TiDB Cloud
TiDB Self-Managed
Learning Center
Contact Us
​
Sign InStart for Free

Configure TiFlash

This document introduces the configuration parameters related to the deployment and use of TiFlash.

PD scheduling parameters

You can adjust the PD scheduling parameters using pd-ctl. Note that you can use tiup ctl:v<CLUSTER_VERSION> pd to replace pd-ctl -u <pd_ip:pd_port> when using tiup to deploy and manage your cluster.

  • replica-schedule-limit: determines the rate at which the replica-related operator is generated. The parameter affects operations such as making nodes offline and add replicas.

  • store-balance-rate: limits the rate at which Regions of each TiKV/TiFlash store are scheduled. Note that this parameter takes effect only when the stores have newly joined the cluster. If you want to change the setting for existing stores, use the following command.

    • Execute the pd-ctl -u <pd_ip:pd_port> store limit <store_id> <value> command to set the scheduling rate of a specified store. (To get store_id, you can execute the pd-ctl -u <pd_ip:pd_port> store command.
    • If you do not set the scheduling rate for Regions of a specified store, this store inherits the setting of store-balance-rate.
    • You can execute the pd-ctl -u <pd_ip:pd_port> store limit command to view the current setting value of store-balance-rate.

  • replication.location-labels: indicates the topological relationship of TiKV instances. The order of the keys indicates the layering relationship of different labels. If TiFlash is enabled, you need to use pd-ctl config placement-rules to set the default value. For details, see geo-distributed-deployment-topology.

TiFlash configuration parameters

This section introduces the configuration parameters of TiFlash.

Configure the tiflash.toml file

## The listening host for supporting services such as TPC/HTTP. It is recommended to configure it as "0.0.0.0", which means to listen on all IP addresses of this machine.
listen_host = "0.0.0.0"
## The TiFlash TCP service port. This port is used for internal testing and is set to 9000 by default. Before TiFlash v7.1.0, this port is enabled by default with a security risk. To enhance security, it is recommended to apply access control on this port to only allow access from whitelisted IP addresses. Starting from TiFlash v7.1.0, you can avoid the security risk by commenting out the configuration of this port. When the TiFlash configuration file does not specify this port, it will be disabled. 
## It is **NOT** recommended to configure this port in any TiFlash deployment. (Note: Starting from TiFlash v7.1.0, TiFlash deployed by TiUP >= v1.12.5 or TiDB Operator >= v1.5.0 disables the port by default and is more secure.)
# tcp_port = 9000
## The cache size limit of the metadata of a data block. Generally, you do not need to change this value.
mark_cache_size = 1073741824
## The cache size limit of the min-max index of a data block. Generally, you do not need to change this value.
minmax_index_cache_size = 1073741824
## The cache size limit of the DeltaIndex. The default value is 0, which means no limit.
delta_index_cache_size = 0

## The storage path of TiFlash data. If there are multiple directories, separate each directory with a comma.
## path and path_realtime_mode are deprecated since v4.0.9. Use the configurations
## in the [storage] section to get better performance in the multi-disk deployment scenarios
## Since TiDB v5.2.0, if you need to use the storage.io_rate_limit configuration, you need to set the storage path of TiFlash data to storage.main.dir at the same time.
## When the [storage] configurations exist, both path and path_realtime_mode configurations are ignored.
# path = "/tidb-data/tiflash-9000"
## or
# path = "/ssd0/tidb-data/tiflash,/ssd1/tidb-data/tiflash,/ssd2/tidb-data/tiflash"
## The default value is false. If you set it to true and multiple directories
## are set in the path, the latest data is stored in the first directory and older
## data is stored in the rest directories.
# path_realtime_mode = false

## The path in which the TiFlash temporary files are stored. By default it is the first directory in path
## or in storage.latest.dir appended with "/tmp".
# tmp_path = "/tidb-data/tiflash-9000/tmp"

