Sign InTry Free

Configure TiFlash

This document introduces the configuration parameters related to the deployment and use of TiFlash.

PD scheduling parameters

You can adjust the PD scheduling parameters using pd-ctl. Note that you can use tiup ctl:<cluster-version> pd to replace pd-ctl -u <pd_ip:pd_port> when using tiup to deploy and manage your cluster.

  • replica-schedule-limit: determines the rate at which the replica-related operator is generated. The parameter affects operations such as making nodes offline and add replicas.

    Notes:

    The value of this parameter should be less than that of region-schedule-limit. Otherwise, the normal Region scheduling among TiKV nodes is affected.

  • store-balance-rate: limits the rate at which Regions of each TiKV/TiFlash store are scheduled. Note that this parameter takes effect only when the stores have newly joined the cluster. If you want to change the setting for existing stores, use the following command.

    • Execute the pd-ctl -u <pd_ip:pd_port> store limit <store_id> <value> command to set the scheduling rate of a specified store. (To get store_id, you can execute the pd-ctl -u <pd_ip:pd_port> store command.
    • If you do not set the scheduling rate for Regions of a specified store, this store inherits the setting of store-balance-rate.
    • You can execute the pd-ctl -u <pd_ip:pd_port> store limit command to view the current setting value of store-balance-rate.
  • replication.location-labels: indicates the topological relationship of TiKV instances. The order of the keys indicates the layering relationship of different labels. If TiFlash is enabled, you need to use pd-ctl config placement-rules to set the default value. For details, see geo-distributed-deployment-topology.

TiFlash configuration parameters

This section introduces the configuration parameters of TiFlash.

