Sign InTry Free

TiCDC Overview

TiCDC is a tool for replicating the incremental data of TiDB. This tool is implemented by pulling TiKV change logs. It can restore data to a consistent state with any upstream TSO, and provides TiCDC Open Protocol to support other systems to subscribe to data changes.

TiCDC Architecture

When TiCDC is running, it is a stateless node that achieves high availability through etcd in PD. The TiCDC cluster supports creating multiple replication tasks to replicate data to multiple different downstream platforms.

The architecture of TiCDC is shown in the following figure:

TiCDC architecture

System roles

  • TiKV CDC component: Only outputs key-value (KV) change logs.

    • Assembles KV change logs in the internal logic.
    • Provides the interface to output KV change logs. The data sent includes real-time change logs and incremental scan change logs.
  • capture: The operating process of TiCDC. Multiple captures form a TiCDC cluster that replicates KV change logs.

    • Each capture pulls a part of KV change logs.
    • Sorts the pulled KV change log(s).
    • Restores the transaction to downstream or outputs the log based on the TiCDC open protocol.

Replication features

This section introduces the replication features of TiCDC.

Sink support

Currently, the TiCDC sink component supports replicating data to the following downstream platforms:

  • Databases compatible with MySQL protocol. The sink component provides the final consistency support.
  • Kafka based on the TiCDC Open Protocol. The sink component ensures the row-level order, final consistency or strict transactional consistency.
  • cdclog (experimental): Files written on the local filesystem or on the Amazon S3-compatible storage.
  • Apache Pulsar (experimental)

Ensure replication order and consistency

Replication order

  • For all DDL or DML statements, TiCDC outputs them at least once.

  • When the TiKV or TiCDC cluster encounters failure, TiCDC might send the same DDL/DML statement repeatedly. For duplicated DDL/DML statements:

    • MySQL sink can execute DDL statements repeatedly. For DDL statements that can be executed repeatedly in the downstream, such as truncate table, the statement is executed successfully. For those that cannot be executed repeatedly, such as create table, the execution fails, and TiCDC ignores the error and continues the replication.
    • Kafka sink sends messages repeatedly, but the duplicate messages do not affect the constraints of Resolved Ts. Users can filter the duplicated messages from Kafka consumers.

Replication consistency

  • MySQL sink

    • TiCDC does not split single-table transactions and ensures the atomicity of single-table transactions.
    • TiCDC does not ensure that the execution order of downstream transactions is the same as that of upstream transactions.
    • TiCDC splits cross-table transactions in the unit of table and does not ensure the atomicity of cross-table transactions.
    • TiCDC ensures that the order of single-row updates is consistent with that in the upstream.
  • Kafka sink

    • TiCDC provides different strategies for data distribution. You can distribute data to different Kafka partitions based on the table, primary key, or timestamp.
    • For different distribution strategies, the different consumer implementations can achieve different levels of consistency, including row-level consistency, eventual consistency, or cross-table transactional consistency.
    • TiCDC does not have an implementation of Kafka consumers, but only provides TiCDC Open Protocol. You can implement the Kafka consumer according to this protocol.

Restrictions

TiCDC only replicates the table that has at least one valid index. A valid index is defined as follows:

  • The primary key (PRIMARY KEY) is a valid index.
  • The unique index (UNIQUE INDEX) that meets the following conditions at the same time is a valid index:
    • Every column of the index is explicitly defined as non-nullable (NOT NULL).
    • The index does not have the virtual generated column (VIRTUAL GENERATED COLUMNS).

Since v4.0.8, TiCDC supports replicating tables without a valid index by modifying the task configuration. However, this compromises the guarantee of data consistency to some extent. For more details, see Replicate tables without a valid index.

Unsupported scenarios

Currently, The following scenarios are not supported:

  • The TiKV cluster that uses RawKV alone.
  • The DDL operation CREATE SEQUENCE and the SEQUENCE function in TiDB. When the upstream TiDB uses SEQUENCE, TiCDC ignores SEQUENCE DDL operations/functions performed upstream. However, DML operations using SEQUENCE functions can be correctly replicated.

TiCDC only provides partial support for scenarios of large transactions in the upstream. For details, refer to FAQ: Does TiCDC support replicating large transactions? Is there any risk?.