## Storage paths settings take effect starting from v4.0.9
[storage]

    ## DTFile format
    ## * format_version = 2, the default format for versions < v6.0.0.
    ## * format_version = 3, the default format for v6.0.0 and v6.1.x, which provides more data validation features.
    ## * format_version = 4, the default format for versions from v6.2.0 to v7.3.0, which reduces write amplification and background task resource consumption
    ## * format_version = 5, the default format for v7.4.0 and later versions (introduced in v7.3.0), which reduces the number of physical files by merging smaller files. 
    # format_version = 5

    [storage.main]
    ## The list of directories to store the main data. More than 90% of the total data is stored in
    ## the directory list.
    dir = [ "/tidb-data/tiflash-9000" ]
    ## or
    # dir = [ "/ssd0/tidb-data/tiflash", "/ssd1/tidb-data/tiflash" ]

    ## The maximum storage capacity of each directory in storage.main.dir.
    ## If it is not set, or is set to multiple 0, the actual disk (the disk where the directory is located) capacity is used.
    ## Note that human-readable numbers such as "10GB" are not supported yet.
    ## Numbers are specified in bytes.
    ## The size of the capacity list should be the same with the dir size.
    ## For example:
    # capacity = [ 10737418240, 10737418240 ]

    [storage.latest]
    ## The list of directories to store the latest data. About 10% of the total data is stored in
    ## the directory list. The directories (or directory) listed here require higher IOPS
    ## metrics than those in storage.main.dir.
    ## If it is not set (by default), the values of storage.main.dir are used.
    # dir = [ ]
    ## The maximum storage capacity of each directory in storage.latest.dir.
    ## If it is not set, or is set to multiple 0, the actual disk (the disk where the directory is located) capacity is used.
    # capacity = [ 10737418240, 10737418240 ]

    ## [storage.io_rate_limit] settings are new in v5.2.0.
    [storage.io_rate_limit]
    ## This configuration item determines whether to limit the I/O traffic, which is disabled by default. This traffic limit in TiFlash is suitable for cloud storage that has the disk bandwidth of a small and specific size.
    ## The total I/O bandwidth for disk reads and writes. The unit is bytes and the default value is 0, which means the I/O traffic is not limited by default.
    # max_bytes_per_sec = 0
    ## max_read_bytes_per_sec and max_write_bytes_per_sec have similar meanings to max_bytes_per_sec. max_read_bytes_per_sec means the total I/O bandwidth for disk reads, and max_write_bytes_per_sec means the total I/O bandwidth for disk writes.
    ## These configuration items limit I/O bandwidth for disk reads and writes separately. You can use them for cloud storage that calculates the limit of I/O bandwidth for disk reads and writes separately, such as the Persistent Disk provided by Google Cloud.
    ## When the value of max_bytes_per_sec is not 0, max_bytes_per_sec is prioritized.
    # max_read_bytes_per_sec = 0
    # max_write_bytes_per_sec = 0

    ## The following parameters control the bandwidth weights assigned to different I/O traffic types. Generally, you do not need to adjust these parameters.
    ## TiFlash internally divides I/O requests into four types: foreground writes, background writes, foreground reads, background reads.
    ## When the I/O traffic limit is initialized, TiFlash assigns the bandwidth according to the following weight ratio.
    ## The following  default configurations indicate that each type of traffic gets a weight of 25% (25 / (25 + 25 + 25 + 25) = 25%).
    ## If the weight is configured to 0, the corresponding I/O traffic is not limited.
    # foreground_write_weight = 25
    # background_write_weight = 25
    # foreground_read_weight = 25
    # background_read_weight = 25
    ## TiFlash supports automatically tuning the traffic limit for different I/O types according to the current I/O load. Sometimes, the tuned bandwidth might exceed the weight ratio set above.
    ## auto_tune_sec indicates the interval of automatic tuning. The unit is seconds. If the value of auto_tune_sec is 0, the automatic tuning is disabled.
    # auto_tune_sec = 5

