BY
when there areORDER BY
andLIMIT
clauses in a SQL statement, but does not cover some filter conditions.This addresses the same query patterns as the system variable tidb_opt_ordering_index_selectivity_threshold.
It differs in implementation by applying a ratio or percentage of the possible range that the qualified rows will be found.
A value of
-1
(default) or less than0
disables this ratio. Any value between0
and1
applies a ratio of 0% to 100% (for example,0.5
corresponds to50%
).In the following examples, the table
t
has a total of 1,000,000 rows. The same query is used, but different values fortidb_opt_ordering_index_selectivity_ratio
are used. The query in the example contains aWHERE
clause predicate that qualifies a small percentage of rows (9,000 out of 1,000,000). There is an index that supports theORDER BY a
(indexia
), but the filter onb
is not included in this index. Depending on the actual data distribution, the rows matching theWHERE
clause andLIMIT 1
might be found as the first row accessed when scanning the non-filtering index, or at worst, after nearly all the rows have been processed.Each example uses an index hint to demonstrate the impact on estRows. The final plan selection depends on the availability and cost of other plans.
The first example uses the default value
-1
, which uses the existing estimation formula. By default, a small percentage of rows are scanned for estimation before the qualified rows are found.> SET SESSION tidb_opt_ordering_index_selectivity_ratio = -1; > EXPLAIN SELECT * FROM t USE INDEX (ia) WHERE b <= 9000 ORDER BY a LIMIT 1; +-----------------------------------+---------+-----------+-----------------------+---------------------------------+ | id | estRows | task | access object | operator info | +-----------------------------------+---------+-----------+-----------------------+---------------------------------+ | Limit_12 | 1.00 | root | | offset:0, count:1 | | └─Projection_22 | 1.00 | root | | test.t.a, test.t.b, test.t.c | | └─IndexLookUp_21 | 1.00 | root | | | | ├─IndexFullScan_18(Build) | 109.20 | cop[tikv] | table:t, index:ia(a) | keep order:true | | └─Selection_20(Probe) | 1.00 | cop[tikv] | | le(test.t.b, 9000) | | └─TableRowIDScan_19 | 109.20 | cop[tikv] | table:t | keep order:false | +-----------------------------------+---------+-----------+-----------------------+---------------------------------+The second example uses
0
, which assumes that 0% of rows will be scanned before the qualified rows are found.> SET SESSION tidb_opt_ordering_index_selectivity_ratio = 0; > EXPLAIN SELECT * FROM t USE INDEX (ia) WHERE b <= 9000 ORDER BY a LIMIT 1; +-----------------------------------+---------+-----------+-----------------------+---------------------------------+ | id | estRows | task | access object | operator info | +-----------------------------------+---------+-----------+-----------------------+---------------------------------+ | Limit_12 | 1.00 | root | | offset:0, count:1 | | └─Projection_22 | 1.00 | root | | test.t.a, test.t.b, test.t.c | | └─IndexLookUp_21 | 1.00 | root | | | | ├─IndexFullScan_18(Build) | 1.00 | cop[tikv] | table:t, index:ia(a) | keep order:true | | └─Selection_20(Probe) | 1.00 | cop[tikv] | | le(test.t.b, 9000) | | └─TableRowIDScan_19 | 1.00 | cop[tikv] | table:t | keep order:false | +-----------------------------------+---------+-----------+-----------------------+---------------------------------+The third example uses
0.1
, which assumes that 10% of rows will be scanned before the qualified rows are found. This condition is highly selective, with only 1% of rows meeting the condition. Therefore, in the worst-case scenario, it might be necessary to scan 99% of rows before finding the 1% that qualify. 10% of that 99% is approximately 9.9%, which is reflected in the estRows.> SET SESSION tidb_opt_ordering_index_selectivity_ratio = 0.1; > EXPLAIN SELECT * FROM t USE INDEX (ia) WHERE b <= 9000 ORDER BY a LIMIT 1; +-----------------------------------+----------+-----------+-----------------------+---------------------------------+ | id | estRows | task | access object | operator info | +-----------------------------------+----------+-----------+-----------------------+---------------------------------+ | Limit_12 | 1.00 | root | | offset:0, count:1 | | └─Projection_22 | 1.00 | root | | test.t.a, test.t.b, test.t.c | | └─IndexLookUp_21 | 1.00 | root | | | | ├─IndexFullScan_18(Build) | 99085.21 | cop[tikv] | table:t, index:ia(a) | keep order:true | | └─Selection_20(Probe) | 1.00 | cop[tikv] | | le(test.t.b, 9000) | | └─TableRowIDScan_19 | 99085.21 | cop[tikv] | table:t | keep order:false | +-----------------------------------+----------+-----------+-----------------------+---------------------------------+The fourth example uses
1.0
, which assumes that 100% of rows will be scanned before the qualified rows are found.> SET SESSION tidb_opt_ordering_index_selectivity_ratio = 1; > EXPLAIN SELECT * FROM t USE INDEX (ia) WHERE b <= 9000 ORDER BY a LIMIT 1; +-----------------------------------+-----------+-----------+-----------------------+---------------------------------+ | id | estRows | task | access object | operator info | +-----------------------------------+-----------+-----------+-----------------------+---------------------------------+ | Limit_12 | 1.00 | root | | offset:0, count:1 | | └─Projection_22 | 1.00 | root | | test.t.a, test.t.b, test.t.c | | └─IndexLookUp_21 | 1.00 | root | | | | ├─IndexFullScan_18(Build) | 990843.14 | cop[tikv] | table:t, index:ia(a) | keep order:true | | └─Selection_20(Probe) | 1.00 | cop[tikv] | | le(test.t.b, 9000) | | └─TableRowIDScan_19 | 990843.14 | cop[tikv] | table:t | keep order:false | +-----------------------------------+-----------+-----------+-----------------------+---------------------------------+The fifth example also uses
1.0
, but adds a predicate ona
, limiting the scan range in the worst-case scenario. This is becauseWHERE a <= 9000
matches the index, with approximately 9,000 rows would qualify. Given that the filter predicate onb
is not in the index, all the approximately 9,000 rows are considered to be scanned before finding a row that matchesb <= 9000
.> SET SESSION tidb_opt_ordering_index_selectivity_ratio = 1; > EXPLAIN SELECT * FROM t USE INDEX (ia) WHERE a <= 9000 AND b <= 9000 ORDER BY a LIMIT 1; +------------------------------------+---------+-----------+-----------------------+------------------------------------+ | id | estRows | task | access object | operator info | +------------------------------------+---------+-----------+-----------------------+------------------------------------+ | Limit_12 | 1.00 | root | | offset:0, count:1 | | └─Projection_22 | 1.00 | root | | test.t.a, test.t.b, test.t.c | | └─IndexLookUp_21 | 1.00 | root | | | | ├─IndexRangeScan_18(Build) | 9074.99 | cop[tikv] | table:t, index:ia(a) | range:[-inf,9000], keep order:true | | └─Selection_20(Probe) | 1.00 | cop[tikv] | | le(test.t.b, 9000) | | └─TableRowIDScan_19 | 9074.99 | cop[tikv] | table:t | keep order:false | +------------------------------------+---------+-----------+-----------------------+------------------------------------+
tidb_opt_ordering_index_selectivity_threshold New in v7.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Default value:
0
- Range:
[0, 1]
- This variable is used to control how the optimizer selects an index when there are
ORDER BY
andLIMIT
clauses with filter conditions in a SQL statement. - For such queries, the optimizer considers selecting the corresponding index to satisfy the
ORDER BY
andLIMIT
clauses (even if this index does not satisfy any filter conditions). However, due to the complexity of data distribution, the optimizer might select a suboptimal index in this scenario. - This variable represents a threshold. When an index exists that can satisfy filtering conditions and its selectivity estimate is lower than this threshold, the optimizer will avoid selecting an index used to satisfy
ORDER BY
andLIMIT
. Instead, it prioritizes an index that satisfies the filtering conditions. - For example, when the variable is set to
0
, the optimizer maintains its default behavior; when it is set to1
, the optimizer always prioritizes selecting indexes that satisfy the filter conditions and avoids selecting indexes that satisfy bothORDER BY
andLIMIT
clauses. - In the following example, table
t
has a total of 1,000,000 rows. When using an index on columnb
, its estimated row count is approximately 8,748, so its selectivity estimate value is about 0.0087. By default, the optimizer selects an index on columna
. However, after setting this variable to 0.01, since the selectivity of an index on columnb
(0.0087) is less than 0.01, the optimizer selects an index on columnb
.
