Sign InTry Free

TiKV Control User Guide

TiKV Control (tikv-ctl) is a command line tool of TiKV, used to manage the cluster. Its installation directory is as follows:

  • If the cluster is deployed using TiUP, tikv-ctl directory is in the in ~/.tiup/components/ctl/{VERSION}/ directory.

Use TiKV Control in TiUP

tikv-ctl is also integrated in the tiup command. Execute the following command to call the tikv-ctl tool:

tiup ctl:v<CLUSTER_VERSION> tikv
Starting component `ctl`: /home/tidb/.tiup/components/ctl/v4.0.8/ctl tikv TiKV Control (tikv-ctl) Release Version: 4.0.8 Edition: Community Git Commit Hash: 83091173e960e5a0f5f417e921a0801d2f6635ae Git Commit Branch: heads/refs/tags/v4.0.8 UTC Build Time: 2020-10-30 08:40:33 Rust Version: rustc 1.42.0-nightly (0de96d37f 2019-12-19) Enable Features: jemalloc mem-profiling portable sse protobuf-codec Profile: dist_release A tool for interacting with TiKV deployments. USAGE: TiKV Control (tikv-ctl) [FLAGS] [OPTIONS] [SUBCOMMAND] FLAGS: -h, --help Prints help information --skip-paranoid-checks Skip paranoid checks when open rocksdb -V, --version Prints version information OPTIONS: --ca-path <ca-path> Set the CA certificate path --cert-path <cert-path> Set the certificate path --config <config> TiKV config path, by default it's <deploy-dir>/conf/tikv.toml --data-dir <data-dir> TiKV data directory path, check <deploy-dir>/scripts/ to get it --decode <decode> Decode a key in escaped format --encode <encode> Encode a key in escaped format --to-hex <escaped-to-hex> Convert an escaped key to hex key --to-escaped <hex-to-escaped> Convert a hex key to escaped key --host <host> Set the remote host --key-path <key-path> Set the private key path --log-level <log-level> Set the log level [default: warn] --pd <pd> Set the address of pd SUBCOMMANDS: bad-regions Get all regions with corrupt raft cluster Print the cluster id compact Compact a column family in a specified range compact-cluster Compact the whole cluster in a specified range in one or more column families consistency-check Force a consistency-check for a specified region decrypt-file Decrypt an encrypted file diff Calculate difference of region keys from different dbs dump-snap-meta Dump snapshot meta file encryption-meta Dump encryption metadata fail Inject failures to TiKV and recovery help Prints this message or the help of the given subcommand(s) metrics Print the metrics modify-tikv-config Modify tikv config, eg. tikv-ctl --host ip:port modify-tikv-config -n rocksdb.defaultcf.disable-auto-compactions -v true mvcc Print the mvcc value print Print the raw value raft Print a raft log entry raw-scan Print all raw keys in the range recover-mvcc Recover mvcc data on one node by deleting corrupted keys recreate-region Recreate a region with given metadata, but alloc new id for it region-properties Show region properties scan Print the range db range size Print region size split-region Split the region store Print the store id tombstone Set some regions on the node to tombstone by manual unsafe-recover Unsafely recover the cluster when the majority replicas are failed

You can add corresponding parameters and subcommands after tiup ctl:v<CLUSTER_VERSION> tikv.

General options

tikv-ctl provides two operation modes:

  • Remote mode: use the --host option to accept the service address of TiKV as the argument

    For this mode, if SSL is enabled in TiKV, tikv-ctl also needs to specify the related certificate file. For example:

    tikv-ctl --ca-path ca.pem --cert-path client.pem --key-path client-key.pem --host <subcommands>

    However, sometimes tikv-ctl communicates with PD instead of TiKV. In this case, you need to use the --pd option instead of --host. Here is an example:

    tikv-ctl --pd compact-cluster
    store:"" compact db:KV cf:default range:([], []) success!
  • Local mode:

    • Use the --data-dir option to specify the local TiKV data directory path.
    • Use the --config option to specify the local TiKV configuration file path.

    In this mode, you need to stop the running TiKV instance.

Unless otherwise noted, all commands support both the remote mode and the local mode.