Configure the tiflash.toml file

## The listening host for supporting services such as TPC/HTTP. It is recommended to configure it as "0.0.0.0", which means to listen on all IP addresses of this machine. listen_host = "0.0.0.0" ## The TiFlash TCP service port. tcp_port = 9000 ## The TiFlash HTTP service port. http_port = 8123 ## The cache size limit of the metadata of a data block. Generally, you do not need to change this value. mark_cache_size = 5368709120 ## The cache size limit of the min-max index of a data block. Generally, you do not need to change this value. minmax_index_cache_size = 5368709120 ## The cache size limit of the DeltaIndex. The default value is 0, which means no limit. delta_index_cache_size = 0 ## The storage path of TiFlash data. If there are multiple directories, separate each directory with a comma. ## `path` and `path_realtime_mode` are deprecated since v4.0.9. Use the configurations ## in the `[storage]` section to get better performance in the multi-disk deployment scenarios # path = "/tidb-data/tiflash-9000" ## or # path = "/ssd0/tidb-data/tiflash,/ssd1/tidb-data/tiflash,/ssd2/tidb-data/tiflash" ## The default value is `false`. If you set it to `true` and multiple directories ## are set in the path, the latest data is stored in the first directory and older ## data is stored in the rest directories. # path_realtime_mode = false ## The path in which the TiFlash temporary files are stored. Usually, it is set to the first directory in `path` ## or in `storage.latest.dir` appended with "/tmp". tmp_path = "/tidb-data/tiflash-9000/tmp" ## Storage paths settings take effect starting from v4.0.9 [storage] ## [Experimental] New in v5.0. This item limits the total write rate of background tasks in bytes per second. It is not recommended to use this experimental feature in a production environment. ## The unit is bytes. Currently, the setting such as "10GB" is not supported. ## The default value is 0, which means no limit. ## This parameter is used to control the usage of machine disk bandwidth by background tasks mainly for the scenario where TiFlash is deployed on the AWS EBS (gp2/gp3) disk. ## This parameter can be used to improve the stability of the TiFlash query performance. The recommended configuration in this scenario is 50% of the disk bandwidth. ## It is not recommended to modify this configuration in other scenarios. bg_task_io_rate_limit = 0 [storage.main] ## The list of directories to store the main data. More than 90% of the total data is stored in ## the directory list. dir = [ "/tidb-data/tiflash-9000" ] ## or # dir = [ "/ssd0/tidb-data/tiflash", "/ssd1/tidb-data/tiflash" ] ## The maximum storage capacity of each directory in `storage.main.dir`. ## If it is not set, or is set to multiple 0, the actual disk (the disk where the directory is located) capacity is used. ## Note that human-readable numbers such as "10GB" are not supported yet. ## Numbers are specified in bytes. ## The size of the `capacity` list should be the same with the `dir` size. ## For example: # capacity = [ 10737418240, 10737418240 ] [storage.latest] ## The list of directories to store the latest data. About 10% of the total data is stored in ## the directory list. The directories (or directory) listed here require higher IOPS ## metrics than those in `storage.main.dir`. ## If it is not set (by default), the values of `storage.main.dir` are used. # dir = [ ] ## The maximum storage capacity of each directory in `storage.latest.dir`. ## If it is not set, or is set to multiple 0, the actual disk (the disk where the directory is located) capacity is used. # capacity = [ 10737418240, 10737418240 ] [flash] tidb_status_addr = TiDB status port and address. # Multiple addresses are separated with commas. service_addr = The listening address of TiFlash Raft services and coprocessor services. ## Multiple TiFlash nodes elect a master to add or delete placement rules to PD, ## and the configurations in `flash.flash_cluster` control this process. [flash.flash_cluster] refresh_interval = Master regularly refreshes the valid period. update_rule_interval = Master regularly gets the status of TiFlash replicas and interacts with PD. master_ttl = The valid period of the elected master. cluster_manager_path = The absolute path of the pd buddy directory. log = The pd buddy log path. [flash.proxy] addr = The listening address of proxy. advertise-addr = The external access address of addr. If it is left empty, addr is used by default. data-dir = The data storage path of proxy. config = The proxy configuration file path. log-file = The proxy log path. log-level = The proxy log level. "info" is used by default. status-addr = The listening address from which the proxy metrics | status information is pulled. advertise-status-addr = The external access address of status-addr. If it is left empty, status-addr is used by default. [logger] level = log level (available options: trace, debug, information, warning, error). log = The TiFlash log path. errorlog = The TiFlash error log path. size = The size of a single log file. count = The maximum number of log files to save. [raft] ## PD service address. Multiple addresses are separated with commas. pd_addr = "10.0.1.11:2379,10.0.1.12:2379,10.0.1.13:2379" [status] metrics_port = The port through which Prometheus pulls metrics information. [profiles] [profiles.default] ## The default value is `true`. This parameter determines whether the segment ## of DeltaTree Storage Engine uses logical split. ## Using the logical split can reduce the write amplification, and improve the write speed. ## However, these are at the cost of disk space waste. dt_enable_logical_split = true ## The memory usage limit for the generated intermediate data when a single ## coprocessor query is executed. The default value is 0, which means no limit. max_memory_usage = 0 ## The memory usage limit for the generated intermediate data when all queries ## are executed. The default value is 0 (in bytes), which means no limit. max_memory_usage_for_all_queries = 0 ## New in v5.0. This item specifies the maximum number of cop requests that TiFlash Coprocessor executes at the same time. If the number of requests exceeds the specified value, the exceeded requests will queue. If the configuration value is set to 0 or not set, the default value is used, which is twice the number of physical cores. cop_pool_size = 0 ## New in v5.0. This item specifies the maximum number of batch requests that TiFlash Coprocessor executes at the same time. If the number of requests exceeds the specified value, the exceeded requests will queue. If the configuration value is set to 0 or not set, the default value is used, which is twice the number of physical cores. batch_cop_pool_size = 0 ## Security settings take effect starting from v4.0.5. [security] ## New in v5.0. This configuration item enables or disables log redaction. If the configuration value ## is set to `true`, all user data in the log will be replaced by `?`. ## Note that you also need to set `security.redact-info-log` for tiflash-learner's logging in tiflash-learner.toml. # redact_info_log = false ## Path of the file that contains a list of trusted SSL CAs. If set, the following settings ## `cert_path` and `key_path` are also needed. # ca_path = "/path/to/ca.pem" ## Path of the file that contains X509 certificate in PEM format. # cert_path = "/path/to/tiflash-server.pem" ## Path of the file that contains X509 key in PEM format. # key_path = "/path/to/tiflash-server-key.pem"