> EXPLAIN SELECT * FROM t WHERE b <= 9000 ORDER BY a LIMIT 1;
+-----------------------------------+---------+-----------+----------------------+--------------------+
| id | estRows | task | access object | operator info |
+-----------------------------------+---------+-----------+----------------------+--------------------+
| Limit_12 | 1.00 | root | | offset:0, count:1 |
| └─Projection_25 | 1.00 | root | | test.t.a, test.t.b |
| └─IndexLookUp_24 | 1.00 | root | | |
| ├─IndexFullScan_21(Build) | 114.30 | cop[tikv] | table:t, index:ia(a) | keep order:true |
| └─Selection_23(Probe) | 1.00 | cop[tikv] | | le(test.t.b, 9000) |
| └─TableRowIDScan_22 | 114.30 | cop[tikv] | table:t | keep order:false |
+-----------------------------------+---------+-----------+----------------------+--------------------+
> SET SESSION tidb_opt_ordering_index_selectivity_threshold = 0.01;
> EXPLAIN SELECT * FROM t WHERE b <= 9000 ORDER BY a LIMIT 1;
+----------------------------------+---------+-----------+----------------------+-------------------------------------+
| id | estRows | task | access object | operator info |
+----------------------------------+---------+-----------+----------------------+-------------------------------------+
| TopN_9 | 1.00 | root | | test.t.a, offset:0, count:1 |
| └─IndexLookUp_20 | 1.00 | root | | |
| ├─IndexRangeScan_17(Build) | 8748.62 | cop[tikv] | table:t, index:ib(b) | range:[-inf,9000], keep order:false |
| └─TopN_19(Probe) | 1.00 | cop[tikv] | | test.t.a, offset:0, count:1 |
| └─TableRowIDScan_18 | 8748.62 | cop[tikv] | table:t | keep order:false |
+----------------------------------+---------+-----------+----------------------+-------------------------------------+
tidb_opt_prefer_range_scan New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- After you set the value of this variable to
ON
, the optimizer always prefers range scans over full table scans. - In the following example, before you enable
tidb_opt_prefer_range_scan
, the TiDB optimizer performs a full table scan. After you enabletidb_opt_prefer_range_scan
, the optimizer selects an index range scan.
explain select * from t where age=5;
+-------------------------+------------+-----------+---------------+-------------------+
| id | estRows | task | access object | operator info |
+-------------------------+------------+-----------+---------------+-------------------+
| TableReader_7 | 1048576.00 | root | | data:Selection_6 |
| └─Selection_6 | 1048576.00 | cop[tikv] | | eq(test.t.age, 5) |
| └─TableFullScan_5 | 1048576.00 | cop[tikv] | table:t | keep order:false |
+-------------------------+------------+-----------+---------------+-------------------+
3 rows in set (0.00 sec)
set session tidb_opt_prefer_range_scan = 1;
explain select * from t where age=5;
+-------------------------------+------------+-----------+-----------------------------+-------------------------------+
| id | estRows | task | access object | operator info |
+-------------------------------+------------+-----------+-----------------------------+-------------------------------+
| IndexLookUp_7 | 1048576.00 | root | | |
| ├─IndexRangeScan_5(Build) | 1048576.00 | cop[tikv] | table:t, index:idx_age(age) | range:[5,5], keep order:false |
| └─TableRowIDScan_6(Probe) | 1048576.00 | cop[tikv] | table:t | keep order:false |
+-------------------------------+------------+-----------+-----------------------------+-------------------------------+
3 rows in set (0.00 sec)
tidb_opt_prefix_index_single_scan New in v6.4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Default value:
ON
- This variable controls whether the TiDB optimizer pushes down some filter conditions to the prefix index to avoid unnecessary table lookup and to improve query performance.
- When this variable value is set to
ON
, some filter conditions are pushed down to the prefix index. Suppose that thecol
column is the index prefix column in a table. Thecol is null
orcol is not null
condition in the query is handled as a filter condition on the index instead of a filter condition for the table lookup, so that unnecessary table lookup is avoided.
Usage example of tidb_opt_prefix_index_single_scan
Create a table with a prefix index:
CREATE TABLE t (a INT, b VARCHAR(10), c INT, INDEX idx_a_b(a, b(5)));
Disable tidb_opt_prefix_index_single_scan
:
SET tidb_opt_prefix_index_single_scan = 'OFF';
For the following query, the execution plan uses the prefix index idx_a_b
but requires a table lookup (the IndexLookUp
operator appears).
EXPLAIN FORMAT='brief' SELECT COUNT(1) FROM t WHERE a = 1 AND b IS NOT NULL;
+-------------------------------+---------+-----------+------------------------------+-------------------------------------------------------+
| id | estRows | task | access object | operator info |
+-------------------------------+---------+-----------+------------------------------+-------------------------------------------------------+
| HashAgg | 1.00 | root | | funcs:count(Column#8)->Column#5 |
| └─IndexLookUp | 1.00 | root | | |
| ├─IndexRangeScan(Build) | 99.90 | cop[tikv] | table:t, index:idx_a_b(a, b) | range:[1 -inf,1 +inf], keep order:false, stats:pseudo |
| └─HashAgg(Probe) | 1.00 | cop[tikv] | | funcs:count(1)->Column#8 |
| └─Selection | 99.90 | cop[tikv] | | not(isnull(test.t.b)) |
| └─TableRowIDScan | 99.90 | cop[tikv] | table:t | keep order:false, stats:pseudo |
+-------------------------------+---------+-----------+------------------------------+-------------------------------------------------------+
6 rows in set (0.00 sec)
Enable tidb_opt_prefix_index_single_scan
:
SET tidb_opt_prefix_index_single_scan = 'ON';
After enabling this variable, for the following query, the execution plan uses the prefix index idx_a_b
but does not require a table lookup.
EXPLAIN FORMAT='brief' SELECT COUNT(1) FROM t WHERE a = 1 AND b IS NOT NULL;
+--------------------------+---------+-----------+------------------------------+-------------------------------------------------------+
| id | estRows | task | access object | operator info |
+--------------------------+---------+-----------+------------------------------+-------------------------------------------------------+
| StreamAgg | 1.00 | root | | funcs:count(Column#7)->Column#5 |
| └─IndexReader | 1.00 | root | | index:StreamAgg |
| └─StreamAgg | 1.00 | cop[tikv] | | funcs:count(1)->Column#7 |
| └─IndexRangeScan | 99.90 | cop[tikv] | table:t, index:idx_a_b(a, b) | range:[1 -inf,1 +inf], keep order:false, stats:pseudo |
+--------------------------+---------+-----------+------------------------------+-------------------------------------------------------+
4 rows in set (0.00 sec)
tidb_opt_projection_push_down New in v6.1.0
- Scope: SESSION
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- Specifies whether to allow the optimizer to push
Projection
down to the TiKV or TiFlash coprocessor.
tidb_opt_range_max_size New in v6.4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Default value:
67108864
(64 MiB) - Scope:
[0, 9223372036854775807]
- Unit: Bytes
- This variable is used to set the upper limit of memory usage for the optimizer to build scan ranges. When the variable value is
0
, there is no memory limit for building scan ranges. If building exact scan ranges consumes memory that exceeds the limit, the optimizer uses more relaxed scan ranges (such as[[NULL,+inf]]
). If the execution plan does not use exact scan ranges, you can increase the value of this variable to let the optimizer build exact scan ranges.
The usage example of this variable is as follows:
tidb_opt_range_max_size
usage examples
View the default value of this variable. From the result, you can see that the optimizer uses up to 64 MiB of memory to build scan ranges.
SELECT @@tidb_opt_range_max_size;
+----------------------------+
| @@tidb_opt_range_max_size |
+----------------------------+
| 67108864 |
+----------------------------+
1 row in set (0.01 sec)
EXPLAIN SELECT * FROM t use index (idx) WHERE a IN (10,20,30) AND b IN (40,50,60);
In the 64 MiB memory upper limit, the optimizer builds the following exact scan ranges [10 40,10 40], [10 50,10 50], [10 60,10 60], [20 40,20 40], [20 50,20 50], [20 60,20 60], [30 40,30 40], [30 50,30 50], [30 60,30 60]
, as shown in the following execution plan result.
+-------------------------------+---------+-----------+--------------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| id | estRows | task | access object | operator info |
+-------------------------------+---------+-----------+--------------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| IndexLookUp_7 | 0.90 | root | | |
| ├─IndexRangeScan_5(Build) | 0.90 | cop[tikv] | table:t, index:idx(a, b) | range:[10 40,10 40], [10 50,10 50], [10 60,10 60], [20 40,20 40], [20 50,20 50], [20 60,20 60], [30 40,30 40], [30 50,30 50], [30 60,30 60], keep order:false, stats:pseudo |
| └─TableRowIDScan_6(Probe) | 0.90 | cop[tikv] | table:t | keep order:false, stats:pseudo |
+-------------------------------+---------+-----------+--------------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
3 rows in set (0.00 sec)
Now set the upper limit of memory usage for the optimizer to build scan ranges to 1500 bytes.
SET @@tidb_opt_range_max_size = 1500;
Query OK, 0 rows affected (0.00 sec)
EXPLAIN SELECT * FROM t USE INDEX (idx) WHERE a IN (10,20,30) AND b IN (40,50,60);
In the 1500-byte memory limit, the optimizer builds more relaxed scan ranges [10,10], [20,20], [30,30]
, and uses a warning to inform the user that the memory usage required to build exact scan ranges exceeds the limit of tidb_opt_range_max_size
.