Additionally, tikv-ctl has two simple commands --to-hex and --to-escaped, which are used to make simple changes to the form of the key.

Generally, use the escaped form of the key. For example:

tikv-ctl --to-escaped 0xaaff \252\377 tikv-ctl --to-hex "\252\377" AAFF

Subcommands, some options and flags

This section describes the subcommands that tikv-ctl supports in detail. Some subcommands support a lot of options. For all details, run tikv-ctl --help <subcommand>.

View information of the Raft state machine

Use the raft subcommand to view the status of the Raft state machine at a specific moment. The status information includes two parts: three structs (RegionLocalState, RaftLocalState, and RegionApplyState) and the corresponding Entries of a certain piece of log.

Use the region and log subcommands to obtain the above information respectively. The two subcommands both support the remote mode and the local mode at the same time.

For the region subcommand:

  • To specify the Regions to be viewed, use the -r option. Multiple Regions are separated by ,. You can also use the --all-regions option to view all Regions. Note that -r and --all-regions cannot be used at the same time.
  • To limit the number of Regions to be printed, use the --limit option (default: 16).
  • To query which Regions are included in a certain key range, use the --start and --end options (default: no range limit, in Hex format).

For example, to print the Region with the ID 1239, use the following command:

tikv-ctl --host raft region -r 1239

The output is as follows:

"region id": 1239 "region state": { id: 1239, start_key: 7480000000000000FF4E5F728000000000FF1443770000000000FA, end_key: 7480000000000000FF4E5F728000000000FF21C4420000000000FA, region_epoch: {conf_ver: 1 version: 43}, peers: [ {id: 1240 store_id: 1 role: Voter} ] } "raft state": { hard_state {term: 8 vote: 5 commit: 7} last_index: 8) } "apply state": { applied_index: 8 commit_index: 8 commit_term: 8 truncated_state {index: 5 term: 5} }

To query which Regions are included in a certain key range, use the following command:

  • If the key range is in a Region range, the Region information is output.
  • If the key range is the same as a Region range, for example, when the given key range is the same as the Region 1239, because the Region range is a left-closed and right-open interval, and Region 1009 takes the end_key of Region 1239 as the start_key, the Region 1009 information is also output.
tikv-ctl --host raft region --start 7480000000000000FF4E5F728000000000FF1443770000000000FA --end 7480000000000000FF4E5F728000000000FF21C4420000000000FA

The output is as follows:

"region state": { id: 1009 start_key: 7480000000000000FF4E5F728000000000FF21C4420000000000FA, end_key: 7480000000000000FF5000000000000000F8, ... } "region state": { id: 1239 start_key: 7480000000000000FF4E5F728000000000FF06C6D60000000000FA, end_key: 7480000000000000FF4E5F728000000000FF1443770000000000FA, ... }

View the Region size

Use the size command to view the Region size:

tikv-ctl --data-dir /path/to/tikv size -r 2

The output is as follows:

region id: 2 cf default region size: 799.703 MB cf write region size: 41.250 MB cf lock region size: 27616

Scan to view MVCC of a specific range

The --from and --to options of the scan command accept two escaped forms of raw key, and use the --show-cf flag to specify the column families that you need to view.

tikv-ctl --data-dir /path/to/tikv scan --from 'zm' --limit 2 --show-cf lock,default,write
key: zmBootstr\377a\377pKey\000\000\377\000\000\373\000\000\000\000\000\377\000\000s\000\000\000\000\000\372 write cf value: start_ts: 399650102814441473 commit_ts: 399650102814441475 short_value: "20" key: zmDB:29\000\000\377\000\374\000\000\000\000\000\000\377\000H\000\000\000\000\000\000\371 write cf value: start_ts: 399650105239273474 commit_ts: 399650105239273475 short_value: "\000\000\000\000\000\000\000\002" write cf value: start_ts: 399650105199951882 commit_ts: 399650105213059076 short_value: "\000\000\000\000\000\000\000\001"

View MVCC of a given key

Similar to the scan command, the mvcc command can be used to view MVCC of a given key.