    ## The following configuration items only take effect for the TiFlash disaggregated storage and compute architecture mode. For details, see documentation at https://docs.pingcap.com/tidb/dev/tiflash-disaggregated-and-s3.
    # [storage.s3]
    # endpoint: http://s3.{region}.amazonaws.com # S3 endpoint address
    # bucket: mybucket                           # TiFlash stores all data in this bucket
    # root: /cluster1_data                       # Root directory where data is stored in the S3 bucket
    # access_key_id: {ACCESS_KEY_ID}             # Access S3 with ACCESS_KEY_ID
    # secret_access_key: {SECRET_ACCESS_KEY}     # Access S3 with SECRET_ACCESS_KEY
    # [storage.remote.cache]
    # dir: /data1/tiflash/cache        # Local data cache directory of the Compute Node
    # capacity: 858993459200           # 800 GiB

[flash]
    ## The listening address of TiFlash coprocessor services.
    service_addr = "0.0.0.0:3930"

    ## Introduced in v7.4.0. When the gap between the `applied_index` advanced by the current Raft state machine and the `applied_index` at the last disk spilling exceeds `compact_log_min_gap`, TiFlash executes the `CompactLog` command from TiKV and spills data to disk. Increasing this gap might reduce the disk spilling frequency of TiFlash, thus reducing read latency in random write scenarios, but it might also increase memory overhead. Decreasing this gap might increase the disk spilling frequency of TiFlash, thus alleviating memory pressure in TiFlash. However, at this stage, the disk spilling frequency of TiFlash will not be higher than that of TiKV, even if this gap is set to 0.
    ## It is recommended to keep the default value.
    # compact_log_min_gap = 200
    ## Introduced in v5.0. When the number or the size of rows in the Regions cached by TiFlash exceeds either of the following thresholds, TiFlash executes the `CompactLog` command from TiKV and spills data to disk.
    ## It is recommended to keep the default value.
    # compact_log_min_rows = 40960 # 40k
    # compact_log_min_bytes = 33554432 # 32MB

    ## The following configuration item only takes effect for the TiFlash disaggregated storage and compute architecture mode. For details, see documentation at https://docs.pingcap.com/tidb/dev/tiflash-disaggregated-and-s3.
    # disaggregated_mode = tiflash_write # The supported mode is `tiflash_write` or `tiflash_compute.

[flash.proxy]
    ## The listening address of proxy. If it is left empty, 127.0.0.1:20170 is used by default.
    addr = "127.0.0.1:20170"
    ## The external access address of addr. If it is left empty, "addr" is used by default.
    ## Should guarantee that other nodes can access through `advertise-addr` when you deploy the cluster on multiple nodes.
    advertise-addr = ""
    ## The listening address from which the proxy pulls metrics or status information. If it is left empty, 127.0.0.1:20292 is used by default.
    status-addr = "127.0.0.1:20292"
    ## The external access address of status-addr. If it is left empty, the value of "status-addr" is used by default.
    ## Should guarantee that other nodes can access through `advertise-status-addr` when you deploy the cluster on multiple nodes.
    advertise-status-addr = ""
    ## The data storage path of proxy.
    data-dir = "/tidb-data/tiflash-9000/flash"
    ## The configuration file path of proxy.
    config = "/tidb-deploy/tiflash-9000/conf/tiflash-learner.toml"
    ## The log path of proxy.
    log-file = "/tidb-deploy/tiflash-9000/log/tiflash_tikv.log"
    ## The log level of proxy (available options: "trace", "debug", "info", "warn", "error"). The default value is "info"
    # log-level = "info" 

[logger]
    ## log level (available options: "trace", "debug", "info", "warn", "error"). The default value is "info".
    level = "info"
    log = "/tidb-deploy/tiflash-9000/log/tiflash.log"
    errorlog = "/tidb-deploy/tiflash-9000/log/tiflash_error.log"
    ## Size of a single log file. The default value is "100M".
    size = "100M"
    ## Maximum number of log files to save. The default value is 10.
    count = 10

[raft]
    ## PD service address. Multiple addresses are separated with commas.
    pd_addr = "10.0.1.11:2379,10.0.1.12:2379,10.0.1.13:2379"

[status]
    ## The port through which Prometheus pulls metrics information. The default value is 8234.
    metrics_port = 8234

[profiles]