+-------------------------------+---------+-----------+--------------------------+-----------------------------------------------------------------+
| id | estRows | task | access object | operator info |
+-------------------------------+---------+-----------+--------------------------+-----------------------------------------------------------------+
| IndexLookUp_8 | 0.09 | root | | |
| ├─Selection_7(Build) | 0.09 | cop[tikv] | | in(test.t.b, 40, 50, 60) |
| │ └─IndexRangeScan_5 | 30.00 | cop[tikv] | table:t, index:idx(a, b) | range:[10,10], [20,20], [30,30], keep order:false, stats:pseudo |
| └─TableRowIDScan_6(Probe) | 0.09 | cop[tikv] | table:t | keep order:false, stats:pseudo |
+-------------------------------+---------+-----------+--------------------------+-----------------------------------------------------------------+
4 rows in set, 1 warning (0.00 sec)
SHOW WARNINGS;
+---------+------+---------------------------------------------------------------------------------------------------------------------------------------------+
| Level | Code | Message |
+---------+------+---------------------------------------------------------------------------------------------------------------------------------------------+
| Warning | 1105 | Memory capacity of 1500 bytes for 'tidb_opt_range_max_size' exceeded when building ranges. Less accurate ranges such as full range are chosen |
+---------+------+---------------------------------------------------------------------------------------------------------------------------------------------+
1 row in set (0.00 sec)
Then set the upper limit of memory usage to 100 bytes:
set @@tidb_opt_range_max_size = 100;
Query OK, 0 rows affected (0.00 sec)
EXPLAIN SELECT * FROM t USE INDEX (idx) WHERE a IN (10,20,30) AND b IN (40,50,60);
In the 100-byte memory limit, the optimizer chooses IndexFullScan
, and uses a warning to inform the user that the memory required to build exact scan ranges exceeds the limit of tidb_opt_range_max_size
.
+-------------------------------+----------+-----------+--------------------------+----------------------------------------------------+
| id | estRows | task | access object | operator info |
+-------------------------------+----------+-----------+--------------------------+----------------------------------------------------+
| IndexLookUp_8 | 8000.00 | root | | |
| ├─Selection_7(Build) | 8000.00 | cop[tikv] | | in(test.t.a, 10, 20, 30), in(test.t.b, 40, 50, 60) |
| │ └─IndexFullScan_5 | 10000.00 | cop[tikv] | table:t, index:idx(a, b) | keep order:false, stats:pseudo |
| └─TableRowIDScan_6(Probe) | 8000.00 | cop[tikv] | table:t | keep order:false, stats:pseudo |
+-------------------------------+----------+-----------+--------------------------+----------------------------------------------------+
4 rows in set, 1 warning (0.00 sec)
SHOW WARNINGS;
+---------+------+---------------------------------------------------------------------------------------------------------------------------------------------+
| Level | Code | Message |
+---------+------+---------------------------------------------------------------------------------------------------------------------------------------------+
| Warning | 1105 | Memory capacity of 100 bytes for 'tidb_opt_range_max_size' exceeded when building ranges. Less accurate ranges such as full range are chosen |
+---------+------+---------------------------------------------------------------------------------------------------------------------------------------------+
1 row in set (0.00 sec)
tidb_opt_scan_factor
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Range:
[0, 2147483647]
- Default value:
1.5
- Indicates the cost for TiKV to scan one row of data from the disk in ascending order. This variable is internally used in the Cost Model, and it is NOT recommended to modify its value.
tidb_opt_seek_factor
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Float
- Range:
[0, 2147483647]
- Default value:
20
- Indicates the start-up cost for TiDB to request data from TiKV. This variable is internally used in the Cost Model, and it is NOT recommended to modify its value.
tidb_opt_skew_distinct_agg New in v6.2.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable sets whether the optimizer rewrites the aggregate functions with
DISTINCT
to the two-level aggregate functions, such as rewritingSELECT b, COUNT(DISTINCT a) FROM t GROUP BY b
toSELECT b, COUNT(a) FROM (SELECT b, a FROM t GROUP BY b, a) t GROUP BY b
. When the aggregation column has serious skew and theDISTINCT
column has many different values, this rewriting can avoid the data skew in the query execution and improve the query performance.
tidb_opt_three_stage_distinct_agg New in v6.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
ON
- This variable specifies whether to rewrite a
COUNT(DISTINCT)
aggregation into a three-stage aggregation in MPP mode. - This variable currently applies to an aggregation that only contains one
COUNT(DISTINCT)
.
tidb_opt_tiflash_concurrency_factor
- Scope: SESSION | GLOBAL
- Persists to cluster: YES
- Applies to hint SET_VAR: Yes
- Type: Float
- Range:
[0, 2147483647]
- Default value:
24.0
- Indicates the concurrency number of TiFlash computation. This variable is internally used in the Cost Model, and it is NOT recommended to modify its value.
tidb_opt_use_invisible_indexes New in v8.0.0
- Scope: SESSION
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable controls whether the optimizer can select invisible indexes for query optimization in the current session. Invisible indexes are maintained by DML statements, but will not be used by the query optimizer. This is useful in scenarios where you want to double-check before removing an index permanently. When the variable is set to
ON
, the optimizer can select invisible indexes for query optimization in the session.
tidb_opt_write_row_id
- Scope: SESSION
- Applies to hint SET_VAR: Yes
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether to allow
INSERT
,REPLACE
, andUPDATE
statements to operate on the_tidb_rowid
column. This variable can be used only when you import data using TiDB tools.
tidb_optimizer_selectivity_level
- Scope: SESSION
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
0
- Range:
[0, 2147483647]
- This variable controls the iteration of the optimizer's estimation logic. After changing the value of this variable, the estimation logic of the optimizer will change greatly. Currently,
0
is the only valid value. It is not recommended to set it to other values.
tidb_partition_prune_mode New in v5.1
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Enumeration
- Default value:
dynamic
- Possible values:
static
,dynamic
,static-only
,dynamic-only
- Specifies whether to use
dynamic
orstatic
mode for partitioned tables. Note that dynamic partitioning is effective only after full table-level statistics, or GlobalStats, are collected. Before GlobalStats are collected, TiDB will use thestatic
mode instead. For detailed information about GlobalStats, see Collect statistics of partitioned tables in dynamic pruning mode. For details about the dynamic pruning mode, see Dynamic Pruning Mode for Partitioned Tables.
tidb_persist_analyze_options New in v5.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether to enable the ANALYZE configuration persistence feature.
tidb_pessimistic_txn_fair_locking New in v7.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- Determines whether to use enhanced pessimistic locking wake-up model for pessimistic transactions. This model strictly controls the wake-up order of pessimistic transactions in the pessimistic locking single-point conflict scenarios to avoid unnecessary wake-ups. It greatly reduces the uncertainty brought by the randomness of the existing wake-up mechanism. If you encounter frequent single-point pessimistic locking conflicts in your business scenario (such as frequent updates to the same row of data), and thus cause frequent statement retries, high tail latency, or even occasional
pessimistic lock retry limit reached
errors, you can try to enable this variable to solve the problem. - This variable is disabled by default for TiDB clusters that are upgraded from versions earlier than v7.0.0 to v7.0.0 or later versions.
tidb_placement_mode New in v6.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
STRICT
- Possible values:
STRICT
,IGNORE
- This variable controls whether DDL statements ignore the placement rules specified in SQL. When the variable value is
IGNORE
, all placement rule options are ignored. - It is intended to be used by logical dump/restore tools to ensure that tables can always be created even if invalid placement rules are assigned. This is similar to how mysqldump writes
SET FOREIGN_KEY_CHECKS=0;
to the start of every dump file.
tidb_plan_cache_invalidation_on_fresh_stats
New in v7.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether to invalidate the plan cache automatically when statistics on related tables are updated.
- After enabling this variable, plan cache can make use of statistics more sufficiently to generate execution plans. For example:
- If execution plans are generated before statistics are available, plan cache re-generates execution plans once the statistics are available.
- If the data distribution of a table changes, causing the previously optimal execution plan to become non-optimal, plan cache re-generates execution plans after the statistics are re-collected.
- This variable is disabled by default for TiDB clusters that are upgraded from a version earlier than v7.1.0 to v7.1.0 or later.
tidb_plan_cache_max_plan_size
New in v7.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Default value:
2097152
(which is 2 MiB) - Range:
[0, 9223372036854775807]
, in bytes. The memory format with the units "KiB|MiB|GiB|TiB" is also supported.0
means no limit. - This variable controls the maximum size of a plan that can be cached in prepared or non-prepared plan cache. If the size of a plan exceeds this value, the plan will not be cached. For more details, see Memory management of prepared plan cache and Non-prepared plan cache.
tidb_pprof_sql_cpu New in v4.0
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 1]
- This variable is used to control whether to mark the corresponding SQL statement in the profile output to identify and troubleshoot performance issues.
tidb_prefer_broadcast_join_by_exchange_data_size New in v7.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Default value:
OFF
- This variable controls whether to use the algorithm with the minimum overhead of network transmission when TiDB selects the MPP Hash Join algorithm. If this variable is enabled, TiDB estimates the size of the data to be exchanged in the network using
Broadcast Hash Join
andShuffled Hash Join
respectively, and then chooses the one with the smaller size. tidb_broadcast_join_threshold_count
andtidb_broadcast_join_threshold_size
will not take effect after this variable is enabled.
tidb_prepared_plan_cache_memory_guard_ratio New in v6.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Float
- Default value:
0.1
- Range:
[0, 1]
- The threshold at which the prepared plan cache triggers a memory protection mechanism. For details, see Memory management of Prepared Plan Cache.
- This setting was previously a
tidb.toml
option (prepared-plan-cache.memory-guard-ratio
), but changed to a system variable starting from TiDB v6.1.0.
tidb_prepared_plan_cache_size New in v6.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
100
- Range:
[1, 100000]
- The maximum number of plans that can be cached in a session. For details, see Memory management of Prepared Plan Cache.