tikv-ctl --data-dir /path/to/tikv mvcc -k "zmDB:29\000\000\377\000\374\000\000\000\000\000\000\377\000H\000\000\000\000\000\000\371" --show-cf=lock,write,default
key: zmDB:29\000\000\377\000\374\000\000\000\000\000\000\377\000H\000\000\000\000\000\000\371 write cf value: start_ts: 399650105239273474 commit_ts: 399650105239273475 short_value: "\000\000\000\000\000\000\000\002" write cf value: start_ts: 399650105199951882 commit_ts: 399650105213059076 short_value: "\000\000\000\000\000\000\000\001"

In this command, the key is also the escaped form of raw key.

Scan raw keys

The raw-scan command scans directly from the RocksDB. Note that to scan data keys you need to add a 'z' prefix to keys.

Use --from and --to options to specify the range to scan (unbounded by default). Use --limit to limit at most how many keys to print out (30 by default). Use --cf to specify which cf to scan (can be default, write or lock).

tikv-ctl --data-dir /var/lib/tikv raw-scan --from 'zt' --limit 2 --cf default
key: "zt\200\000\000\000\000\000\000\377\005_r\200\000\000\000\000\377\000\000\001\000\000\000\000\000\372\372b2,^\033\377\364", value: "\010\002\002\002%\010\004\002\010root\010\006\002\000\010\010\t\002\010\n\t\002\010\014\t\002\010\016\t\002\010\020\t\002\010\022\t\002\010\024\t\002\010\026\t\002\010\030\t\002\010\032\t\002\010\034\t\002\010\036\t\002\010 \t\002\010\"\t\002\010s\t\002\010&\t\002\010(\t\002\010*\t\002\010,\t\002\010.\t\002\0100\t\002\0102\t\002\0104\t\002" key: "zt\200\000\000\000\000\000\000\377\025_r\200\000\000\000\000\377\000\000\023\000\000\000\000\000\372\372b2,^\033\377\364", value: "\010\002\002&slow_query_log_file\010\004\002P/usr/local/mysql/data/localhost-slow.log" Total scanned keys: 2

To print the value of a key, use the print command.

In order to record Region state details, TiKV writes some statistics into the SST files of Regions. To view these properties, run tikv-ctl with the region-properties sub-command:

tikv-ctl --host localhost:20160 region-properties -r 2
num_files: 0 num_entries: 0 num_deletes: 0 mvcc.min_ts: 18446744073709551615 mvcc.max_ts: 0 mvcc.num_rows: 0 mvcc.num_puts: 0 mvcc.num_versions: 0 mvcc.max_row_versions: 0 middle_key_by_approximate_size:

The properties can be used to check whether the Region is healthy or not. If not, you can use them to fix the Region. For example, splitting the Region manually by middle_key_approximate_size.

Compact data of each TiKV manually

Use the compact command to manually compact data of each TiKV.

  • Use the --from and --to options to specify the compaction range in the form of escaped raw key. If not set, the whole range will be compacted.

  • Use the --region option to compact the range of a specific region. If set, --from and --to will be ignored.

  • Use the -c option to specify the column family name. The default value is default. The optional values are default, lock, and write.

  • Use the -d option to specify the RocksDB that performs compaction. The default value is kv. The optional values are kv and raft.

  • Use the --threads option allows you to specify the concurrency for the TiKV compaction and its default value is 8. Generally, a higher concurrency comes with a faster compaction speed, which might yet affect the service. You need to choose an appropriate concurrency count based on your scenario.

  • Use the --bottommost option to include or exclude the bottommost files when TiKV performs compaction. The value options are default, skip, and force. The default value is default.

    • default means that the bottommost files are included only when the Compaction Filter feature is enabled.
    • skip means that the bottommost files are excluded when TiKV performs compaction.
    • force means that the bottommost files are always included when TiKV performs compaction.
  • To compact data in the local mode, use the following command:

    tikv-ctl --data-dir /path/to/tikv compact -d kv
  • To compact data in the remote mode, use the following command:

    tikv-ctl --host ip:port compact -d kv

Compact data of the whole TiKV cluster manually

Use the compact-cluster command to manually compact data of the whole TiKV cluster. The flags of this command have the same meanings and usage as those of the compact command. The only difference is as follows:

  • For the compact-cluster command, use --pd to specify the address of the PD, so that tikv-ctl can locate all TiKV nodes in the cluster as the compact target.
  • For the compact command, use --data-dir or --host to specify a single TiKV as the compact target.

