Sign InTry Free

Use BR to Back Up Cluster Data

This document describes how to back up TiDB cluster data in the following scenarios:

If you are not familiar with the backup and restore tools, it is recommended that you read the following documents to fully understand usage principles and methods of these tools:

If you need to back up a small amount of data (for example, less than 50 GB) and do not require high backup speed, you can use Dumpling to export data to implement backup. For detailed backup operations, see Use Dumpling to back up full data.

Back up TiDB cluster snapshots

A snapshot of a TiDB cluster contains only the latest and transactionally consistent data at a specific time. You can back up the latest or specified snapshot data of a TiDB cluster by running the br backup full command. To get help on this command, run the br backup full --help command.

Example: Back up the snapshot generated at 2022-01-30 07:42:23 to the 2022-01-30/ directory in the backup-data bucket of Amazon S3.

br backup full \ --pd "${PDIP}:2379" \ --backupts '2022-01-30 07:42:23' \ --storage "s3://backup-data/2022-01-30/" \ --ratelimit 128 \ --log-file backupfull.log

In the preceding command:

  • --backupts: The physical time of the snapshot. If data of this snapshot is processed by Garbage Collection (GC), the br backup command will exit with an error. If you leave this parameter unspecified, BR picks the snapshot corresponding to the backup start time.
  • --ratelimit: The maximum speed per TiKV performing backup tasks (in MiB/s).
  • --log-file: The target file for BR logging.

During backup, a progress bar is displayed in the terminal, as shown below. When the progress bar advances to 100%, the backup is complete.

br backup full \ --pd "${PDIP}:2379" \ --storage "s3://backup-data/2022-01-30/" \ --ratelimit 128 \ --log-file backupfull.log Full Backup <---------/................................................> 17.12%.

After the backup is completed, BR compares the checksum of the backup data with the admin checksum table of the cluster to ensure data correctness and security.

Back up a database or a table

BR supports backing up partial data of a specified database or table from a cluster snapshot or incremental data backup. This feature allows you to filter out unwanted data from snapshot backup and incremental data backup, and back up only business-critical data.

Back up a database

To back up a database in a cluster, run the br backup db command. To get help on this command, run the br backup db --help command.

Example: Back up the test database to the db-test/2022-01-30/ directory in the backup-data bucket of Amazon S3.

br backup db \ --pd "${PDIP}:2379" \ --db test \ --storage "s3://backup-data/db-test/2022-01-30/" \ --ratelimit 128 \ --log-file backuptable.log

In the preceding command, --db specifies the database name, and other parameters are the same as those in Back up TiDB cluster snapshots.

Back up a table

To back up a table in a cluster, run the br backup table command. To get help on this command, run the br backup table --help command.

Example: Back up test.usertable to the table-db-usertable/2022-01-30/ directory in the backup-data bucket of Amazon S3.

br backup table \ --pd "${PDIP}:2379" \ --db test \ --table usertable \ --storage "s3://backup-data/table-db-usertable/2022-01-30/" \ --ratelimit 128 \ --log-file backuptable.log

In the preceding command, --db and --table specify the database name and table name respectively, and other parameters are the same as those in Back up TiDB cluster snapshots.

Back up multiple tables with table filter

To back up multiple tables with more criteria, run the br backup full command and specify the table filters with --filter or -f.

Example: Back up db*.tbl* data of a table to the table-filter/2022-01-30/ directory in the backup-data bucket of Amazon S3.

br backup full \ --pd "${PDIP}:2379" \ --filter 'db*.tbl*' \ --storage "s3://backup-data/table-filter/2022-01-30/" \ --ratelimit 128 \ --log-file backupfull.log

Back up data to external storage

BR supports backing up data to Amazon S3, Google Cloud Storage (GCS), Azure Blob Storage, NFS, or other S3-compatible file storage services. For details, see the following documents:

Back up incremental data

Incremental data of a TiDB cluster is differentiated data between the snapshot of a starting point and that of an end point. Compared with snapshot data, incremental data is smaller and therefore it is a supplementary to snapshot backup, which reduces the volume of backup data.

