Sign InTry Free

Data Migration Relay Log

The Data Migration (DM) relay log consists of several sets of numbered files containing events that describe database changes, and an index file that contains the names of all used relay log files.

After relay log is enabled, DM-worker automatically migrates the upstream binlog to the local configuration directory (the default migration directory is <deploy_dir>/<relay_log> if DM is deployed using TiUP). The default value of <relay_log> is relay-dir and can be modified in Upstream Database Configuration File. Since v5.4.0, you can configure the local configuration directory through relay-dir in the DM-worker configuration file, which takes precedence over the configuration file of the upstream database.

User scenarios

In MySQL, storage space is limited, so the binlog is automatically purged when the maximum retention time is reached. After the upstream database purges the binlog, DM fails to pull the purged binlog and the migration task fails. For each migration task, DM creates a connection in the upstream to pull binlog. Too many connections might cause a heavy workload on the upstream database.

When the relay log is enabled, multiple migration task with the same upstream database can reuse the relay log that has been pulled to the local disk. This relieves the pressure on the upstream database.

For full and incremental data migration tasks (task-mode=all), DM needs to first migrate full data and then perform incremental migration based on binlog. If the full migration phase takes long, the upstream binlog might be purged, which results in incremental migration failure. To avoid this situation, you can enable the relay log feature so that DM automatically retains enough log in the local disk and ensures the incremental migration task can be performed normally.

It is generally recommended to enable relay log, but be aware of the following potential issue:

Because relay log must be written to the disk, it consumes external IO and CPU resources. This prolongs the whole data replication process and increases the data replication latency. For latency-sensitive scenarios, it is not recommended to enable relay log.

Use relay log

This section describes how to enable and disable relay log, query relay log status, and purge relay log.

Enable and disable relay log

  • v5.4.0 and later versions
  • versions between v2.0.2 (included) and v5.3.0 (included)
  • earlier than v2.0.2

In v5.4.0 and later versions, you can enable relay log by setting enable-relay to true. Since v5.4.0, when binding the upstream data source, DM-worker checks the enable-relay item in the configuration of the data source. If enable-relay is true, the relay log feature is enabled for this data source.

For the detailed configuration method, see Upstream Database Configuration File.

In addition, you can also dynamically adjust the enable-relay configuration of the data source using the start-relay or stop-relay command to enable or disable relay log in time.

start-relay -s mysql-replica-01
{ "result": true, "msg": "" }

In the command start-relay, you can configure one or more DM-workers to migrate relay logs for the specified data source, but the DM-workers specified in the parameter must be free or have been bound to the upstream data source. Examples are as follows:

start-relay -s mysql-replica-01 worker1 worker2
{ "result": true, "msg": "" }
stop-relay -s mysql-replica-01 worker1 worker2
{ "result": true, "msg": "" }

In DM versions earlier than v2.0.2 (not including v2.0.2), DM checks the configuration item enable-relay in the source configuration file when binding a DM-worker to an upstream data source. If enable-relay is set to true, DM enables the relay log feature for the data source.

See Upstream Database Configuration File for how to set the configuration item enable-relay.

Query relay log status

You can use the command query-status -s to query the status of the relay log:

query-status -s mysql-replica-01
Expected output
{ "result": true, "msg": "", "sources": [ { "result": true, "msg": "no sub task started", "sourceStatus": { "source": "mysql-replica-01", "worker": "worker2", "result": null, "relayStatus": { "masterBinlog": "(mysql-bin.000005, 916)", "masterBinlogGtid": "09bec856-ba95-11ea-850a-58f2b4af5188:1-28", "relaySubDir": "09bec856-ba95-11ea-850a-58f2b4af5188.000001", "relayBinlog": "(mysql-bin.000005, 4)", "relayBinlogGtid": "09bec856-ba95-11ea-850a-58f2b4af5188:1-28", "relayCatchUpMaster": false, "stage": "Running", "result": null } }, "subTaskStatus": [ ] }, { "result": true, "msg": "no sub task started", "sourceStatus": { "source": "mysql-replica-01", "worker": "worker1", "result": null, "relayStatus": { "masterBinlog": "(mysql-bin.000005, 916)", "masterBinlogGtid": "09bec856-ba95-11ea-850a-58f2b4af5188:1-28", "relaySubDir": "09bec856-ba95-11ea-850a-58f2b4af5188.000001", "relayBinlog": "(mysql-bin.000005, 916)", "relayBinlogGtid": "", "relayCatchUpMaster": true, "stage": "Running", "result": null } }, "subTaskStatus": [ ] } ] }