Set a Region to tombstone

The tombstone command is usually used in circumstances where the sync-log is not enabled, and some data written in the Raft state machine is lost caused by power down.

In a TiKV instance, you can use this command to set the status of some Regions to tombstone. Then when you restart the instance, those Regions are skipped to avoid the restart failure caused by damaged Raft state machines of those Regions. Those Regions need to have enough healthy replicas in other TiKV instances to be able to continue the reads and writes through the Raft mechanism.

In general cases, you can remove the corresponding Peer of this Region using the remove-peer command:

pd-ctl operator add remove-peer <region_id> <store_id>

Then use the tikv-ctl tool to set a Region to tombstone on the corresponding TiKV instance to skip the health check for this Region at startup:

tikv-ctl --data-dir /path/to/tikv tombstone -p -r <region_id>

However, in some cases, you cannot easily remove this Peer of this Region from PD, so you can specify the --force option in tikv-ctl to forcibly set the Peer to tombstone:

tikv-ctl --data-dir /path/to/tikv tombstone -p -r <region_id>,<region_id> --force

Send a consistency-check request to TiKV

Use the consistency-check command to execute a consistency check among replicas in the corresponding Raft of a specific Region. If the check fails, TiKV itself panics. If the TiKV instance specified by --host is not the Region leader, an error is reported.

tikv-ctl --host consistency-check -r 2 success! tikv-ctl --host consistency-check -r 2 DebugClient::check_region_consistency: RpcFailure(RpcStatus { status: Unknown, details: Some("StringError(\"Leader is on store 1\")") })

Dump snapshot meta

This sub-command is used to parse a snapshot meta file at given path and print the result.

To avoid checking the Regions while TiKV is started, you can use the tombstone command to set the Regions where the Raft state machine reports an error to Tombstone. Before running this command, use the bad-regions command to find out the Regions with errors, so as to combine multiple tools for automated processing.

tikv-ctl --data-dir /path/to/tikv bad-regions
all regions are healthy

If the command is successfully executed, it prints the above information. If the command fails, it prints the list of bad Regions. Currently, the errors that can be detected include the mismatches between last index, commit index and apply index, and the loss of Raft log. Other conditions like the damage of snapshot files still need further support.

View Region properties

  • To view in local the properties of Region 2 on the TiKV instance that is deployed in /path/to/tikv:

    tikv-ctl --data-dir /path/to/tikv/data region-properties -r 2
  • To view online the properties of Region 2 on the TiKV instance that is running on

    tikv-ctl --host region-properties -r 2

Modify the TiKV configuration dynamically

You can use the modify-tikv-config command to dynamically modify the configuration arguments. Currently, the TiKV configuration items that can be dynamically modified and the detailed modification are consistent with modifying configuration using SQL statements. For details, see Modify TiKV configuration dynamically.

  • -n is used to specify the full name of the configuration item. For the list of configuration items that can be modified dynamically, see Modify TiKV configuration dynamically.
  • -v is used to specify the configuration value.

Set the size of shared block cache:

tikv-ctl --host ip:port modify-tikv-config -n storage.block-cache.capacity -v 10GB

When shared block cache is disabled, set block cache size for the write CF:

tikv-ctl --host ip:port modify-tikv-config -n rocksdb.writecf.block-cache-size -v 256MB
tikv-ctl --host ip:port modify-tikv-config -n raftdb.defaultcf.disable-auto-compactions -v true
tikv-ctl --host ip:port modify-tikv-config -n raftstore.sync-log -v false

When the compaction rate limit causes accumulated compaction pending bytes, disable the rate-limiter-auto-tuned mode or set a higher limit for the compaction flow:

tikv-ctl --host ip:port modify-tikv-config -n rocksdb.rate-limiter-auto-tuned -v false
tikv-ctl --host ip:port modify-tikv-config -n rocksdb.rate-bytes-per-sec -v "1GB"

Force Regions to recover services from failure of multiple replicas (deprecated)

You can use the unsafe-recover remove-fail-stores command to remove the failed machines from the peer list of Regions. Before running this command, you need to stop the service of the target TiKV store to release file locks.