[profiles.default]
    ## The default value is false. This parameter determines whether the segment
    ## of DeltaTree Storage Engine uses logical split.
    ## Using the logical split can reduce the write amplification.
    ## However, these are at the cost of disk space waste.
    ## It is strongly recommended to keep the default value `false` and
    ## not to change it to `true` in v6.2.0 and later versions. For details,
    ## see known issue [#5576](https://github.com/pingcap/tiflash/issues/5576).
    # dt_enable_logical_split = false

    ## `max_threads` indicates the internal thread concurrency when TiFlash executes an MPP task.
    ## The default value is 0. When it is set to 0,
    ## TiFlash uses the number of CPU cores as the execution concurrency.
    ## This parameter only takes effect
    ## when the system variable `tidb_max_tiflash_threads` is set to -1.
    max_threads = 0
    
    ## The memory usage limit for the generated intermediate data in a single query.
    ## When the value is an integer, the unit is byte. For example, 34359738368 means 32 GiB of memory limit, and 0 means no limit.
    ## When the value is a floating-point number in the range of [0.0, 1.0), it means the ratio of the allowed memory usage to the total memory of the node. For example, 0.8 means 80% of the total memory, and 0.0 means no limit.
    ## The default value is 0, which means no limit.
    ## When a query attempts to consume memory that exceeds this limit, the query is terminated and an error is reported.
    max_memory_usage = 0

    ## The memory usage limit for the generated intermediate data in all queries.
    ## When the value is an integer, the unit is byte. For example, 34359738368 means 32 GiB of memory limit, and 0 means no limit.
    ## When the value is a floating-point number in the range of [0.0, 1.0), it means the ratio of the allowed memory usage to the total memory of the node. For example, 0.8 means 80% of the total memory, and 0.0 means no limit.
    ## The default value is 0.8, which means 80% of the total memory.
    ## When the queries attempt to consume memory that exceeds this limit, the queries are terminated and an error is reported.
    max_memory_usage_for_all_queries = 0.8

    ## New in v5.0. This item specifies the maximum number of cop requests that TiFlash Coprocessor executes at the same time. If the number of requests exceeds the specified value, the exceeded requests will queue. If the configuration value is set to 0 or not set, the default value is used, which is twice the number of physical cores.
    cop_pool_size = 0
    ## New in v5.0. This item specifies the maximum number of batch requests that TiFlash Coprocessor executes at the same time. If the number of requests exceeds the specified value, the exceeded requests will queue. If the configuration value is set to 0 or not set, the default value is used, which is twice the number of physical cores.
    batch_cop_pool_size = 0
    ## New in v6.1.0. This item specifies the number of requests that TiFlash can concurrently process when it receives ALTER TABLE ... COMPACT from TiDB.
    ## If the value is set to 0, the default value 1 prevails.
    manual_compact_pool_size = 1
    ## New in v5.4.0. This item enables or disables the elastic thread pool feature, which significantly improves CPU utilization in high concurrency scenarios of TiFlash. The default value is true.
    enable_elastic_threadpool = true
    ## Compression algorithm of the TiFlash storage engine. The value can be LZ4, zstd, or LZ4HC, and is case-insensitive. By default, LZ4 is used.
    dt_compression_method = "LZ4"
    ## Compression level of the TiFlash storage engine. The default value is 1.
    ## It is recommended that you set this value to 1 if dt_compression_method is LZ4.
    ## It is recommended that you set this value to -1 (smaller compression rate, but better read performance) or 1 if dt_compression_method is zstd.
    ## It is recommended that you set this value to 9 if dt_compression_method is LZ4HC.
    dt_compression_level = 1

    ## New in v6.2.0. This item specifies the minimum ratio of valid data in a PageStorage data file. When the ratio of valid data in a PageStorage data file is less than the value of this configuration, GC is triggered to compact data in the file. The default value is 0.5.
    dt_page_gc_threshold = 0.5

    ## New in v7.0.0. This item specifies the maximum memory available for the HashAggregation operator with group by key before a disk spill is triggered. When the memory usage exceeds the threshold, HashAggregation reduces memory usage by spilling to disk. This item defaults to 0, which means that the memory usage is unlimited and spill to disk is never used for HashAggregation.
    max_bytes_before_external_group_by = 0