- This setting was previously a
tidb.toml
option (prepared-plan-cache.capacity
), but changed to a system variable starting from TiDB v6.1.0.
tidb_projection_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
-1
- Range:
[-1, 256]
- Unit: Threads
- This variable is used to set the concurrency of the
Projection
operator. - A value of
-1
means that the value oftidb_executor_concurrency
will be used instead.
tidb_query_log_max_len
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
4096
(4 KiB) - Range:
[0, 1073741824]
- Unit: Bytes
- The maximum length of the SQL statement output. When the output length of a statement is larger than the
tidb_query_log_max_len
value, the statement is truncated to output. - This setting was previously also available as a
tidb.toml
option (log.query-log-max-len
), but is only a system variable starting from TiDB v6.1.0.
tidb_rc_read_check_ts New in v6.0.0
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to optimize the timestamp acquisition, which is suitable for scenarios with read-committed isolation level where read-write conflicts are rare. Enabling this variable can avoid the latency and cost of getting the global timestamp, and can optimize the transaction-level read latency.
- If read-write conflicts are severe, enabling this feature will increase the cost and latency of getting the global timestamp, and might cause performance regression. For details, see Read Committed isolation level.
tidb_rc_write_check_ts New in v6.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to optimize the acquisition of timestamps and is suitable for scenarios with few point-write conflicts in
READ-COMMITTED
isolation level of pessimistic transactions. Enabling this variable can avoid the latency and overhead brought by obtaining the global timestamps during the execution of point-write statements. Currently, this variable is applicable to three types of point-write statements:UPDATE
,DELETE
, andSELECT ...... FOR UPDATE
. A point-write statement refers to a write statement that uses the primary key or unique key as a filter condition and the final execution operator containsPOINT-GET
. - If the point-write conflicts are severe, enabling this variable will increase extra overhead and latency, resulting in performance regression. For details, see Read Committed isolation level.
tidb_read_consistency New in v5.4.0
- Scope: SESSION
- Applies to hint SET_VAR: Yes
- Type: String
- Default value:
strict
- This variable is used to control the read consistency for an auto-commit read statement.
- If the variable value is set to
weak
, the locks encountered by the read statement are skipped directly and the read execution might be faster, which is the weak consistency read mode. However, the transaction semantics (such as atomicity) and distributed consistency (such as linearizability) are not guaranteed. - For user scenarios where the auto-commit read needs to return fast and weak consistency read results are acceptable, you can use the weak consistency read mode.
tidb_read_staleness New in v5.4.0
- Scope: SESSION
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
0
- Range:
[-2147483648, 0]
- This variable is used to set the time range of historical data that TiDB can read in the current session. After setting the value, TiDB selects a timestamp as new as possible from the range allowed by this variable, and all subsequent read operations are performed against this timestamp. For example, if the value of this variable is set to
-5
, on the condition that TiKV has the corresponding historical version's data, TiDB selects a timestamp as new as possible within a 5-second time range.
tidb_record_plan_in_slow_log
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to include the execution plan of slow queries in the slow log.
tidb_redact_log
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
OFF
- Possible values:
OFF
,ON
,MARKER
- This variable controls whether to hide the user information in the SQL statement being recorded into the TiDB log and slow log.
- The default value is
OFF
, which means that the user information is not processed in any way. - When you set the variable to
ON
, the user information is hidden. For example, if the executed SQL statement isINSERT INTO t VALUES (1,2)
, the statement is recorded asINSERT INTO t VALUES (?,?)
in the log. - When you set the variable to
MARKER
, the user information is wrapped in‹ ›
. For example, if the executed SQL statement isINSERT INTO t VALUES (1,2)
, the statement is recorded asINSERT INTO t VALUES (‹1›,‹2›)
in the log. If user data contains‹
or›
,‹
is escaped as‹‹
, and›
is escaped as››
. Based on the marked logs, you can decide whether to desensitize the marked information when the logs are displayed.
tidb_regard_null_as_point New in v5.4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether the optimizer can use a query condition including null equivalence as a prefix condition for index access.
- This variable is enabled by default. When it is enabled, the optimizer can reduce the volume of index data to be accessed, which accelerates query execution. For example, if a query involves multiple-column indexes
index(a, b)
and the query condition containsa<=>null and b=1
, the optimizer can use botha<=>null
andb=1
in the query condition for index access. If the variable is disabled, becausea<=>null and b=1
includes the null equivalence condition, the optimizer does not useb=1
for index access.
tidb_remove_orderby_in_subquery New in v6.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value: Before v7.2.0, the default value is
OFF
. Starting from v7.2.0, the default value isON
. - Specifies whether to remove
ORDER BY
clause in a subquery. - In the ISO/IEC SQL standard,
ORDER BY
is mainly used to sort the results of top-level queries. For subqueries, the standard does not require that the results be sorted byORDER BY
. - To sort subquery results, you can usually handle it in the outer query, such as using the window function or using
ORDER BY
again in the outer query. Doing so ensures the order of the final result set.
tidb_replica_read New in v4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Enumeration
- Default value:
leader
- Possible values:
leader
,follower
,leader-and-follower
,prefer-leader
,closest-replicas
,closest-adaptive
, andlearner
. Thelearner
value is introduced in v6.6.0. - This variable is used to control where TiDB reads data.
- For more details about usage and implementation, see Follower read.
tidb_restricted_read_only New in v5.2.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
tidb_restricted_read_only
andtidb_super_read_only
behave similarly. In most cases, you should usetidb_super_read_only
only.- Users with the
SUPER
orSYSTEM_VARIABLES_ADMIN
privilege can modify this variable. However, if the Security Enhanced Mode is enabled, the additionalRESTRICTED_VARIABLES_ADMIN
privilege is required to read or modify this variable. tidb_restricted_read_only
affectstidb_super_read_only
in the following cases:- Setting
tidb_restricted_read_only
toON
will updatetidb_super_read_only
toON
. - Setting
tidb_restricted_read_only
toOFF
leavestidb_super_read_only
unchanged. - If
tidb_restricted_read_only
isON
,tidb_super_read_only
cannot be set toOFF
.
- Setting
- For DBaaS providers of TiDB, if a TiDB cluster is a downstream database of another database, to make the TiDB cluster read-only, you might need to use
tidb_restricted_read_only
with Security Enhanced Mode enabled, which prevents your customers from usingtidb_super_read_only
to make the cluster writable. To achieve this, you need to enable Security Enhanced Mode, use an admin user with theSYSTEM_VARIABLES_ADMIN
andRESTRICTED_VARIABLES_ADMIN
privileges to controltidb_restricted_read_only
, and let your database users use the root user with theSUPER
privilege to controltidb_super_read_only
only. - This variable controls the read-only status of the entire cluster. When the variable is
ON
, all TiDB servers in the entire cluster are in the read-only mode. In this case, TiDB only executes the statements that do not modify data, such asSELECT
,USE
, andSHOW
. For other statements such asINSERT
andUPDATE
, TiDB rejects executing those statements in the read-only mode. - Enabling the read-only mode using this variable only ensures that the entire cluster finally enters the read-only status. If you have changed the value of this variable in a TiDB cluster but the change has not yet propagated to other TiDB servers, the un-updated TiDB servers are still not in the read-only mode.
- TiDB checks the read-only flag before SQL statements are executed. Since v6.2.0, the flag is also checked before SQL statements are committed. This helps prevent the case where long-running auto commit statements might modify data after the server has been placed in read-only mode.
- When this variable is enabled, TiDB handles the uncommitted transactions in the following ways:
- For uncommitted read-only transactions, you can commit the transactions normally.
- For uncommitted transactions that are not read-only, SQL statements that perform write operations in these transactions are rejected.
- For uncommitted read-only transactions with modified data, the commit of these transactions is rejected.
- After the read-only mode is enabled, all users (including the users with the
SUPER
privilege) cannot execute the SQL statements that might write data unless the user is explicitly granted theRESTRICTED_REPLICA_WRITER_ADMIN
privilege.
tidb_request_source_type New in v7.4.0
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: String
- Default value:
""
- Possible values:
"ddl"
,"stats"
,"br"
,"lightning"
,"background"
- This variable is used to explicitly specify the task type for the current session, which is identified and controlled by Resource Control. For example:
SET @@tidb_request_source_type = "background"
.
tidb_resource_control_strict_mode New in v8.2.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether privilege control is applied to the
SET RESOURCE GROUP
statement and theRESOURCE_GROUP()
optimizer hint. When this system variable is set toON
, you need to have theSUPER
orRESOURCE_GROUP_ADMIN
orRESOURCE_GROUP_USER
privilege to change the bound resource group of the current session or current statement via these two ways. When it is set toOFF
, none of these privileges are required, and the behavior is the same as earlier TiDB versions without this variable. - When you upgrade your TiDB cluster from an earlier version to v8.2.0 or later, the default value of this variable is set to
OFF
, which means this feature is disabled by default.
tidb_retry_limit
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
10
- Range:
[-1, 9223372036854775807]
- This variable is used to set the maximum number of the retries for optimistic transactions. When a transaction encounters retryable errors (such as transaction conflicts, very slow transaction commit, or table schema changes), this transaction is re-executed according to this variable. Note that setting
tidb_retry_limit
to0
disables the automatic retry. This variable only applies to optimistic transactions, not to pessimistic transactions.
tidb_row_format_version
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
2
- Range:
[1, 2]
- Controls the format version of the newly saved data in the table. In TiDB v4.0, the new storage row format version
2
is used by default to save new data. - If you upgrade from a TiDB version earlier than v4.0.0 to v4.0.0 or later versions, the format version is not changed, and TiDB continues to use the old format of version
1
to write data to the table, which means that only newly created clusters use the new data format by default. - Note that modifying this variable does not affect the old data that has been saved, but applies the corresponding version format only to the newly written data after modifying this variable.