The -s option accepts multiple store_id separated by comma and uses the -r flag to specify involved Regions. If you need to perform this operation on all Regions in a specific store, you can simply specify --all-regions.

tikv-ctl --data-dir /path/to/tikv unsafe-recover remove-fail-stores -s 3 -r 1001,1002
tikv-ctl --data-dir /path/to/tikv unsafe-recover remove-fail-stores -s 4,5 --all-regions

Then, after you restart TiKV, the Regions can continue providing services with the remaining healthy replicas. This command is commonly used when multiple TiKV stores are damaged or deleted.

Recover from MVCC data corruption

Use the recover-mvcc command in circumstances where TiKV cannot run normally caused by MVCC data corruption. It cross-checks 3 CFs ("default", "write", "lock") to recover from various kinds of inconsistency.

  • Use the -r option to specify involved Regions by region_id.
  • Use the -p option to specify PD endpoints.
tikv-ctl --data-dir /path/to/tikv recover-mvcc -r 1001,1002 -p success!

Ldb Command

The ldb command line tool offers multiple data access and database administration commands. Some examples are listed below. For more information, refer to the help message displayed when running tikv-ctl ldb or check the documents from RocksDB.

Examples of data access sequence:

To dump an existing RocksDB in HEX:

tikv-ctl ldb --hex --db=/tmp/db dump

To dump the manifest of an existing RocksDB:

tikv-ctl ldb --hex manifest_dump --path=/tmp/db/MANIFEST-000001

You can specify the column family that your query is against using the --column_family=<string> command line.

--try_load_options loads the database options file to open the database. It is recommended to always keep this option on when the database is running. If you open the database with default options, the LSM-tree might be messed up, which cannot be recovered automatically.

Dump encryption metadata

Use the encryption-meta subcommand to dump encryption metadata. The subcommand can dump two types of metadata: encryption info for data files, and the list of data encryption keys used.

To dump encryption info for data files, use the encryption-meta dump-file subcommand. You need to create a TiKV config file to specify data-dir for the TiKV deployment:

# conf.toml [storage] data-dir = "/path/to/tikv/data"

The --path option can be used to specify an absolute or relative path to the data file of interest. The command might give empty output if the data file is not encrypted. If --path is not provided, encryption info for all data files will be printed.

tikv-ctl --config=./conf.toml encryption-meta dump-file --path=/path/to/tikv/data/db/CURRENT
/path/to/tikv/data/db/CURRENT: key_id: 9291156302549018620 iv: E3C2FDBF63FC03BFC28F265D7E78283F method: Aes128Ctr

To dump data encryption keys, use the encryption-meta dump-key subcommand. In additional to data-dir, you also need to specify the current master key used in the config file. For how to config master key, refer to Encryption-At-Rest. Also with this command, the security.encryption.previous-master-key config will be ignored, and the master key rotation will not be triggered.

# conf.toml [storage] data-dir = "/path/to/tikv/data" [security.encryption.master-key] type = "kms" key-id = "0987dcba-09fe-87dc-65ba-ab0987654321" region = "us-west-2"

Note if the master key is a AWS KMS key, tikv-ctl needs to have access to the KMS key. Access to a AWS KMS key can be granted to tikv-ctl via environment variable, AWS default config file, or IAM role, whichever is suitable. Refer to AWS document for usage.

The --ids option can be used to specified a list of comma-separated data encryption key ids to print. If --ids is not provided, all data encryption keys will be printed, along with current key id, which is the id of the latest active data encryption key.

