Enable TLS between TiDB Clients and Servers
Non-encrypted connection between TiDB's server and clients is allowed by default, which enables third parties that monitor channel traffic to know the data sent and received between the server and the client, including query content and query results. If a channel is untrustworthy (such as if the client is connected to the TiDB server via a public network), then a non-encrypted connection is prone to information leakage. In this case, for security reasons, it is recommended to require an encrypted connection.
The TiDB server supports the encrypted connection based on the TLS (Transport Layer Security). The protocol is consistent with MySQL encrypted connections and is directly supported by existing MySQL clients such as MySQL Client, MySQL Shell and MySQL drivers. TLS is sometimes referred to as SSL (Secure Sockets Layer). Because the SSL protocol has known security vulnerabilities, TiDB does not support SSL. TiDB supports the following protocols: TLSv1.0, TLSv1.1, TLSv1.2 and TLSv1.3.
When an encrypted connection is used, the connection has the following security properties:
- Confidentiality: the traffic plaintext is encrypted to avoid eavesdropping
- Integrity: the traffic plaintext cannot be tampered
- Authentication: (optional) the client can verify the identity of the server and the server can verify the identity of the client to avoid man-in-the-middle attacks
To use connections secured with TLS, you first need to configure the TiDB server to enable TLS. Then you need to configure the client application to use TLS. Most client libraries enable TLS automatically when the server has TLS support configured correctly.
Similar to MySQL, TiDB allows TLS and non-TLS connections on the same TCP port. For a TiDB server with TLS enabled, you can choose to securely connect to the TiDB server through an encrypted connection, or to use an unencrypted connection. You can use the following ways to require the use of secure connections:
Configure the system variable
require_secure_transportto require secure connections to the TiDB server for all users.
REQUIRE SSLwhen you create a user (
create user), or modify an existing user (
alter user), which is to specify that specified users must use the encrypted connection to access TiDB. The following is an example of creating a user:
CREATE USER 'u1'@'%' IDENTIFIED BY 'my_random_password' REQUIRE SSL;
Configure TiDB server to use secure connections
See the following descriptions about the related parameters to enable secure connections:
auto-tls: enables automatic certificate generation (since v5.2.0)
ssl-cert: specifies the file path of the SSL certificate
ssl-key: specifies the private key that matches the certificate
ssl-ca: (optional) specifies the file path of the trusted CA certificate
tls-version: (optional) specifies the minimum TLS version, e.g. "TLSv1.2"
auto-tls allows secure connections but does not provide client certificate validation. For certificate validation, and to control how certificates are generated, see the advice on configuring the
ssl-ca variables below.
To enable secure connections with your own certificates in the TiDB server, you must specify both of the
ssl-key parameters in the configuration file when you start the TiDB server. You can also specify the
ssl-ca parameter for client authentication (see Enable authentication).
All the files specified by the parameters are in PEM (Privacy Enhanced Mail) format. Currently, TiDB does not support the import of a password-protected private key, so it is required to provide a private key file without a password. If the certificate or private key is invalid, the TiDB server starts as usual, but the client cannot connect to the TiDB server through an encrypted connection.
If the certificate parameters are correct, TiDB outputs
secure connection is enabled when started; otherwise, it outputs
secure connection is NOT ENABLED.
For TiDB versions earlier than v5.2.0, you can use
mysql_ssl_rsa_setup --datadir=./certs to generate certficates. The
mysql_ssl_rsa_setup tool is a part of MySQL Server.
Configure the MySQL client to use encrypted connections
The client of MySQL 5.7 or later versions attempts to establish an encrypted connection by default. If the server does not support encrypted connections, it automatically returns to unencrypted connections. The client of MySQL earlier than version 5.7 uses the unencrypted connection by default.
You can change the connection behavior of the client using the following
--ssl-mode=REQUIRED: The client requires an encrypted connection. The connection cannot be established if the server side does not support encrypted connections.
- In the absence of the
--ssl-modeparameter: The client attempts to use an encrypted connection, but the encrypted connection cannot be established if the server side does not support encrypted connections. Then the client uses an unencrypted connection.
--ssl-mode=DISABLED: The client uses an unencrypted connection.