    ## New in v7.0.0. This item specifies the maximum memory available for the sort or topN operator before a disk spill is triggered. When the memory usage exceeds the threshold, the sort or topN operator reduces memory usage by spilling to disk. This item defaults to 0, which means that the memory usage is unlimited and spill to disk is never used for sort or topN.
    max_bytes_before_external_sort = 0

    ## New in v7.0.0. This item specifies the maximum memory available for the HashJoin operator with EquiJoin before a disk spill is triggered. When the memory usage exceeds the threshold, HashJoin reduces memory usage by spilling to disk. This item defaults to 0, which means that the memory usage is unlimited and spill to disk is never used for HashJoin with EquiJoin.
    max_bytes_before_external_join = 0

    ## New in v7.4.0. This item controls whether to enable the TiFlash resource control feature. When it is set to true, TiFlash uses the pipeline execution model.
    enable_resource_control = true

    ## New in v6.0.0. This item is used for the MinTSO scheduler. It specifies the maximum number of threads that one resource group can use. The default value is 5000. For details about the MinTSO scheduler, see https://docs.pingcap.com/tidb/v8.2/tiflash-mintso-scheduler.
    task_scheduler_thread_soft_limit = 5000

    ## New in v6.0.0. This item is used for the MinTSO scheduler. It specifies the maximum number of threads in the global scope. The default value is 10000. For details about the MinTSO scheduler, see https://docs.pingcap.com/tidb/v8.2/tiflash-mintso-scheduler.
    task_scheduler_thread_hard_limit = 10000

    ## New in v6.4.0. This item is used for the MinTSO scheduler. It specifies the maximum number of queries that can run simultaneously in a TiFlash instance. The default value is 0, which means twice the number of vCPUs. For details about the MinTSO scheduler, see https://docs.pingcap.com/tidb/v8.2/tiflash-mintso-scheduler.
    task_scheduler_active_set_soft_limit = 0

## Security settings take effect starting from v4.0.5.
[security]
    ## New in v5.0. This configuration item enables or disables log redaction. Value options: true, false, marker. The marker option is introduced in v8.2.0.
    ## The default value is false, which means that log redaction is disabled.
    ## If the configuration item is set to true, all user data in the log is replaced by `?`.
    ## If the configuration item is set to marker, all user data in the log is wrapped in `‹ ›`. If user data contains `‹` or `›`, `‹` is escaped as `‹‹`, and `›` is escaped as `››`. Based on the marked logs, you can decide whether to desensitize the marked information when the logs are displayed.
    ## Note that you also need to set security.redact-info-log for tiflash-learner's logging in tiflash-learner.toml.
    # redact_info_log = false

    ## Path of the file that contains a list of trusted SSL CAs. If set, the following settings
    ## cert_path and key_path are also needed.
    # ca_path = "/path/to/ca.pem"
    ## Path of the file that contains X509 certificate in PEM format.
    # cert_path = "/path/to/tiflash-server.pem"
    ## Path of the file that contains X509 key in PEM format.
    # key_path = "/path/to/tiflash-server-key.pem"

Configure the tiflash-learner.toml file

[server]
    engine-addr = The external access address of the TiFlash coprocessor service.
[raftstore]
    ## The allowable number of threads in the pool that flushes Raft data to storage.
    apply-pool-size = 4

    ## The allowable number of threads that process Raft, which is the size of the Raftstore thread pool.
    store-pool-size = 4

    ## The number of threads that handle snapshots.
    ## The default number is 2.
    ## If you set it to 0, the multi-thread optimization is disabled.
    snap-handle-pool-size = 2

    ## The shortest interval at which Raft store persists WAL.
    ## You can properly increase the latency to reduce IOPS usage.
    ## The default value is "4ms".
    ## If you set it to 0ms, the optimization is disabled.
    store-batch-retry-recv-timeout = "4ms"
[security]
    ## New in v5.0. This configuration item enables or disables log redaction. Value options: true, false.
    ## The default value is false, which means that log redaction is disabled.
    ## If the configuration item is set to true, all user data in the log is replaced by `?`.
    redact-info-log = false