Notice for compatibility issues

Incompatibility issue caused by using the TiCDC v5.0.0-rc cdc cli tool to operate a v4.0.x cluster

When using the cdc cli tool of TiCDC v5.0.0-rc to operate a v4.0.x TiCDC cluster, you might encounter the following abnormal situations:

  • If the TiCDC cluster is v4.0.8 or an earlier version, using the v5.0.0-rc cdc cli tool to create a replication task might cause cluster anomalies and get the replication task stuck.

  • If the TiCDC cluster is v4.0.9 or a later version, using the v5.0.0-rc cdc cli tool to create a replication task will cause the old value and unified sorter features to be unexpectedly enabled by default.

Solutions: Use the cdc executable file corresponding to the TiCDC cluster version to perform the following operations:

  1. Delete the changefeed created using the v5.0.0-rc cdc cli tool. For example, run the tiup cdc:v4.0.9 cli changefeed remove -c xxxx --pd=xxxxx --force command.
  2. If the replication task is stuck, restart the TiCDC cluster. For example, run the tiup cluster restart <cluster_name> -R cdc command.
  3. Re-create the changefeed. For example, run the tiup cdc:v4.0.9 cli changefeed create --sink-uri=xxxx --pd=xxx command.

Install and deploy TiCDC

You can either deploy TiCDC along with a new TiDB cluster or add the TiCDC component to an existing TiDB cluster. For details, see Deploy TiCDC.

Manage TiCDC Cluster and Replication Tasks

Currently, you can use the cdc cli tool to manage the status of a TiCDC cluster and data replication tasks. For details, see:

Troubleshoot TiCDC

For details, refer to Troubleshoot TiCDC.

TiCDC Open Protocol

TiCDC Open Protocol is a row-level data change notification protocol that provides data sources for monitoring, caching, full-text indexing, analysis engines, and primary-secondary replication between different databases. TiCDC complies with TiCDC Open Protocol and replicates data changes of TiDB to third-party data medium such as MQ (Message Queue). For more information, see TiCDC Open Protocol.

Compatibility notes for sort-dir and data-dir

The sort-dir configuration is used to specify the temporary file directory for the TiCDC sorter. Its functionalities might vary in different versions. The following table lists sort-dir's compatibility changes across versions.

Versionsort-engine functionalityNoteRecommendation
v4.0.11 or an earlier v4.0 version, v5.0.0-rcIt is a changefeed configuration item and specifies temporary file directory for the file sorter and unified sorter.In these versions, file sorter and unified sorter are experimental features and NOT recommended for the production environment.

If multiple changefeeds use the unified sorter as its sort-engine, the actual temporary file directory might be the sort-dir configuration of any changefeed, and the directory used for each TiCDC node might be different.
It is not recommended to use unified sorter in the production environment.
v4.0.12, v4.0.13, v5.0.0, and v5.0.1It is a configuration item of changefeed or of cdc server.By default, the sort-dir configuration of a changefeed does not take effect, and the sort-dir configuration of cdc server defaults to /tmp/cdc_sort. It is recommended to only configure cdc server in the production environment.

If you use TiUP to deploy TiCDC, it is recommended to use the latest TiUP version and set sorter.sort-dir in the TiCDC server configuration.

The unified sorter is enabled by default in v4.0.13, v5.0.0, and v5.0.1. If you want to upgrade your cluster to these versions, make sure that you have correctly configured sorter.sort-dir in the TiCDC server configuration.
You need to configure sort-dir using the cdc server command-line parameter (or TiUP).
v4.0.14 and later v4.0 versions, v5.0.3 and later v5.0 versions, later TiDB versionssort-dir is deprecated. It is recommended to configure data-dir.You can configure data-dir using the latest version of TiUP. In these TiDB versions, unified sorter is enabled by default. Make sure that data-dir has been configured correctly when you upgrade your cluster. Otherwise, /tmp/cdc_data will be used by default as the temporary file directory.

If the storage capacity of the device where the directory is located is insufficient, the problem of insufficient hard disk space might occur. In this situation, the previous sort-dir configuration of changefeed will become invalid.
You need to configure data-dir using the cdc server command-line parameter (or TiUP).

Was this page helpful?

Download PDFRequest docs changesAsk questions on Discord
Playground
New
One-stop & interactive experience of TiDB's capabilities WITHOUT registration.
Products
TiDB
TiDB Dedicated
TiDB Serverless
Pricing
Get Demo
Get Started
© 2024 PingCAP. All Rights Reserved.
Privacy Policy.