MySQL 8.0 clients have two SSL modes in addition to this parameter:
--ssl-mode=VERIFY_CA: Validates the certificate from the server against the CA that requires
--ssl-mode=VERIFY_IDENTITY: The same as
VERIFY_CA, but also validating whether the hostname you are connecting to matches the certificate.
For more information, see Client-Side Configuration for Encrypted Connections in MySQL.
ssl-ca parameter is not specified in the TiDB server or MySQL client, the client or the server does not perform authentication by default and cannot prevent man-in-the-middle attack. For example, the client might "securely" connect to a disguised client. You can configure the
ssl-ca parameter for authentication in the server and client. Generally, you only need to authenticate the server, but you can also authenticate the client to further enhance the security.
To authenticate the TiDB server from the MySQL client:
- Specify the
ssl-keyparameters in the TiDB server.
- Specify the
--ssl-caparameter in the MySQL client.
- Specify the
VERIFY_CAat least in the MySQL client.
- Make sure that the certificate (
ssl-cert) configured in the TiDB server is signed by the CA specified by the client
--ssl-caparameter; otherwise, the authentication fails.
- Specify the
To authenticate the MySQL client from the TiDB server:
- Specify the
ssl-caparameters in the TiDB server.
- Specify the
--ssl-keyparameters in the client.
- Make sure the server-configured certificate and the client-configured certificate are both signed by the
ssl-caspecified by the server.
- Specify the
- To perform mutual authentication, meet both of the above requirements.
By default, the server-to-client authentication is optional. Even if the client does not present its certificate of identification during the TLS handshake, the TLS connection can be still established. You can also require the client to be authenticated by specifying
require x509 when creating a user (
create user), granting permissions (
grant), or modifying an existing user (
alter user). The following is an example of creating a user:
create user 'u1'@'%' require x509;
Check whether the current connection uses encryption
SHOW STATUS LIKE "%Ssl%"; statement to get the details of the current connection, including whether encryption is used, the encryption protocol used by encrypted connections and the TLS version number.
See the following example of the result in an encrypted connection. The results change according to different TLS versions or encryption protocols supported by the client.
mysql> SHOW STATUS LIKE "%Ssl%"; ...... | Ssl_verify_mode | 5 | | Ssl_version | TLSv1.2 | | Ssl_cipher | ECDHE-RSA-AES128-GCM-SHA256 | ......
For the official MySQL client, you can also use the
\s statement to view the connection status:
mysql> \s ... SSL: Cipher in use is ECDHE-RSA-AES128-GCM-SHA256 ...
Supported TLS versions, key exchange protocols, and encryption algorithms
The TLS versions, key exchange protocols and encryption algorithms supported by TiDB are determined by the official Golang libraries.
The crypto policy for your operating system and the client library you are using might also impact the list of supported protocols and cipher suites.
Supported TLS versions
- TLSv1.0 (disabled by default)
tls-version configuration option can be used to limit the TLS versions that can be used.
The actual TLS versions that can be used depend on the OS crypto policy, MySQL client version and the SSL/TLS library that is used by the client.
Supported key exchange protocols and encryption algorithms
Reload certificate, key, and CA
To replace the certificate, the key or CA, first replace the corresponding files, then execute the
ALTER INSTANCE RELOAD TLS statement on the running TiDB instance to reload the certificate (
ssl-cert), the key (
ssl-key), and the CA (
ssl-ca) from the original configuration path. In this way, you do not need to restart the TiDB instance.
The newly loaded certificate, key, and CA take effect on the connection that is established after the statement is successfully executed. The connection established before the statement execution is not affected.
Since TiDB v5.2.0, you can use the
Ssl_server_not_before status variables to monitor the start and end dates of the validity of the certificate.
SHOW GLOBAL STATUS LIKE 'Ssl\_server\_not\_%';
+-----------------------+--------------------------+ | Variable_name | Value | +-----------------------+--------------------------+ | Ssl_server_not_after | Nov 28 06:42:32 2021 UTC | | Ssl_server_not_before | Aug 30 06:42:32 2021 UTC | +-----------------------+--------------------------+ 2 rows in set (0.0076 sec)