tidb_runtime_filter_mode New in v7.2.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Enumeration
- Default value:
OFF
- Possible values:
OFF
,LOCAL
- Controls the mode of Runtime Filter, that is, the relationship between the Filter Sender operator and Filter Receiver operator. There are two modes:
OFF
andLOCAL
.OFF
means disabling Runtime Filter.LOCAL
means enabling Runtime Filter in the local mode. For more information, see Runtime Filter mode.
tidb_runtime_filter_type New in v7.2.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Enumeration
- Default value:
IN
- Possible values:
IN
- Controls the type of predicate used by the generated Filter operator. Currently, only one type is supported:
IN
. For more information, see Runtime Filter type.
tidb_scatter_region
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- By default, Regions are split for a new table when it is being created in TiDB. After this variable is enabled, the newly split Regions are scattered immediately during the execution of the
CREATE TABLE
statement. This applies to the scenario where data need to be written in batches right after the tables are created in batches, because the newly split Regions can be scattered in TiKV beforehand and do not have to wait to be scheduled by PD. To ensure the continuous stability of writing data in batches, theCREATE TABLE
statement returns success only after the Regions are successfully scattered. This makes the statement's execution time multiple times longer than that when you disable this variable. - Note that if
SHARD_ROW_ID_BITS
andPRE_SPLIT_REGIONS
have been set when a table is created, the specified number of Regions are evenly split after the table creation.
tidb_schema_cache_size New in v8.0.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 9223372036854775807]
- This variable controls the size of the schema cache in TiDB. The unit is byte. The default value is
0
, which means that the cache limit feature is not enabled. When this feature is enabled, TiDB uses the value you set as the maximum available memory limit, and uses the Least Recently Used (LRU) algorithm to cache the required tables, effectively reducing the memory occupied by the schema information.
tidb_schema_version_cache_limit New in v7.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
16
- Range:
[2, 255]
- This variable limits how many historical schema versions can be cached in a TiDB instance. The default value is
16
, which means that TiDB caches 16 historical schema versions by default. - Generally, you do not need to modify this variable. When the Stale Read feature is used and DDL operations are executed very frequently, it will cause the schema version to change very frequently. Consequently, when Stale Read tries to obtain schema information from a snapshot, it might take a lot of time to rebuild the information due to schema cache misses. In this case, you can increase the value of
tidb_schema_version_cache_limit
(for example,32
) to avoid the problem of schema cache misses. - Modifying this variable causes the memory usage of TiDB to increase slightly. Monitor the memory usage of TiDB to avoid OOM problems.
tidb_server_memory_limit New in v6.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
80%
- Range:
- You can set the value in the percentage format, which means the percentage of the memory usage relative to the total memory. The value range is
[1%, 99%]
. - You can also set the value in memory size. The value range is
0
and[536870912, 9223372036854775807]
in bytes. The memory format with the units "KiB|MiB|GiB|TiB" is supported.0
means no memory limit. - If this variable is set to a memory size that is less than 512 MiB but not
0
, TiDB uses 512 MiB as the actual size.
- You can set the value in the percentage format, which means the percentage of the memory usage relative to the total memory. The value range is
- This variable specifies the memory limit for a TiDB instance. When the memory usage of TiDB reaches the limit, TiDB cancels the currently running SQL statement with the highest memory usage. After the SQL statement is successfully canceled, TiDB tries to call Golang GC to immediately reclaim memory to relieve memory stress as soon as possible.
- Only the SQL statements with more memory usage than the
tidb_server_memory_limit_sess_min_size
limit are selected as the SQL statements to be canceled first. - Currently, TiDB cancels only one SQL statement at a time. After TiDB completely cancels a SQL statement and recovers resources, if the memory usage is still greater than the limit set by this variable, TiDB starts the next cancel operation.
tidb_server_memory_limit_gc_trigger New in v6.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
70%
- Range:
[50%, 99%]
- The threshold at which TiDB tries to trigger GC. When the memory usage of TiDB reaches the value of
tidb_server_memory_limit
* the value oftidb_server_memory_limit_gc_trigger
, TiDB will actively trigger a Golang GC operation. Only one GC operation will be triggered in one minute.
tidb_server_memory_limit_sess_min_size New in v6.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
134217728
(which is 128 MiB) - Range:
[128, 9223372036854775807]
, in bytes. The memory format with the units "KiB|MiB|GiB|TiB" is also supported. - After you enable the memory limit, TiDB will terminate the SQL statement with the highest memory usage on the current instance. This variable specifies the minimum memory usage of the SQL statement to be terminated. If the memory usage of a TiDB instance that exceeds the limit is caused by too many sessions with low memory usage, you can properly lower the value of this variable to allow more sessions to be canceled.
tidb_service_scope New in v7.4.0
- Scope: GLOBAL
- Persists to cluster: No
- Applies to hint SET_VAR: No
- Type: String
- Default value: ""
- Optional value: a string with a length of up to 64 characters. Valid characters include digits
0-9
, lettersa-zA-Z
, underscores_
, and hyphens-
. - This variable is an instance-level system variable. You can use it to control the service scope of each TiDB node under the TiDB Distributed eXecution Framework (DXF). The DXF determines which TiDB nodes can be scheduled to execute distributed tasks based on the value of this variable. For specific rules, see Task scheduling.
tidb_session_alias New in v7.4.0
- Scope: SESSION
- Persists to cluster: No
- Applies to hint SET_VAR: Yes
- Default value: ""
- You can use this variable to customize the value of the
session_alias
column in the logs related to the current session, which helps identify the session in troubleshooting. This setting affects the logs of multiple nodes involved in the statement execution (including TiKV). The maximum length of this variable is limited to 64 characters, and any characters exceeding the length will be truncated automatically. Spaces at the end of the value will also be removed automatically.
tidb_session_plan_cache_size New in v7.1.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
100
- Range:
[1, 100000]
- This variable controls the maximum number of plans that can be cached. Prepared plan cache and non-prepared plan cache share the same cache.
- When you upgrade from an earlier version to a v7.1.0 or later version, this variable remains the same value as
tidb_prepared_plan_cache_size
tidb_shard_allocate_step New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
9223372036854775807
- Range:
[1, 9223372036854775807]
- This variable controls the maximum number of continuous IDs to be allocated for the
AUTO_RANDOM
orSHARD_ROW_ID_BITS
attribute. Generally,AUTO_RANDOM
IDs or theSHARD_ROW_ID_BITS
annotated row IDs are incremental and continuous in one transaction. You can use this variable to solve the hotspot issue in large transaction scenarios.
tidb_simplified_metrics
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- When this variable is enabled, TiDB does not collect or record the metrics that are not used in the Grafana panels.
tidb_skip_ascii_check New in v5.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to set whether to skip ASCII validation.
- Validating ASCII characters affects the performance. When you are sure that the input characters are valid ASCII characters, you can set the variable value to
ON
.
tidb_skip_isolation_level_check
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- After this switch is enabled, if an isolation level unsupported by TiDB is assigned to
tx_isolation
, no error is reported. This helps improve compatibility with applications that set (but do not depend on) a different isolation level.
tidb> set tx_isolation='serializable';
ERROR 8048 (HY000): The isolation level 'serializable' is not supported. Set tidb_skip_isolation_level_check=1 to skip this error
tidb> set tidb_skip_isolation_level_check=1;
Query OK, 0 rows affected (0.00 sec)
tidb> set tx_isolation='serializable';
Query OK, 0 rows affected, 1 warning (0.00 sec)
tidb_skip_missing_partition_stats New in v7.3.0
Scope: SESSION | GLOBAL
Persists to cluster: Yes
Applies to hint SET_VAR: No
Type: Boolean
Default value:
ON
When accessing a partitioned table in dynamic pruning mode, TiDB aggregates the statistics of each partition to generate GlobalStats. This variable controls the generation of GlobalStats when partition statistics are missing.
- If this variable is
ON
, TiDB skips missing partition statistics when generating GlobalStats so the generation of GlobalStats is not affected. - If this variable is
OFF
, TiDB stops generating GlobalStats when it detects any missing partition statistics.
- If this variable is
tidb_skip_utf8_check
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to set whether to skip UTF-8 validation.
- Validating UTF-8 characters affects the performance. When you are sure that the input characters are valid UTF-8 characters, you can set the variable value to
ON
.
tidb_slow_log_threshold
- Scope: GLOBAL
- Persists to cluster: No, only applicable to the current TiDB instance that you are connecting to.
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
300
- Range:
[-1, 9223372036854775807]
- Unit: Milliseconds
- This variable outputs the threshold value of the time consumed by the slow log, and is set to 300 milliseconds by default. When the time consumed by a query is larger than this value, this query is considered as a slow query and its log is output to the slow query log. Note that when the output level of
log.level
is"debug"
, all queries are recorded in the slow query log, regardless of the setting of this variable.
tidb_slow_query_file
- Scope: SESSION
- Applies to hint SET_VAR: No
- Default value: ""
- When
INFORMATION_SCHEMA.SLOW_QUERY
is queried, only the slow query log name set byslow-query-file
in the configuration file is parsed. The default slow query log name is "tidb-slow.log". To parse other logs, set thetidb_slow_query_file
session variable to a specific file path, and then queryINFORMATION_SCHEMA.SLOW_QUERY
to parse the slow query log based on the set file path.