Pause and resume relay log

You can use the command pause-relay to pause the pulling process of relay logs and use the command resume-relay to resume the process. You need to specify the source-id of the upstream data source when executing these two commands. See the following examples:

pause-relay -s mysql-replica-01 -s mysql-replica-02
Expected output
{ "op": "PauseRelay", "result": true, "msg": "", "sources": [ { "result": true, "msg": "", "source": "mysql-replica-01", "worker": "worker1" }, { "result": true, "msg": "", "source": "mysql-replica-02", "worker": "worker2" } ] }
resume-relay -s mysql-replica-01
Expected output
{ "op": "ResumeRelay", "result": true, "msg": "", "sources": [ { "result": true, "msg": "", "source": "mysql-replica-01", "worker": "worker1" } ] }

Purge relay logs

DM provides two ways to purge relay logs: manual purge and automatic purge. Neither of these two methods purges active relay logs.

Automatic purge

You can enable automatic purge and configure its strategy in the source configuration file. See the following example:

# relay log purge strategy purge: interval: 3600 expires: 24 remain-space: 15
  • purge.interval

    • The interval of automatic purge in the background, in seconds.
    • "3600" by default, indicating a background purge task is performed every 3600 seconds.
  • purge.expires

    • The number of hours for which the relay log (that has been previously written to the relay processing unit, and that is not being used or will not be read later by the currently running data migration task) can be retained before being purged in the automatic background purge.
    • "0" by default, indicating data purge is not performed according to the update time of the relay log.
  • purge.remain-space

    • The amount of remaining disk space in GB less than which the specified DM-worker machine tries to purge the relay log that can be purged securely in the automatic background purge. If it is set to 0, data purge is not performed according to the remaining disk space.
    • "15" by default, indicating when the available disk space is less than 15 GB, DM-master tries to purge the relay log securely.

Manual purge

Manual purge means using the purge-relay command provided by dmctl to specify subdir and the binlog name thus to purge all the relay logs before the specified binlog. If the -subdir option in the command is not specified, all relay logs before the current relay log sub-directory are purged.

Assuming that the directory structure of the current relay log is as follows:

$ tree . . |-- deb76a2b-09cc-11e9-9129-5242cf3bb246.000001 | |-- mysql-bin.000001 | |-- mysql-bin.000002 | |-- mysql-bin.000003 | `-- relay.meta |-- deb76a2b-09cc-11e9-9129-5242cf3bb246.000003 | |-- mysql-bin.000001 | `-- relay.meta |-- e4e0e8ab-09cc-11e9-9220-82cc35207219.000002 | |-- mysql-bin.000001 | `-- relay.meta `-- server-uuid.index $ cat server-uuid.index deb76a2b-09cc-11e9-9129-5242cf3bb246.000001 e4e0e8ab-09cc-11e9-9220-82cc35207219.000002 deb76a2b-09cc-11e9-9129-5242cf3bb246.000003
  • Executing the following purge-relay command in dmctl purges all relay log files before e4e0e8ab-09cc-11e9-9220-82cc35207219.000002/mysql-bin.000001, which are all relay log files in deb76a2b-09cc-11e9-9129-5242cf3bb246.000001. Files in e4e0e8ab-09cc-11e9-9220-82cc35207219.000002 and deb76a2b-09cc-11e9-9129-5242cf3bb246.000003 are retained.

    purge-relay -s mysql-replica-01 --filename mysql-bin.000001 --sub-dir e4e0e8ab-09cc-11e9-9220-82cc35207219.000002
  • Executing the following purge-relay command in dmctl purges all relay log files before the current (deb76a2b-09cc-11e9-9129-5242cf3bb246.000003) directory's mysql-bin.000001, which are all relay log files in deb76a2b-09cc-11e9-9129-5242cf3bb246.000001 and e4e0e8ab-09cc-11e9-9220-82cc35207219.000002. Files in deb76a2b-09cc-11e9-9129-5242cf3bb246.000003 are retained.

    purge-relay -s mysql-replica-01 --filename mysql-bin.000001

Internal mechanism of relay log

This section introduces the internal mechanism of relay log.