When using the command, you will see a prompt warning that the action will expose sensitive information. Type "I consent" to continue.

tikv-ctl --config=./conf.toml encryption-meta dump-key
This action will expose encryption key(s) as plaintext. Do not output the result in file on disk. Type "I consent" to continue, anything else to exit: I consent current key id: 9291156302549018620 9291156302549018620: key: 8B6B6B8F83D36BE2467ED55D72AE808B method: Aes128Ctr creation_time: 1592938357
tikv-ctl --config=./conf.toml encryption-meta dump-key --ids=9291156302549018620
This action will expose encryption key(s) as plaintext. Do not output the result in file on disk. Type "I consent" to continue, anything else to exit: I consent 9291156302549018620: key: 8B6B6B8F83D36BE2467ED55D72AE808B method: Aes128Ctr creation_time: 1592938357

Damaged SST files in TiKV might cause TiKV processes to panic. Before TiDB v6.1.0, these files cause TiKV to panic immediately. Since TiDB v6.1.0, TiKV processes panic 1 hour after SST files are damaged.

To clean up the damaged SST files, you can run the bad-ssts command in TiKV Control to show the needed information. The following is an example command and output.

tikv-ctl --data-dir </path/to/tikv> bad-ssts --pd <endpoint>
-------------------------------------------------------- corruption info: data/tikv-21107/db/000014.sst: Corruption: Bad table magic number: expected 9863518390377041911, found 759105309091689679 in data/tikv-21107/db/000014.sst sst meta: 14:552997[1 .. 5520]['0101' seq:1, type:1 .. '7A7480000000000000FF0F5F728000000000FF0002160000000000FAFA13AB33020BFFFA' seq:2032, type:1] at level 0 for Column family "default" (ID 0) it isn't easy to handle local data, start key:0101 overlap region: RegionInfo { region: id: 4 end_key: 7480000000000000FF0500000000000000F8 region_epoch { conf_ver: 1 version: 2 } peers { id: 5 store_id: 1 }, leader: Some(id: 5 store_id: 1) } refer operations: tikv-ctl ldb --db=/path/to/tikv/db unsafe_remove_sst_file 000014 tikv-ctl --data-dir=/path/to/tikv tombstone -r 4 --pd <endpoint> -------------------------------------------------------- corruption analysis has completed

From the output above, you can see that the information of the damaged SST file is printed first and then the meta-information is printed.

  • In the sst meta part, 14 means the SST file number; 552997 means the file size, followed by the smallest and largest sequence numbers and other meta-information.
  • The overlap region part shows the information of the Region involved. This information is obtained through the PD server.
  • The suggested operations part provides you suggestion to clean up the damaged SST file. You can take the suggestion to clean up files and restart the TiKV instance.

Get the state of a Region's RegionReadProgress

Starting from v6.5.4 and v7.3.0, TiKV introduces the get-region-read-progress subcommand to get up-to-date details of the resolver and RegionReadProgress. You need to specify a Region ID and a TiKV, which can be obtained from Grafana (Min Resolved TS Region and Min Safe TS Region) or DataIsNotReady logs.

  • --log (optional): If specified, TiKV logs the smallest start_ts of locks in the Region's resolver in this TiKV at INFO level. This option helps you identify locks that might block resolved-ts in advance.

  • --min-start-ts (optional): If specified, TiKV filters out locks with smaller start_ts than this value in logs. You can use this to specify a transaction of interest for logging. It defaults to 0, which means no filter.

The following is an example:

./tikv-ctl --host get-region-read-progress -r 14 --log --min-start-ts 0

The output is as follows:

Region read progress: exist: true, safe_ts: 0, applied_index: 92, pending front item (oldest) ts: 0, pending front item (oldest) applied index: 0, pending back item (latest) ts: 0, pending back item (latest) applied index: 0, paused: false, Resolver: exist: true, resolved_ts: 0, tracked index: 92, number of locks: 0, number of transactions: 0, stopped: false,

The subcommand is useful in diagnosing issues related to Stale Read and safe-ts. For details, see Understanding Stale Read and safe-ts in TiKV.

Was this page helpful?

Download PDFRequest docs changesAsk questions on Discord
One-stop & interactive experience of TiDB's capabilities WITHOUT registration.
TiDB Dedicated
TiDB Serverless
Get Demo
Get Started
© 2024 PingCAP. All Rights Reserved.
Privacy Policy.