For details, see Identify Slow Queries.
tidb_snapshot
- Scope: SESSION
- Applies to hint SET_VAR: No
- Default value: ""
- This variable is used to set the time point at which the data is read by the session. For example, when you set the variable to "2017-11-11 20:20:20" or a TSO number like "400036290571534337", the current session reads the data of this moment.
tidb_source_id New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1
- Range:
[1, 15]
- This variable is used to configure the different cluster IDs in a bi-directional replication cluster.
- This variable is used to configure the different cluster IDs in a bi-directional replication cluster.
tidb_stats_cache_mem_quota New in v6.1.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Unit: Byte
- Default value:
0
, which means that the memory quota is automatically set to half of the total memory size of the TiDB instance. - Range:
[0, 1099511627776]
- This variable sets the memory quota for the TiDB statistics cache.
tidb_stats_load_pseudo_timeout New in v5.4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls how TiDB behaves when the waiting time of SQL optimization reaches the timeout to synchronously load complete column statistics. The default value
ON
means that the SQL optimization gets back to using pseudo statistics after the timeout. If this variable toOFF
, SQL execution fails after the timeout.
tidb_stats_load_sync_wait New in v5.4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
100
- Range:
[0, 2147483647]
- Unit: Milliseconds
- This variable controls whether to enable the synchronously loading statistics feature. The value
0
means that the feature is disabled. To enable the feature, you can set this variable to a timeout (in milliseconds) that SQL optimization can wait for at most to synchronously load complete column statistics. For details, see Load statistics.
tidb_stmt_summary_enable_persistent New in v6.6.0
- Scope: GLOBAL
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is read-only. It controls whether to enable statements summary persistence.
- The value of this variable is the same as that of the configuration item
tidb_stmt_summary_enable_persistent
.
tidb_stmt_summary_filename New in v6.6.0
- Scope: GLOBAL
- Applies to hint SET_VAR: No
- Type: String
- Default value:
"tidb-statements.log"
- This variable is read-only. It specifies the file to which persistent data is written when statements summary persistence is enabled.
- The value of this variable is the same as that of the configuration item
tidb_stmt_summary_filename
.
tidb_stmt_summary_file_max_backups New in v6.6.0
- Scope: GLOBAL
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- This variable is read-only. It specifies the maximum number of data files that can be persisted when statements summary persistence is enabled.
- The value of this variable is the same as that of the configuration item
tidb_stmt_summary_file_max_backups
.
tidb_stmt_summary_file_max_days New in v6.6.0
- Scope: GLOBAL
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
3
- Unit: day
- This variable is read-only. It specifies the maximum number of days to keep persistent data files when statements summary persistence is enabled.
- The value of this variable is the same as that of the configuration item
tidb_stmt_summary_file_max_days
.
tidb_stmt_summary_file_max_size New in v6.6.0
- Scope: GLOBAL
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
64
- Unit: MiB
- This variable is read-only. It specifies the maximum size of a persistent data file when statements summary persistence is enabled.
- The value of this variable is the same as that of the configuration item
tidb_stmt_summary_file_max_size
.
tidb_stmt_summary_history_size New in v4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
24
- Range:
[0, 255]
- This variable is used to set the history capacity of statement summary tables.
tidb_stmt_summary_internal_query New in v4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether to include the SQL information of TiDB in statement summary tables.
tidb_stmt_summary_max_sql_length New in v4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
4096
- Range:
[0, 2147483647]
- Unit: Bytes
- This variable is used to control the length of the SQL string in statement summary tables and the TiDB Dashboard.
- This variable is used to control the length of the SQL string in statement summary tables.
tidb_stmt_summary_max_stmt_count New in v4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
3000
- Range:
[1, 32767]
- This variable is used to set the maximum number of statements that statement summary tables store in memory.
tidb_stmt_summary_refresh_interval New in v4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1800
- Range:
[1, 2147483647]
- Unit: Seconds
- This variable is used to set the refresh time of statement summary tables.
tidb_store_batch_size
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: Yes
- Type: Integer
- Default value:
4
- Range:
[0, 25000]
- This variable is used to control the batch size of the Coprocessor Tasks of the
IndexLookUp
operator.0
means to disable batch. When the number of tasks is relatively large and slow queries occur, you can increase this variable to optimize the query.
tidb_store_limit New in v3.0.4 and v4.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 9223372036854775807]
- This variable is used to limit the maximum number of requests TiDB can send to TiKV at the same time. 0 means no limit.
tidb_streamagg_concurrency
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1
- This variable sets the concurrency of the
StreamAgg
operator when queries are executed. - It is NOT recommended to set this variable. Modifying the variable value might cause data correctness issues.
tidb_super_read_only New in v5.3.1
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
tidb_super_read_only
aims to be implemented as a replacement of the MySQL variablesuper_read_only
. However, because TiDB is a distributed database,tidb_super_read_only
does not make the database read-only immediately after execution, but eventually.- Users with the
SUPER
orSYSTEM_VARIABLES_ADMIN
privilege can modify this variable. - This variable controls the read-only status of the entire cluster. When the variable is
ON
, all TiDB servers in the entire cluster are in the read-only mode. In this case, TiDB only executes the statements that do not modify data, such asSELECT
,USE
, andSHOW
. For other statements such asINSERT
andUPDATE
, TiDB rejects executing those statements in the read-only mode. - Enabling the read-only mode using this variable only ensures that the entire cluster finally enters the read-only status. If you have changed the value of this variable in a TiDB cluster but the change has not yet propagated to other TiDB servers, the un-updated TiDB servers are still not in the read-only mode.
- TiDB checks the read-only flag before SQL statements are executed. Since v6.2.0, the flag is also checked before SQL statements are committed. This helps prevent the case where long-running auto commit statements might modify data after the server has been placed in read-only mode.
- When this variable is enabled, TiDB handles the uncommitted transactions in the following ways:
- For uncommitted read-only transactions, you can commit the transactions normally.
- For uncommitted transactions that are not read-only, SQL statements that perform write operations in these transactions are rejected.
- For uncommitted read-only transactions with modified data, the commit of these transactions is rejected.
- After the read-only mode is enabled, all users (including the users with the
SUPER
privilege) cannot execute the SQL statements that might write data unless the user is explicitly granted theRESTRICTED_REPLICA_WRITER_ADMIN
privilege. - When the
tidb_restricted_read_only
system variable is set toON
,tidb_super_read_only
is affected bytidb_restricted_read_only
in some cases. For detailed impact, see the description oftidb_restricted_read_only
.
tidb_sysdate_is_now New in v6.0.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
OFF
- This variable is used to control whether the
SYSDATE
function can be replaced by theNOW
function. This configuration item has the same effect as the MySQL optionsysdate-is-now
.
tidb_sysproc_scan_concurrency New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1
- Range:
[0, 4294967295]
. The maximum value for v7.5.0 and earlier versions is256
. Before v8.2.0, the minimum value is1
. When you set it to0
, it adaptively adjusts the concurrency based on the cluster size. - This variable is used to set the concurrency of scan operations performed when TiDB executes internal SQL statements (such as an automatic update of statistics).
tidb_table_cache_lease New in v6.0.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
3
- Range:
[1, 10]
- Unit: Seconds
- This variable is used to control the lease time of cached tables with a default value of
3
. The value of this variable affects the modification to cached tables. After a modification is made to cached tables, the longest waiting time might betidb_table_cache_lease
seconds. If the table is read-only or can accept a high write latency, you can increase the value of this variable to increase the valid time for caching tables and to reduce the frequency of lease renewal.
tidb_tmp_table_max_size New in v5.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
67108864
- Range:
[1048576, 137438953472]
- Unit: Bytes
- This variable is used to set the maximum size of a single temporary table. Any temporary table with a size larger than this variable value causes error.
tidb_top_sql_max_meta_count New in v6.0.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
5000
- Range:
[1, 10000]
- This variable is used to control the maximum number of SQL statement types collected by Top SQL per minute.
- This variable is used to control the maximum number of SQL statement types collected by Top SQL per minute.
tidb_top_sql_max_time_series_count New in v6.0.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
100
- Range:
[1, 5000]
- This variable is used to control how many SQL statements that contribute the most to the load (that is, top N) can be recorded by Top SQL per minute.
- This variable is used to control how many SQL statements that contribute the most to the load (that is, top N) can be recorded by Top SQL per minute.
tidb_track_aggregate_memory_usage
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether TiDB tracks the memory usage of aggregate functions.
tidb_tso_client_batch_max_wait_time New in v5.3.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Float
- Default value:
0
- Range:
[0, 10]
- Unit: Milliseconds
- This variable is used to set the maximum waiting time for a batch operation when TiDB requests TSO from PD. The default value is
0
, which means no extra waiting time. - When obtaining TSO requests from PD each time, PD Client, used by TiDB, collects as many TSO requests received at the same time as possible. Then, PD Client merges the collected requests in batch into one RPC request and sends the request to PD. This helps reduce the pressure on PD.
- After setting this variable to a value greater than
0
, TiDB waits for the maximum duration of this value before the end of each batch merge. This is to collect more TSO requests and improve the effect of batch operations. - Scenarios for increasing the value of this variable:
- Due to the high pressure of TSO requests, the CPU of the PD leader reaches a bottleneck, which causes high latency of TSO RPC requests.
- There are not many TiDB instances in the cluster, but every TiDB instance is in high concurrency.