Configure the tiflash-learner.toml file

[server] engine-addr = The external access address of the TiFlash coprocessor service. [raftstore] ## Specifies the number of threads that handle snapshots. ## The default number is 2. ## If you set it to 0, the multi-thread optimization is disabled. snap-handle-pool-size = 2 ## Specifies the shortest interval at which Raft store persists WAL. ## You can properly increase the latency to reduce IOPS usage. ## The default value is "4ms". ## If you set it to 0ms, the optimization is disabled. store-batch-retry-recv-timeout = "4ms" [security] ## New in v5.0. This configuration item enables or disables log redaction. ## If the configuration value is set to true, ## all user data in the log will be replaced by ?. The default value is false. redact-info-log = false

In addition to the items above, other parameters are the same as those of TiKV. Note that the label whose key is engine is reserved and cannot be configured manually.

Multi-disk deployment

TiFlash supports multi-disk deployment. If there are multiple disks in your TiFlash node, you can make full use of those disks by configuring the parameters described in the following sections. For TiFlash's configuration template to be used for TiUP, see The complex template for the TiFlash topology.

Multi-disk deployment with TiDB version earlier than v4.0.9

For TiDB clusters earlier than v4.0.9, TiFlash only supports storing the main data of the storage engine on multiple disks. You can set up a TiFlash node on multiple disks by specifying the path (data_dir in TiUP) and path_realtime_mode configuration.

If there are multiple data storage directories in path, separate each with a comma. For example, /nvme_ssd_a/data/tiflash,/sata_ssd_b/data/tiflash,/sata_ssd_c/data/tiflash. If there are multiple disks in your environment, it is recommended that each directory corresponds to one disk and you put disks with the best performance at the front to maximize the performance of all disks.

If there are multiple disks with similar I/O metrics on your TiFlash node, you can leave the path_realtime_mode parameter to the default value (or you can explicitly set it to false). It means that data will be evenly distributed among all storage directories. However, the latest data is written only to the first directory, so the corresponding disk is busier than other disks.

If there are multiple disks with different I/O metrics on your TiFlash node, it is recommended to set path_realtime_mode to true and put disks with the best I/O metrics at the front of path. It means that the first directory only stores the latest data, and the older data are evenly distributed among the other directories. Note that in this case, the capacity of the first directory should be planned as 10% of the total capacity of all directories.

Multi-disk deployment with TiDB v4.0.9 or later

For TiDB clusters with v4.0.9 or later versions, TiFlash supports storing the main data and the latest data of the storage engine on multiple disks. If you want to deploy a TiFlash node on multiple disks, it is recommended to specify your storage directories in the [storage] section to make full use of your node. Note that the configurations earlier than v4.0.9 (path and path_realtime_mode) are still supported.

If there are multiple disks with similar I/O metrics on your TiFlash node, it is recommended to specify corresponding directories in the storage.main.dir list and leave storage.latest.dir empty. TiFlash will distribute I/O pressure and data among all directories.

If there are multiple disks with different I/O metrics on your TiFlash node, it is recommended to specify directories with higher metrics in the storage.latest.dir list, and specify directories with lower metrics in the storage.main.dir list. For example, for one NVMe-SSD and two SATA-SSDs, you can set storage.latest.dir to ["/nvme_ssd_a/data/tiflash"] and storage.main.dir to ["/sata_ssd_b/data/tiflash", "/sata_ssd_c/data/tiflash"]. TiFlash will distribute I/O pressure and data among these two directories list respectively. Note that in this case, the capacity of storage.latest.dir should be planned as 10% of the total planned capacity.

Was this page helpful?

Download PDFRequest docs changesAsk questions on Discord
Playground
New
One-stop & interactive experience of TiDB's capabilities WITHOUT registration.
Products
TiDB
TiDB Dedicated
TiDB Serverless
Pricing
Get Demo
Get Started
© 2024 PingCAP. All Rights Reserved.
Privacy Policy.