[security.encryption]
    ## The encryption method for data files.
    ## Value options: "aes128-ctr", "aes192-ctr", "aes256-ctr", "sm4-ctr" (supported since v6.4.0), and "plaintext".
    ## Default value: `"plaintext"`, which means encryption is disabled by default. A value other than "plaintext" means that encryption is enabled, in which case the master key must be specified.
    data-encryption-method = "aes128-ctr"
    ## Specifies how often the data encryption key is rotated. Default value: `7d`.
    data-key-rotation-period = "168h" # 7 days

[security.encryption.master-key]
    ## Specifies the master key if encryption is enabled. To learn how to configure a master key, see Configure encryption: https://docs.pingcap.com/tidb/dev/encryption-at-rest#configure-encryption .

[security.encryption.previous-master-key]
    ## Specifies the old master key when rotating the new master key. The configuration format is the same as that of `master-key`. To learn how to configure a master key, see  Configure encryption: https://docs.pingcap.com/tidb/dev/encryption-at-rest#configure-encryption .

In addition to the items above, other parameters are the same as those of TiKV. Note that the label whose key is engine is reserved and cannot be configured manually.

Schedule replicas by topology labels

See Set available zones.

Multi-disk deployment

TiFlash supports multi-disk deployment. If there are multiple disks in your TiFlash node, you can make full use of those disks by configuring the parameters described in the following sections. For TiFlash's configuration template to be used for TiUP, see The complex template for the TiFlash topology.

Multi-disk deployment with TiDB version earlier than v4.0.9

For TiDB clusters earlier than v4.0.9, TiFlash only supports storing the main data of the storage engine on multiple disks. You can set up a TiFlash node on multiple disks by specifying the path (data_dir in TiUP) and path_realtime_mode configuration.

If there are multiple data storage directories in path, separate each with a comma. For example, /nvme_ssd_a/data/tiflash,/sata_ssd_b/data/tiflash,/sata_ssd_c/data/tiflash. If there are multiple disks in your environment, it is recommended that each directory corresponds to one disk and you put disks with the best performance at the front to maximize the performance of all disks.

If there are multiple disks with similar I/O metrics on your TiFlash node, you can leave the path_realtime_mode parameter to the default value (or you can explicitly set it to false). It means that data will be evenly distributed among all storage directories. However, the latest data is written only to the first directory, so the corresponding disk is busier than other disks.

If there are multiple disks with different I/O metrics on your TiFlash node, it is recommended to set path_realtime_mode to true and put disks with the best I/O metrics at the front of path. It means that the first directory only stores the latest data, and the older data are evenly distributed among the other directories. Note that in this case, the capacity of the first directory should be planned as 10% of the total capacity of all directories.

Multi-disk deployment with TiDB v4.0.9 or later

For TiDB clusters with v4.0.9 or later versions, TiFlash supports storing the main data and the latest data of the storage engine on multiple disks. If you want to deploy a TiFlash node on multiple disks, it is recommended to specify your storage directories in the [storage] section to make full use of your node. Note that the configurations earlier than v4.0.9 (path and path_realtime_mode) are still supported.

If there are multiple disks with similar I/O metrics on your TiFlash node, it is recommended to specify corresponding directories in the storage.main.dir list and leave storage.latest.dir empty. TiFlash will distribute I/O pressure and data among all directories.

If there are multiple disks with different I/O metrics on your TiFlash node, it is recommended to specify directories with higher metrics in the storage.latest.dir list, and specify directories with lower metrics in the storage.main.dir list. For example, for one NVMe-SSD and two SATA-SSDs, you can set storage.latest.dir to ["/nvme_ssd_a/data/tiflash"] and storage.main.dir to ["/sata_ssd_b/data/tiflash", "/sata_ssd_c/data/tiflash"]. TiFlash will distribute I/O pressure and data among these two directories list respectively. Note that in this case, the capacity of storage.latest.dir should be planned as 10% of the total planned capacity.

Was this page helpful?

Download PDFRequest docs changesAsk the community