Directory structure

An example of the directory structure of the local storage for a relay log:

// |-- 7e427cc0-091c-11e9-9e45-72b7c59d52d7.000001 | |-- mysql-bin.000001 | |-- mysql-bin.000002 | |-- mysql-bin.000003 | |-- mysql-bin.000004 | `-- relay.meta |-- 842965eb-091c-11e9-9e45-9a3bff03fa39.000002 | |-- mysql-bin.000001 | `-- relay.meta `-- server-uuid.index
  • subdir:

    • DM-worker stores the binlog migrated from the upstream database in the same directory. Each directory is a subdir.

    • subdir is named in the format of <Upstream database UUID>.<Local subdir serial number>.

    • After a switch between primary and secondary instances in the upstream, DM-worker generates a new subdir directory with an incremental serial number.

    • In the above example, for the 7e427cc0-091c-11e9-9e45-72b7c59d52d7.000001 directory, 7e427cc0-091c-11e9-9e45-72b7c59d52d7 is the upstream database UUID and 000001 is the local subdir serial number.

  • server-uuid.index: records a list of the currently available subdir directories.

  • relay.meta: stores the information of the migrated binlog in each subdir. For example,

    cat c0149e17-dff1-11e8-b6a8-0242ac110004.000001/relay.meta
    binlog-name = "mysql-bin.000010" # The name of the currently migrated binlog. binlog-pos = 63083620 # The position of the currently migrated binlog. binlog-gtid = "c0149e17-dff1-11e8-b6a8-0242ac110004:1-3328" # GTID of the currently migrated binlog.

    There might also be multiple GTIDs:

    cat 92acbd8a-c844-11e7-94a1-1866daf8accc.000001/relay.meta
    binlog-name = "mysql-bin.018393" binlog-pos = 277987307 binlog-gtid = "3ccc475b-2343-11e7-be21-6c0b84d59f30:1-14,406a3f61-690d-11e7-87c5-6c92bf46f384:1-94321383,53bfca22-690d-11e7-8a62-18ded7a37b78:1-495,686e1ab6-c47e-11e7-a42c-6c92bf46f384:1-34981190,03fc0263-28c7-11e7-a653-6c0b84d59f30:1-7041423,05474d3c-28c7-11e7-8352-203db246dd3d:1-170,10b039fc-c843-11e7-8f6a-1866daf8d810:1-308290454"

The position where DM receives the binlog

  • DM obtains the earliest position that each migration task needs from the saved checkpoint (in the downstream dm_meta schema by default). If this position is later than any of the following positions, DM starts to migrate from this position.

  • If the local relay log is valid, which means that the relay log contains valid server-uuid.index, subdir, and relay.meta files, DM-worker recovers the migration from the position recorded in relay.meta.

  • If there is no valid local relay log, but the upstream data source configuration file specifies relay-binlog-name or relay-binlog-gtid:

    • In non-GTID mode, if relay-binlog-name is specified, DM-worker starts to migrate from the specified binlog file.
    • In GTID mode, if relay-binlog-gtid is specified, DM-worker starts to migrate from the specified GTID.
  • If there is no valid local relay log and the relay-binlog-name or relay-binlog-gtid is not specified in the DM configuration file:

    • In non-GTID mode, DM-worker starts to migrate from the earliest binlog that each subtask is migrating, until the latest binlog is migrated.

    • In GTID mode, DM-worker starts to migrate from the earliest GTID that each subtask is migrating, until the latest GTID is migrated.

Was this page helpful?

Download PDFRequest docs changesAsk questions on Discord
Playground
New
One-stop & interactive experience of TiDB's capabilities WITHOUT registration.
Products
TiDB
TiDB Dedicated
TiDB Serverless
Pricing
Get Demo
Get Started
© 2024 PingCAP. All Rights Reserved.
Privacy Policy.