To back up incremental data, run the br backup command with the last backup timestamp --lastbackupts specified. To get --lastbackupts, run the validate command. The following is an example:

LAST_BACKUP_TS=`br validate decode --field="end-version" -s s3://backup-data/2022-01-30/ | tail -n1`
br backup full\ --pd ${PDIP}:2379 \ --ratelimit 128 \ --storage "s3://backup-data/2022-01-30/incr" \ --lastbackupts ${LAST_BACKUP_TS}

The preceding command backs up the incremental data between (LAST_BACKUP_TS, current PD timestamp] and the DDLs generated during this time period. When restoring incremental data, BR restores all DDLs first, and then restores data.

Encrypt backup data

BR supports encrypting backup data at the backup end and at the storage end when backing up to Amazon S3. You can choose either encryption method as required.

Encrypt backup data at the backup end

Since TiDB v5.3.0, you can encrypt backup data by configuring the following parameters:

  • --crypter.method: Encryption algorithm, which can be aes128-ctr, aes192-ctr, or aes256-ctr. The default value is plaintext, indicating that data is not encrypted.
  • --crypter.key: Encryption key in hexadecimal string format. It is a 128-bit (16 bytes) key for the algorithm aes128-ctr, 24-byte key for the algorithm aes192-ctr, and 32-byte key for the algorithm aes256-ctr.
  • --crypter.key-file: The key file. You can directly pass in the file path where the key is stored as a parameter without passing in "crypter.key".

Example: Encrypt backup data at the backup end.

br backup full\ --pd ${PDIP}:2379 \ --storage "s3://backup-data/2022-01-30/" \ --crypter.method aes128-ctr \ --crypter.key 0123456789abcdef0123456789abcdef

Encrypt backup data when backing up to Amazon S3

BR supports server-side encryption (SSE) when backing up data to S3. In this scenario, you can use AWS KMS keys you have created to encrypt data. For details, see BR S3 server-side encryption.

Backup performance and impact

The backup feature has some impact on cluster performance (transaction latency and QPS). However, you can mitigate the impact by adjusting the number of backup threads backup.num-threads or by adding more clusters.

To illustrate the impact of backup, this document lists the test conclusions of several snapshot backup tests:

  • (5.3.0 and earlier) When the backup threads of BR on a TiKV node takes up 75% of the total CPU of the node, the QPS is reduced by 30% of the original QPS.
  • (5.4.0 and later) When there are no more than 8 threads of BR on a TiKV node and the cluster's total CPU utilization does not exceed 80%, the impact of BR tasks on the cluster (write and read) is 20% at most.
  • (5.4.0 and later) When there are no more than 8 threads of BR on a TiKV node and the cluster's total CPU utilization does not exceed 75%, the impact of BR tasks on the cluster (write and read) is 10% at most.
  • (5.4.0 and later) When there are no more than 8 threads of BR on a TiKV node and the cluster's total CPU utilization does not exceed 60%, BR tasks has little impact on the cluster (write and read).

You can mitigate impact on cluster performance by reducing the number of backup threads. However, this might cause backup performance to deteriorate. Based on the preceding test results: (On a single TiKV node) the backup speed is proportional to the number of backup threads. When the number of threads is small, the backup speed is about 20 MB/thread. For example, a single node with 5 backup threads can deliver a backup speed of 100 MB/s.

Since v5.3.0, BR introduces the auto tunning feature (enabled by default) to adjust the number of backup threads. It can maintain the CPU utilization of the cluster below 80% during backup tasks. For details, see BR Auto-Tune.

Download PDF
Playground
New
One-stop & interactive experience of TiDB's capabilities WITHOUT registration.
Products
TiDB
TiDB Dedicated
TiDB Serverless
Pricing
Get Demo
Get Started
© 2024 PingCAP. All Rights Reserved.
Privacy Policy.