- It is recommended to set this variable to a value as small as possible.
tidb_ttl_delete_rate_limit New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
0
- Range:
[0, 9223372036854775807]
- This variable is used to limit the rate of
DELETE
statements in TTL jobs on each TiDB node. The value represents the maximum number ofDELETE
statements allowed per second in a single node in a TTL job. When this variable is set to0
, no limit is applied. For more information, refer to Time to Live.
tidb_ttl_delete_batch_size New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
100
- Range:
[1, 10240]
- This variable is used to set the maximum number of rows that can be deleted in a single
DELETE
transaction in a TTL job. For more information, refer to Time to Live.
tidb_ttl_delete_worker_count New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
4
- Range:
[1, 256]
- This variable is used to set the maximum concurrency of TTL jobs on each TiDB node. For more information, refer to Time to Live.
tidb_ttl_job_enable New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
ON
- Type: Boolean
- This variable is used to control whether TTL jobs are enabled. If it is set to
OFF
, all tables with TTL attributes automatically stop cleaning up expired data. For more information, refer to Time to Live.
tidb_ttl_scan_batch_size New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
500
- Range:
[1, 10240]
- This variable is used to set the
LIMIT
value of eachSELECT
statement used to scan expired data in a TTL job. For more information, refer to Time to Live.
tidb_ttl_scan_worker_count New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
4
- Range:
[1, 256]
- This variable is used to set the maximum concurrency of TTL scan jobs on each TiDB node. For more information, refer to Time to Live.
tidb_ttl_job_schedule_window_start_time New in v6.5.0
- Scope: GLOBAL
- Applies to hint SET_VAR: No
- Type: Time
- Persists to cluster: Yes
- Default value:
00:00 +0000
- This variable is used to control the start time of the scheduling window of TTL jobs in the background. When you modify the value of this variable, be cautious that a small window might cause the cleanup of expired data to fail. For more information, refer to Time to Live.
tidb_ttl_job_schedule_window_end_time New in v6.5.0
- Scope: GLOBAL
- Applies to hint SET_VAR: No
- Type: Time
- Persists to cluster: Yes
- Default value:
23:59 +0000
- This variable is used to control the end time of the scheduling window of TTL jobs in the background. When you modify the value of this variable, be cautious that a small window might cause the cleanup of expired data to fail. For more information, refer to Time to Live.
tidb_ttl_running_tasks New in v7.0.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
-1
- Range:
-1
and[1, 256]
- Specifies the maximum number of running TTL tasks in the entire cluster.
-1
means the number of TTL tasks is equivalent to the number of TiKV nodes. For more information, refer to Time to Live.
tidb_txn_assertion_level New in v6.0.0
Scope: SESSION | GLOBAL
Persists to cluster: Yes
Applies to hint SET_VAR: No
Type: Enumeration
Default value:
FAST
Possible values:
OFF
,FAST
,STRICT
This variable is used to control the assertion level. Assertion is a consistency check between data and indexes, which checks whether a key being written exists in the transaction commit process. For more information, see Troubleshoot Inconsistency Between Data and Indexes.
OFF
: Disable this check.FAST
: Enable most of the check items, with almost no impact on performance.STRICT
: Enable all check items, with a minor impact on pessimistic transaction performance when the system workload is high.
For new clusters of v6.0.0 or later versions, the default value is
FAST
. For existing clusters that upgrade from versions earlier than v6.0.0, the default value isOFF
.
tidb_txn_commit_batch_size New in v6.2.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
16384
- Range:
[1, 1073741824]
- Unit: Bytes
- This variable is used to control the batch size of transaction commit requests that TiDB sends to TiKV. If most of the transactions in the application workload have a large number of write operations, adjusting this variable to a larger value can improve the performance of batch processing. However, if this variable is set to too large a value and exceeds the limit of TiKV's
raft-entry-max-size
, the commits might fail.
- This variable is used to control the batch size of transaction commit requests that TiDB sends to TiKV. If most of the transactions in the application workload have a large number of write operations, adjusting this variable to a larger value can improve the performance of batch processing. However, if this variable is set to too large a value and exceeds the limit of TiKV's maximum size of a single log (which is 8 MiB by default), the commits might fail.
tidb_txn_entry_size_limit New in v7.6.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 125829120]
- Unit: Bytes
- This variable is used to dynamically modify the TiDB configuration item
performance.txn-entry-size-limit
. It limits the size of a single row of data in TiDB, which is equivalent to the configuration item. The default value of this variable is0
, which means that TiDB uses the value of the configuration itemtxn-entry-size-limit
by default. When this variable is set to a non-zero value,txn-entry-size-limit
is also set to the same value.
- This variable is used to dynamically modify the TiDB configuration item
performance.txn-entry-size-limit
. It limits the size of a single row of data in TiDB, which is equivalent to the configuration item. The default value of this variable is0
, which means that TiDB uses the value of the configuration itemtxn-entry-size-limit
by default. When this variable is set to a non-zero value,txn-entry-size-limit
is also set to the same value.
tidb_txn_mode
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
pessimistic
- Possible values:
pessimistic
,optimistic
- This variable is used to set the transaction mode. TiDB 3.0 supports the pessimistic transactions. Since TiDB 3.0.8, the pessimistic transaction mode is enabled by default.
- If you upgrade TiDB from v3.0.7 or earlier versions to v3.0.8 or later versions, the default transaction mode does not change. Only the newly created clusters use the pessimistic transaction mode by default.
- If this variable is set to "optimistic" or "", TiDB uses the optimistic transaction mode.
tidb_use_plan_baselines New in v4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable is used to control whether to enable the execution plan binding feature. It is enabled by default, and can be disabled by assigning the
OFF
value. For the use of the execution plan binding, see Execution Plan Binding.
tidb_wait_split_region_finish
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- It usually takes a long time to scatter Regions, which is determined by PD scheduling and TiKV loads. This variable is used to set whether to return the result to the client after all Regions are scattered completely when the
SPLIT REGION
statement is being executed:ON
requires that theSPLIT REGIONS
statement waits until all Regions are scattered.OFF
permits theSPLIT REGIONS
statement to return before finishing scattering all Regions.
- Note that when scattering Regions, the write and read performances for the Region that is being scattered might be affected. In batch-write or data importing scenarios, it is recommended to import data after Regions scattering is finished.
tidb_wait_split_region_timeout
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
300
- Range:
[1, 2147483647]
- Unit: Seconds
- This variable is used to set the timeout for executing the
SPLIT REGION
statement. If a statement is not executed completely within the specified time value, a timeout error is returned.
tidb_window_concurrency New in v4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
-1
- Range:
[1, 256]
- Unit: Threads
- This variable is used to set the concurrency degree of the window operator.
- A value of
-1
means that the value oftidb_executor_concurrency
will be used instead.
tiflash_fastscan New in v6.3.0
- Scope: SESSION | GLOBAL
- Applies to hint SET_VAR: Yes
- Default value:
OFF
- Type: Boolean
- If FastScan is enabled (set to
ON
), TiFlash provides more efficient query performance, but does not guarantee the accuracy of the query results or data consistency.
tiflash_fine_grained_shuffle_batch_size New in v6.2.0
- Scope: SESSION | GLOBAL
- Applies to hint SET_VAR: Yes
- Default value:
8192
- Range:
[1, 18446744073709551615]
- When Fine Grained Shuffle is enabled, the window function pushed down to TiFlash can be executed in parallel. This variable controls the batch size of the data sent by the sender.
- Impact on performance: set a reasonable size according to your business requirements. Improper setting affects the performance. If the value is set too small, for example
1
, it causes one network transfer per Block. If the value is set too large, for example, the total number of rows of the table, it causes the receiving end to spend most of the time waiting for data, and the piplelined computation cannot work. To set a proper value, you can observe the distribution of the number of rows received by the TiFlash receiver. If most threads receive only a few rows, for example a few hundred, you can increase this value to reduce the network overhead.
tiflash_fine_grained_shuffle_stream_count New in v6.2.0
Scope: SESSION | GLOBAL
Persists to cluster: Yes
Applies to hint SET_VAR: Yes
Type: Integer
Default value:
0
Range:
[-1, 1024]
When the window function is pushed down to TiFlash for execution, you can use this variable to control the concurrency level of the window function execution. The possible values are as follows:
- -1: the Fine Grained Shuffle feature is disabled. The window function pushed down to TiFlash is executed in a single thread.
- 0: the Fine Grained Shuffle feature is enabled. If
tidb_max_tiflash_threads
is set to a valid value (greater than 0), thentiflash_fine_grained_shuffle_stream_count
is set to the value oftidb_max_tiflash_threads
. Otherwise, it is automatically estimated based on the CPU resources of the TiFlash compute node. The actual concurrency level of the window function on TiFlash is: min(tiflash_fine_grained_shuffle_stream_count
, the number of physical threads on TiFlash nodes). - Integer greater than 0: the Fine Grained Shuffle feature is enabled. The window function pushed down to TiFlash is executed in multiple threads. The concurrency level is: min(
tiflash_fine_grained_shuffle_stream_count
, the number of physical threads on TiFlash nodes).
Theoretically, the performance of the window function increases linearly with this value. However, if the value exceeds the actual number of physical threads, it instead leads to performance degradation.
tiflash_mem_quota_query_per_node New in v7.4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[-1, 9223372036854775807]
- This variable limits the maximum memory usage for a query on a TiFlash node. When the memory usage of a query exceeds this limit, TiFlash returns an error and terminates the query. Setting this variable to
-1
or0
means no limit. When this variable is set to a value greater than0
andtiflash_query_spill_ratio
is set to a valid value, TiFlash enables query-level spilling.
tiflash_query_spill_ratio New in v7.4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Float
- Default value:
0.7
- Range:
[0, 0.85]
- This variable controls the threshold for TiFlash query-level spilling.
