跨数据中心部署拓扑

本文以典型的两地三中心为例,介绍跨数据中心部署的拓扑以及关键参数。本文示例所涉及的城市是上海(即 sha)和北京(即 bjabjb)。

拓扑信息

实例个数物理机配置BJ IPSH IP配置
TiDB516 VCore 32GB * 110.0.1.1
10.0.1.2
10.0.1.3
10.0.1.4
10.0.1.5默认端口
全局目录配置
PD54 VCore 8GB * 110.0.1.6
10.0.1.7
10.0.1.8
10.0.1.9
10.0.1.10默认端口
全局目录配置
TiKV516 VCore 32GB 4TB (nvme ssd) * 110.0.1.11
10.0.1.12
10.0.1.13
10.0.1.14
10.0.1.15默认端口
全局目录配置
Monitoring & Grafana14 VCore 8GB * 1 500GB (ssd)10.0.1.16默认端口
全局目录配置

拓扑模版

跨机房配置模板
# Tip: PD priority needs to be manually set using the PD-ctl client tool. such as, member Leader_priority PD-name numbers. # Global variables are applied to all deployments and used as the default value of # the deployments if a specific deployment value is missing. # # Abbreviations used in this example: # sh: Shanghai Zone # bj: Beijing Zone # sha: Shanghai Datacenter A # bja: Beijing Datacenter A # bjb: Beijing Datacenter B global: user: "tidb" ssh_port: 22 deploy_dir: "/tidb-deploy" data_dir: "/tidb-data" monitored: node_exporter_port: 9100 blackbox_exporter_port: 9115 deploy_dir: "/tidb-deploy/monitored-9100" server_configs: tidb: log.level: debug log.slow-query-file: tidb-slow.log tikv: server.grpc-compression-type: gzip readpool.storage.use-unified-pool: true readpool.storage.low-concurrency: 8 pd: replication.location-labels: ["zone","dc","rack","host"] replication.max-replicas: 5 label-property: # TiDB 5.2 及以上版本默认不支持 label-property 配置。若要设置副本策略,请使用 Placement Rules。 reject-leader: - key: "dc" value: "sha" pd_servers: - host: 10.0.1.6 - host: 10.0.1.7 - host: 10.0.1.8 - host: 10.0.1.9 - host: 10.0.1.10 tidb_servers: - host: 10.0.1.1 - host: 10.0.1.2 - host: 10.0.1.3 - host: 10.0.1.4 - host: 10.0.1.5 tikv_servers: - host: 10.0.1.11 ssh_port: 22 port: 20160 status_port: 20180 deploy_dir: "/tidb-deploy/tikv-20160" data_dir: "/tidb-data/tikv-20160" config: server.labels: zone: bj dc: bja rack: rack1 host: host1 - host: 10.0.1.12 ssh_port: 22 port: 20161 status_port: 20181 deploy_dir: "/tidb-deploy/tikv-20161" data_dir: "/tidb-data/tikv-20161" config: server.labels: zone: bj dc: bja rack: rack1 host: host2 - host: 10.0.1.13 ssh_port: 22 port: 20160 status_port: 20180 deploy_dir: "/tidb-deploy/tikv-20160" data_dir: "/tidb-data/tikv-20160" config: server.labels: zone: bj dc: bjb rack: rack1 host: host1 - host: 10.0.1.14 ssh_port: 22 port: 20161 status_port: 20181 deploy_dir: "/tidb-deploy/tikv-20161" data_dir: "/tidb-data/tikv-20161" config: server.labels: zone: bj dc: bjb rack: rack1 host: host2 - host: 10.0.1.15 ssh_port: 22 port: 20160 deploy_dir: "/tidb-deploy/tikv-20160" data_dir: "/tidb-data/tikv-20160" config: server.labels: zone: sh dc: sha rack: rack1 host: host1 readpool.storage.use-unified-pool: true readpool.storage.low-concurrency: 10 raftstore.raft-min-election-timeout-ticks: 50 raftstore.raft-max-election-timeout-ticks: 60 monitoring_servers: - host: 10.0.1.16 grafana_servers: - host: 10.0.1.16

以上 TiDB 集群拓扑文件中,详细的配置项说明见通过 TiUP 部署 TiDB 集群的拓扑文件配置

关键参数配置

本节介绍跨数据中心部署 TiDB 集群的关键参数配置。

TiKV 参数

  • 设置 gRPC 的压缩格式,默认为 none。为提高跨机房部署场景的目标节点间 gRPC 包的传输速度,建议设置为 gzip 格式。

    server.grpc-compression-type: gzip
  • label 配置

    由于采用跨机房部署 TiKV,为了避免物理机宕机导致 Raft Group 默认的 5 副本中丢失 3 副本,使集群不可用的问题,可以通过 label 来实现 PD 智能调度,保证同中心、同机柜、同机器 TiKV 实例不会出现 Raft Group 有 3 副本的情况。

  • TiKV 配置

    相同物理机配置相同的 host 级别 label 信息:

    config: server.labels: zone: bj dc: bja rack: rack1 host: host2
  • 防止异地 TiKV 节点发起不必要的 Raft 选举,需要将异地 TiKV 节点发起选举时经过最少的 tick 个数和最多经过的 tick 个数都调大,这两个参数默认设置均为 0

    raftstore.raft-min-election-timeout-ticks: 50 raftstore.raft-max-election-timeout-ticks: 60

注意:

通过 raftstore.raft-min-election-timeout-ticksraftstore.raft-max-election-timeout-ticks 为 TiKV 节点配置较大的 election timeout tick 可以大幅降低该节点上的 Region 成为 Leader 的概率。但在发生灾难的场景中,如果部分 TiKV 节点宕机,而其它存活的 TiKV 节点 Raft 日志落后,此时只有这个配置了较大的 election timeout tick 的 TiKV 节点上的 Region 能成为 Leader。由于此 TiKV 节点上的 Region 需要至少等待 raftstore.raft-min-election-timeout-ticks 设置的时间后才能发起选举,因此尽量避免将此配置值设置得过大,以免在这种场景下影响集群的可用性。

PD 参数

  • PD 元数据信息记录 TiKV 集群的拓扑信息,根据四个维度调度 Raft Group 副本。

    replication.location-labels: ["zone","dc","rack","host"]
  • 调整 Raft Group 的副本数据量为 5,保证集群的高可用性。

    replication.max-replicas: 5
  • 拒绝异地机房 TiKV 的 Raft 副本选举为 Leader。

    label-property: reject-leader: - key: "dc" value: "sha"

有关 Label 的使用和 Raft Group 副本数量,详见通过拓扑 label 进行副本调度

文档内容是否有帮助?

下载 PDF文档反馈社区交流修改本文
产品
TiDB
TiDB Cloud
© 2024 PingCAP. All Rights Reserved.
Privacy Policy.