0
means disabling the automatic query-level spilling. When this variable is greater than0
and the memory usage of a query exceedstiflash_mem_quota_query_per_node
*tiflash_query_spill_ratio
, TiFlash triggers query-level spilling, which spills data of supported operators in the query as needed.
tiflash_replica_read New in v7.3.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
all_replicas
- Value options:
all_replicas
,closest_adaptive
, orclosest_replicas
- This variable is used to set the strategy for selecting TiFlash replicas when a query requires the TiFlash engine.
all_replicas
means using all available TiFlash replicas for analytical computing.closest_adaptive
means preferring to use TiFlash replicas in the same zone as the TiDB node initiating the query. If replicas in this zone do not contain all the required data, the query will involve TiFlash replicas from other zones along with their corresponding TiFlash nodes.closest_replicas
means using only TiFlash replicas in the same zone as the TiDB node initiating the query. If replicas in this zone do not contain all the required data, the query will return an error.
tikv_client_read_timeout New in v7.4.0
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
0
- Range:
[0, 2147483647]
- Unit: Millisecond
- You can use
tikv_client_read_timeout
to set the timeout for TiDB to send a TiKV RPC read request in a query. When a TiDB cluster is in an environment with unstable network or serious TiKV I/O latency jitter, and your application is sensitive to the latency of the SQL queries, you can settikv_client_read_timeout
to reduce the timeout of the TiKV RPC read requests. In this case, when a TiKV node has I/O latency jitter, TiDB can time out quickly and re-send the RPC request to the TiKV node where the next TiKV Region Peer is located. If the requests of all TiKV Region Peers time out, TiDB will retry with the default timeout (usually 40 seconds). - You can also use the optimizer hint
/*+ SET_VAR(TIKV_CLIENT_READ_TIMEOUT=N) */
in a query to set the timeout for TiDB to send a TiKV RPC read request. If both the optimizer hint and this system variable are set, the optimizer hint takes higher priority. - The default value
0
indicates that the default timeout (usually 40 seconds) is used.
time_zone
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
SYSTEM
- This variable returns the current time zone. Values can be specified as either an offset such as '-8:00' or a named zone 'America/Los_Angeles'.
- The value
SYSTEM
means that the time zone should be the same as the system host, which is available via thesystem_time_zone
variable.
timestamp
- Scope: SESSION
- Applies to hint SET_VAR: No
- Type: Float
- Default value:
0
- Range:
[0, 2147483647]
- A non-empty value of this variable indicates the UNIX epoch that is used as the timestamp for
CURRENT_TIMESTAMP()
,NOW()
, and other functions. This variable might be used in data restore or replication.
transaction_isolation
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
REPEATABLE-READ
- Possible values:
READ-UNCOMMITTED
,READ-COMMITTED
,REPEATABLE-READ
,SERIALIZABLE
- This variable sets the transaction isolation. TiDB advertises
REPEATABLE-READ
for compatibility with MySQL, but the actual isolation level is Snapshot Isolation. See transaction isolation levels for further details.
tx_isolation
This variable is an alias for transaction_isolation
.
tx_isolation_one_shot
Internally, the TiDB parser transforms the SET TRANSACTION ISOLATION LEVEL [READ COMMITTED| REPEATABLE READ | ...]
statements to SET @@SESSION.TX_ISOLATION_ONE_SHOT = [READ COMMITTED| REPEATABLE READ | ...]
.
tx_read_ts
- Scope: SESSION
- Applies to hint SET_VAR: No
- Default value: ""
- In the Stale Read scenarios, this session variable is used to help record the Stable Read timestamp value.
- This variable is used for the internal operation of TiDB. It is NOT recommended to set this variable.
txn_scope
- Scope: SESSION
- Applies to hint SET_VAR: No
- Default value:
global
- Value options:
global
andlocal
- This variable is used to set whether the current session transaction is a global transaction or a local transaction.
- This variable is used for the internal operation of TiDB. It is NOT recommended to set this variable.
validate_password.check_user_name New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
ON
- Type: Boolean
- This variable is a check item in the password complexity check. It checks whether the password matches the username. This variable takes effect only when
validate_password.enable
is enabled. - When this variable is effective and set to
ON
, if you set a password, TiDB compares the password with the username (excluding the hostname). If the password matches the username, the password is rejected. - This variable is independent of
validate_password.policy
and not affected by the password complexity check level.
validate_password.dictionary New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
""
- Type: String
- This variable is a check item in the password complexity check. It checks whether the password matches the dictionary. This variable takes effect only when
validate_password.enable
is enabled andvalidate_password.policy
is set to2
(STRONG). - This variable is a string not longer than 1024 characters. It contains a list of words that cannot exist in the password. Each word is separated by semicolon (
;
). - This variable is set to an empty string by default, which means no dictionary check is performed. To perform the dictionary check, you need to include the words to be matched in the string. If this variable is configured, when you set a password, TiDB compares each substring (length in 4 to 100 characters) of the password with the words in the dictionary. If any substring of the password matches a word in the dictionary, the password is rejected. The comparison is case-insensitive.
validate_password.enable New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Default value:
OFF
- Type: Boolean
- This variable controls whether to perform password complexity check. If this variable is set to
ON
, TiDB performs the password complexity check when you set a password.
validate_password.length New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
8
- Range:
[0, 2147483647]
for TiDB Self-Hosted and TiDB Dedicated,[8, 2147483647]
for TiDB Serverless - This variable is a check item in the password complexity check. It checks whether the password length is sufficient. By default, the minimum password length is
8
. This variable takes effect only whenvalidate_password.enable
is enabled. - The value of this variable must not be smaller than the expression:
validate_password.number_count + validate_password.special_char_count + (2 * validate_password.mixed_case_count)
. - If you change the value of
validate_password.number_count
,validate_password.special_char_count
, orvalidate_password.mixed_case_count
such that the expression value is larger thanvalidate_password.length
, the value ofvalidate_password.length
is automatically changed to match the expression value.
validate_password.mixed_case_count New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1
- Range:
[0, 2147483647]
for TiDB Self-Hosted and TiDB Dedicated,[1, 2147483647]
for TiDB Serverless - This variable is a check item in the password complexity check. It checks whether the password contains sufficient uppercase and lowercase letters. This variable takes effect only when
validate_password.enable
is enabled andvalidate_password.policy
is set to1
(MEDIUM) or larger. - Neither the number of uppercase letters nor the number of lowercase letters in the password can be fewer than the value of
validate_password.mixed_case_count
. For example, when the variable is set to1
, the password must contain at least one uppercase letter and one lowercase letter.
validate_password.number_count New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1
- Range:
[0, 2147483647]
for TiDB Self-Hosted and TiDB Dedicated,[1, 2147483647]
for TiDB Serverless - This variable is a check item in the password complexity check. It checks whether the password contains sufficient numbers. This variable takes effect only when
validate_password.enable
is enabled andvalidate_password.policy
is set to1
(MEDIUM) or larger.
validate_password.policy New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Enumeration
- Default value:
1
- Value options:
0
,1
, and2
for TiDB Self-Hosted and TiDB Dedicated;1
and2
for TiDB Serverless - This variable controls the policy for the password complexity check. This variable takes effect only when
validate_password.enable
is enabled. The value of this variable determines whether othervalidate-password
variables take effect in the password complexity check, except forvalidate_password.check_user_name
. - This value of this variable can be
0
,1
, or2
(corresponds to LOW, MEDIUM, or STRONG). Different policy levels have different checks:- 0 or LOW: password length.
- 1 or MEDIUM: password length, uppercase and lowercase letters, numbers, and special characters.
- 2 or STRONG: password length, uppercase and lowercase letters, numbers, special characters, and dictionary match.
validate_password.special_char_count New in v6.5.0
- Scope: GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
1
- Range:
[0, 2147483647]
for TiDB Self-Hosted and TiDB Dedicated,[1, 2147483647]
for TiDB Serverless - This variable is a check item in the password complexity check. It checks whether the password contains sufficient special characters. This variable takes effect only when
validate_password.enable
is enabled andvalidate_password.policy
is set to1
(MEDIUM) or larger.
version
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value:
8.0.11-TiDB-
(tidb version) - This variable returns the MySQL version, followed by the TiDB version. For example '8.0.11-TiDB-v8.2.0'.
version_comment
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: (string)
- This variable returns additional details about the TiDB version. For example, 'TiDB Server (Apache License 2.0) Community Edition, MySQL 8.0 compatible'.
version_compile_machine
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: (string)
- This variable returns the name of the CPU architecture on which TiDB is running.
version_compile_os
- Scope: NONE
- Applies to hint SET_VAR: No
- Default value: (string)
- This variable returns the name of the OS on which TiDB is running.
wait_timeout
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Integer
- Default value:
28800
- Range:
[0, 31536000]
- Unit: Seconds
- This variable controls the idle timeout of user sessions. A zero-value means unlimited.
warning_count
- Scope: SESSION
- Applies to hint SET_VAR: No
- Default value:
0
- This read-only variable indicates the number of warnings that occurred in the statement that was previously executed.
windowing_use_high_precision
- Scope: SESSION | GLOBAL
- Persists to cluster: Yes
- Applies to hint SET_VAR: No
- Type: Boolean
- Default value:
ON
- This variable controls whether to use the high precision mode when computing the window functions.